Skip to main content

Research Repository

Advanced Search

Insights from easternmost Tethys: Slab rollback, mantle exhumation, and UHT metamorphism in Eastern Indonesia (2018)
Conference Proceeding
Pownall, J., Hall, R., Forster, M., & Lister, G. (2018). Insights from easternmost Tethys: Slab rollback, mantle exhumation, and UHT metamorphism in Eastern Indonesia. In EGU General Assembly Conference Abstracts

The collision of Australia with SE Asia around 23 million years ago marked the closure of the eastern Tethys. Continued convergence of these two continents has since resulted in a complex array of active subduction zones, young mountain belts, and ne... Read More about Insights from easternmost Tethys: Slab rollback, mantle exhumation, and UHT metamorphism in Eastern Indonesia.

Effect of inorganic ions on pyrite catalyzed Fenton reaction (2018)
Conference Proceeding
Escobar Castillo, M., Gad-Allah, T. A., Ali, M. E. M., Salem, A. H., Khalil, A. S., Francesconi, M. G., & Lupascu, D. C. (2018). Effect of inorganic ions on pyrite catalyzed Fenton reaction. In Proceedings of the 4th World Congress on New Technologies (NewTech'18). https://doi.org/10.11159/icepr18.145

© 2018, Avestia Publishing. Industrial wastewaters contain not only organic pollutants but also considerable amounts of inorganic ions that may affect the efficiency of wastewater remediation processes. Thus, it is important to study the influence of... Read More about Effect of inorganic ions on pyrite catalyzed Fenton reaction.

A low-angle normal fault earthquake and tsunami: The 1852 Banda Sea Earthquake, Eastern Indonesia (2018)
Conference Proceeding
Pownall, J., Pranantyo, I., Cummins, P., & Griffin, J. (2018). A low-angle normal fault earthquake and tsunami: The 1852 Banda Sea Earthquake, Eastern Indonesia. In AGU Fall Meeting Abstracts

In November 1852, the Banda Islands, Eastern Indonesia suffered a devastating earthquake which was followed fifteen minutes later by a tsunami with up to eight meters height. Strong shaking was also felt on Ambon, Saparua, and Haruku Islands. The tsu... Read More about A low-angle normal fault earthquake and tsunami: The 1852 Banda Sea Earthquake, Eastern Indonesia.

Infinite Virtual Stoa (2018)
Conference Proceeding
Torrao, L., Papadopoulos, Y., & Mckie, D. (2018). Infinite Virtual Stoa. In XXI GENERATIVE ART 2018, proceedings of XXI Generative Art conference (183-194)

Stoicism is a philosophy that considers the object of life to be ataraxia (αταραξία), a state of psychological stability which is undisturbed by exposure to phenomena and circumstances that lie outside one's control. Such circumstances may include il... Read More about Infinite Virtual Stoa.

A dependability modeling and analysis approach for an IoP-based service system (2018)
Conference Proceeding
Mian, Z., Bottaci, L., Jiang, J., He, J., Yu, Q., & Wang, X. (2018). A dependability modeling and analysis approach for an IoP-based service system. In IEEE SmartWorld, Ubiquitous Intelligence & Computing, Advanced & Trusted Computing, Scalable Computing & Communications, Cloud & Big Data Computing, Internet of People and Smart City Innovation (SmartWorld/SCALCOM/UIC/ATC/CBDCom/IOP/SCI) (2036-2041). https://doi.org/10.1109/SmartWorld.2018.00341

The increasing use of the internet of people (IoP) based service systems has the potential to bring about substantial benefits to individuals. An IoP-based service system includes components such as cell phones, wearable devices, smart homes, cars et... Read More about A dependability modeling and analysis approach for an IoP-based service system.

Control of flexible joint robotic manipulator: Design and prototyping (2018)
Conference Proceeding
Alam, W., Ali, N., Wahaj Aziz, H. M., & Iqbal, J. (2018). Control of flexible joint robotic manipulator: Design and prototyping. In 2018 International Conference on Electrical Engineering (ICEE). https://doi.org/10.1109/ICEE.2018.8566796

Robots are now an integral part of automation sector, thus indicating the importance of the associated control strategies. In contrast with conventional rigid manipulators, flexible arms offer several benefits in terms of light weight and power effic... Read More about Control of flexible joint robotic manipulator: Design and prototyping.

