All Outputs (11)

Experimental detection using cyclostationary feature detectors for cognitive radios (2014)
Presentation / Conference Contribution
Zolfaghari, M., Fanan, A., Mehdawi, M., Riley, N. G., & Ammar, M. (2014, November). Experimental detection using cyclostationary feature detectors for cognitive radios. Presented at 2014 22nd Telecommunications Forum, TELFOR 2014 - Proceedings of Papers, Serbia, Belgrade

© 2014 IEEE. Signal detection is widely used in many applications. Some examples include Cognitive Radio (CR) and military intelligence. Without guaranteed signal detection, a CR cannot reliably perform its role. Spectrum sensing is currently one of... Read More about Experimental detection using cyclostationary feature detectors for cognitive radios.

Local barycentric coordinates (2014)
Presentation / Conference Contribution
Zhang, J., Deng, B., Liu, Z., Patanè, G., Bouaziz, S., Hormann, K., & Liu, L. Local barycentric coordinates

Barycentric coordinates yield a powerful and yet simple paradigm to interpolate data values on polyhedral domains. They represent interior points of the domain as an affine combination of a set of control points, defining an interpolation scheme for... Read More about Local barycentric coordinates.

Robotized task time scheduling and optimization based on Genetic Algorithms for non redundant industrial manipulators (2014)
Presentation / Conference Contribution
Baizid, K., Meddahi, A., Yousnadj, A., Chellali, R., Khan, H., & Iqbal, J. (2014, October). Robotized task time scheduling and optimization based on Genetic Algorithms for non redundant industrial manipulators. Presented at 2014 IEEE International Symposium on Robotic and Sensors Environments (ROSE), Timisoara, Romania

Industrial robot manipulators must work as fast as possible in order to increase the productivity. This goal could be achieved by increasing robots speed or/and optimizing the trajectories followed by robots while performing assembly, welding or simi... Read More about Robotized task time scheduling and optimization based on Genetic Algorithms for non redundant industrial manipulators.

Safety analysis of clinical workflows: The case of the workflow within a radiology department (2014)
Presentation / Conference Contribution
Gordon, N., Sharvia, S., Walker, M., & Al-Qora'n, L. Safety analysis of clinical workflows: The case of the workflow within a radiology department. Presented at 2014 Science and Information Conference

This paper was originally presented at the Science and Information Conference, 2014, 27-29 August, London. Abstract: Radiology Information Systems (RIS) and Picture Archiving and Communication systems (PACS) are used widely to help in the workflow ma... Read More about Safety analysis of clinical workflows: The case of the workflow within a radiology department.

Modeling and computed torque control of a 6 degree of freedom robotic arm (2014)
Presentation / Conference Contribution
Ullah, M. I., Ajwad, S. A., Islam, R. U., Iqbal, U., & Iqbal, J. (2014, April). Modeling and computed torque control of a 6 degree of freedom robotic arm. Presented at 2014 International Conference on Robotics and Emerging Allied Technologies in Engineering (iCREATE), Islamabad, Pakistan

This paper presents modelling and control design of ED 7220C - a vertical articulated serial arm having 5 revolute joints with 6 Degree Of Freedom. Both the direct and inverse kinematic models have been developed. For analysis of forces and to facili... Read More about Modeling and computed torque control of a 6 degree of freedom robotic arm.

Addressing collision avoidance and nonholonomic constraints of a wheeled robot: Modeling and simulation (2014)
Presentation / Conference Contribution
Zohaib, M., Pasha, S. M., Bushra, H., Hassan, K., & Iqbal, J. (2014, April). Addressing collision avoidance and nonholonomic constraints of a wheeled robot: Modeling and simulation. Presented at 2014 International Conference on Robotics and Emerging Allied Technologies in Engineering (iCREATE), Islamabad, Pakistan

This paper presents kinematic model of two configurations of a wheeled mobile robot. Two-wheeled robot with castor and four-wheeled robot are considered for modeling. Kinematic equations, modeled in MATLAB/Simulink, represent the position and angle o... Read More about Addressing collision avoidance and nonholonomic constraints of a wheeled robot: Modeling and simulation.

A tutorial on metamodelling for grammar researchers (2014)
Presentation / Conference Contribution
Paige, R. F., Kolovos, D. S., & Polack, F. A. A tutorial on metamodelling for grammar researchers

A metamodel has been defined as: a model of a model; a definition of a language; a description of abstract syntax; and a description of a domain. Because of these varied definitions, it is difficult to explain why metamodels are constructed, what can... Read More about A tutorial on metamodelling for grammar researchers.

Survey: A comparison of spectrum sensing techniques in cognitive radio (2014)
Presentation / Conference Contribution
Fanan, A., Riley, N., Mehdawi, M., Ammar, M., & Zolfaghari, M. (2014, January). Survey: A comparison of spectrum sensing techniques in cognitive radio. Presented at International Conference Image Processing, Computers and Industrial Engineering

In the present day Cognitive Radio has become a realistic option for solution of the spectrum scarcity problem in wireless communication. One of the most challenging issues in cognitive radio systems is spectrum sensing concepts, which is considered... Read More about Survey: A comparison of spectrum sensing techniques in cognitive radio.

A Spectrum Sensing Test Bed based on Matlab and USRP2 (2014)
Presentation / Conference Contribution
Ammar, M., Mehdawi, M., Riley, N., Fanan, A., Paulson, K., & Zolfaghari, M. (2014, January). A Spectrum Sensing Test Bed based on Matlab and USRP2. Presented at International Conference on Machine Learning, Electrical and Mechanical Engineering

— The spectrum monitoring has gained new aspects with development of the software defined radio SDR as its very important issue in the spectrum management area. In this paper a spectrum monitoring technique with SDR is proposed, the setup of the prot... Read More about A Spectrum Sensing Test Bed based on Matlab and USRP2.

Using simulation to evaluate dynamic systems with weibull or lognormal distributions (2014)
Presentation / Conference Contribution
Edifor, E., Gordon, N., Walker, M., & Papadopoulos, Y. Using simulation to evaluate dynamic systems with weibull or lognormal distributions. Presented at Ninth International Conference on Dependability and Complex Systems DepCoS-RELCOMEX, Brunów, Poland

© Springer International Publishing Switzerland 2014. Most techniques for quantitatively analysing the temporal fault trees of safety-critical systems are used with the assumption that the systems under study have exponentially distributed component... Read More about Using simulation to evaluate dynamic systems with weibull or lognormal distributions.

GPU accelerating technique for rendering implicitly represented vasculatures (2014)
Presentation / Conference Contribution
Hong, Q., Wang, B., Li, Q., Li, Y., & Wu, Q. GPU accelerating technique for rendering implicitly represented vasculatures. Presented at 2nd International Conference on Biomedical Engineering and Biotechnology, Wuhan, China

With the flooding datasets of medical Computed Tomography (CT) and Magnetic Resonance Imaging (MRI), implicit modeling techniques are increasingly applied to reconstruct the human organs, especially the vasculature. However, displaying implicitly rep... Read More about GPU accelerating technique for rendering implicitly represented vasculatures.