TIMAEUS: Three-dimensional Illuminated Media Augmented Sculptures (2018)
Conference Proceeding
Torrao, L., Mckie, D., & Papadopoulos, Y. (2018). TIMAEUS: Three-dimensional Illuminated Media Augmented Sculptures. In Proceedings of 20th Generative Art Conference,Soddu C. and Colabella E. (eds), Domus Argenia (459-469)

TIMAEUS is a digital art studio environment that enables creation of personalised 3-dimensional sculptures built with expanding spherical volumes or interconnected tetrahedra and possibly other atomic blocks in the future. These sculptures can be cus... Read More about TIMAEUS: Three-dimensional Illuminated Media Augmented Sculptures.

Performance of lyotropic liquid crystal-based photoelectrochemical capacitors for solar-to- electrical energy conversion (2018)
Conference Proceeding
Halls, J. E., Ward, H. J., Althali, A. A., Testut, L., Kocsis, D., Alhassan, H. S., …Wadhawan, J. D. (2018). Performance of lyotropic liquid crystal-based photoelectrochemical capacitors for solar-to- electrical energy conversion. In F. Kongoli, H. Inufasa, M. Boutelle, R. Compton, J. Dubois, & F. Murad (Eds.), Sustainable Industrial Processing Summit SIPS2018 Volume 2. Amatore Intl. Symp. / on Electrochemistry for Sustainable Development (121-130)

Regenerative photoelectrochemical capacitors, adapted from a experimental system previously reported (J. E. Halls, J. D. Wadhawan, Energy Environ. Sci., 2012, 5, 6541) and based on the doping of a lamellar lyotropic liquid crystal with visible light... Read More about Performance of lyotropic liquid crystal-based photoelectrochemical capacitors for solar-to- electrical energy conversion.

Exploring environmental sustainability and performance of global logistics hubs (2018)
Conference Proceeding
Shaw, S., Grant, D., Hassan, S., & Creazza, A. (2018). Exploring environmental sustainability and performance of global logistics hubs.

Globalization has had different effects on the world since the concept emerged. Globalization impact on supply chains and logistics has revolutionized global trade. It has resulted in new levels of speed, efficiency, effectiveness and endless options... Read More about Exploring environmental sustainability and performance of global logistics hubs.

Development and validation of the Multidimensional Turnover Intentions Scale (2018)
Conference Proceeding
Menezes, I. G., Menezes, A. C., Ruggeri, K., Moraes, E. R., Lozado, J. A., Sandbrand, D., & Muszynski, P. (2018). Development and validation of the Multidimensional Turnover Intentions Scale. In BAM2018 Conference Proceedings: Driving productivity in uncertain and challenging times

The purpose of this study is to make available to researchers and practitioners a new instrument to measure turnover intentions based on a compensatory Multidimensional Item Response Theory (MIRT) model. Since extrinsic and intrinsic aspects are meas... Read More about Development and validation of the Multidimensional Turnover Intentions Scale.

Thin Implicit Utah Teapot: Design for Additive Manufacturing (2018)
Conference Proceeding
Qi, Q., & Li, Q. (2018). Thin Implicit Utah Teapot: Design for Additive Manufacturing. In 2018 IEEE International Conference on Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData) (1933-1940). https://doi.org/10.1109/Cybermatics_2018.2018.00320

© 2018 IEEE. Converting a surface-based geometric object into a thin solid is an essential requirement for additive manufacturing. Although offset surface and thickening techniques have been widely used for this task, it is in general difficult to mo... Read More about Thin Implicit Utah Teapot: Design for Additive Manufacturing.

Taxi model of unmanned aerial vehicle: Formulation and simulation (2018)
Conference Proceeding
Wasim, M., Ullah, M., & Iqbal, J. (2018). Taxi model of unmanned aerial vehicle: Formulation and simulation. In 2018 1st International Conference on Power, Energy and Smart Grid (ICPESG). https://doi.org/10.1109/ICPESG.2018.8384506

Unmanned Aerial Vehicles cannot work efficiently without a control system. Before any form of control is applied to it, modeling of the system is necessary. This work focuses on the development of a Taxi model of UAV. The reformulated model has been... Read More about Taxi model of unmanned aerial vehicle: Formulation and simulation.

CFD analysis and experimental validation of magnetic droplet generation and deflection across multilaminar flow streams (2018)
Conference Proceeding
Gómez-Pastora, J., Karampelas, I. H., Alorabi, A. Q., Tarn, M. D., Bringas, E., Iles, A., …Ortiz, I. (2018). CFD analysis and experimental validation of magnetic droplet generation and deflection across multilaminar flow streams. In Biotech, biomaterials and biomedical: TechConnect briefs 2018 (182-185)

© 2018 OOSV. All rights reserved. The use of droplet-based microfluidic systems has increased in the last decade due to the advantages these systems present such as compatibility with many chemical and biological reagents, capability of performing a... Read More about CFD analysis and experimental validation of magnetic droplet generation and deflection across multilaminar flow streams.

Design and analysis of 300MW solar configuration and its comparison with Quaid-e-Azam solar park (2018)
Conference Proceeding
Akram, I., Awais, M., Bashir, A., Khan, R. A. J., & Iqbal, J. (2018). Design and analysis of 300MW solar configuration and its comparison with Quaid-e-Azam solar park. In International Conference on Engineering and Emerging Technologies (ICEET). https://doi.org/10.1109/ICEET1.2018.8338638

Pakistan's recent energy crisis demands efficient utilization of renewable energy resources. The country, being richest with respect to solar potential, is experiencing a remarkable progress in power generation from Photovoltaic sources. Quaid-e-Azam... Read More about Design and analysis of 300MW solar configuration and its comparison with Quaid-e-Azam solar park.

International skills and competencies: tools for teaching in secondary education (2018)
Conference Proceeding
Jones, S. L. (2018). International skills and competencies: tools for teaching in secondary education. In INTED2018 Proceedings (4862-4866). https://doi.org/10.21125/inted.2018.0095

In a shrinking, more connected world where we all face common challenges, such as those posed by economic recessions, mass migration or climate change, the acquisition of international skills and transversal competencies has become increasingly impor... Read More about International skills and competencies: tools for teaching in secondary education.

Super twisting control algorithm for blood glucose regulation in type 1 diabetes patients (2018)
Conference Proceeding
Alam, W., Ali, N., Ahmad, S., & Iqbal, J. (2018). Super twisting control algorithm for blood glucose regulation in type 1 diabetes patients. In 15th International Bhurban Conference on Applied Sciences and Technology (IBCAST) (298-303). https://doi.org/10.1109/IBCAST.2018.8312239

This is an increasing belief that consequences due to hyperglycemia can be mitigated using a close loop control system. This paper investigates a robust non-linear control approach based on sliding mode control (SMC) algorithm for type 1 diabetes pat... Read More about Super twisting control algorithm for blood glucose regulation in type 1 diabetes patients.

Model order reduction of dynamical systems: An approach to investigate real and complex poles (2018)
Conference Proceeding
Bukhari, M., Ullah, M., Ali, M., & Iqbal, J. (2018). Model order reduction of dynamical systems: An approach to investigate real and complex poles. In 13th International Conference on Emerging Technologies (ICET). https://doi.org/10.1109/ICET.2017.8281748

The process of model order reduction facilitates analysis and realization of complex systems while marinating the essential properties of the system and input/output behavior. This research proposes a novel method for model order reduction. The novel... Read More about Model order reduction of dynamical systems: An approach to investigate real and complex poles.

Towards autonomous cleaning of photovoltaic modules: Design and realization of a robotic cleaner (2018)
Conference Proceeding
Hassan, M. U., Nawaz, M. I., & Iqbal, J. (2018). Towards autonomous cleaning of photovoltaic modules: Design and realization of a robotic cleaner. In 2017 1st International Conference on Latest Trends in Electrical Engineering and Computing Technologies (INTELLECT). https://doi.org/10.1109/INTELLECT.2017.8277631

Solar panels typically consist of photovoltaic (PV) cells covered by a protective glass coating, which generate electricity when subjected to radiations. However, the capability of electricity generation is constrained due to layer of dust on PV modu... Read More about Towards autonomous cleaning of photovoltaic modules: Design and realization of a robotic cleaner.

Feature extraction of garments based on Gaussian mixture for autonomous robotic manipulation (2018)
Conference Proceeding
Rasheed, T., Khan, A. A., & Iqbal, J. (2018). Feature extraction of garments based on Gaussian mixture for autonomous robotic manipulation. In 2017 1st International Conference on Latest Trends in Electrical Engineering and Computing Technologies (INTELLECT). https://doi.org/10.1109/INTELLECT.2017.8277629

Recent advancements in the domain of robotics have offered support to humans in their everyday activities with the aim of offloading workers from performing repetitive tasks. The present work highlights one such task in garment industry where the rob... Read More about Feature extraction of garments based on Gaussian mixture for autonomous robotic manipulation.