Skip to main content

Research Repository

Advanced Search

All Outputs (21)

Experimental and process modelling study of integration of a micro-turbine with an amine plant (2014)
Journal Article
Agbonghae, E. O., Best, T., Finney, K. N., Palma, C. F., Hughes, K. J., & Pourkashanian, M. (2014). Experimental and process modelling study of integration of a micro-turbine with an amine plant. Energy procedia, 63, 1064-1073. https://doi.org/10.1016/j.egypro.2014.11.114

An integrated model of a micro-turbine coupled to a CO2 capture plant has been developed with Aspen Plus, and validated with experimental data obtained from a Turbec T100 microturbine at the PACT facilities in the UKCCS Research Centre, Beighton, UK.... Read More about Experimental and process modelling study of integration of a micro-turbine with an amine plant.

Process simulation and thermodynamic analysis of a micro turbine with post-combustion CO2 capture and exhaust gas recirculation (2014)
Journal Article
Ali, U., Best, T., Finney, K. N., Palma, C. F., Hughes, K. J., Ingham, D. B., & Pourkashanian, M. (2014). Process simulation and thermodynamic analysis of a micro turbine with post-combustion CO2 capture and exhaust gas recirculation. Energy procedia, 63, 986-996. https://doi.org/10.1016/j.egypro.2014.11.107

With the effects of the emissions from power plants causing global climate change, the trend towards lower emission systems such as natural gas power plant is increasing. In this paper a Turbec T100 micro gas turbine is studied. The system is assesse... Read More about Process simulation and thermodynamic analysis of a micro turbine with post-combustion CO2 capture and exhaust gas recirculation.

Sensitivity to model geometry in finite element analyses of reconstructed skeletal structures: Experience with a juvenile pelvis (2014)
Journal Article
Watson, P. J., Fagan, M. J., & Dobson, C. A. (2015). Sensitivity to model geometry in finite element analyses of reconstructed skeletal structures: Experience with a juvenile pelvis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229(1), 9-19. https://doi.org/10.1177/0954411914564476

Biomechanical analysis of juvenile pelvic growth can be used in the evaluation of medical devices and investigation of hip joint disorders. This requires access to scan data of healthy juveniles, which are not always freely available. This article an... Read More about Sensitivity to model geometry in finite element analyses of reconstructed skeletal structures: Experience with a juvenile pelvis.

Experimental and numerical investigation of Helmholtz resonators and perforated liners as attenuation devices in industrial gas turbine combustors (2014)
Journal Article
Houston, B., Wang, J., Qin, Q., & Rubini, P. (2015). Experimental and numerical investigation of Helmholtz resonators and perforated liners as attenuation devices in industrial gas turbine combustors. Fuel, 151, 31-39. https://doi.org/10.1016/j.fuel.2014.12.001

This paper reports upon developments in the simulation of the passive control of combustion dynamics in industrial gas turbines using acoustic attenuation devices such as Helmholtz resonators and perforated liners. Combustion instability in gas turbi... Read More about Experimental and numerical investigation of Helmholtz resonators and perforated liners as attenuation devices in industrial gas turbine combustors.

In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures (2014)
Journal Article
Mi, J., Tan, D., & Lee, T. L. (2015). In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures. Metallurgical and Materials Transactions B, 46(4), 1615-1619. https://doi.org/10.1007/s11663-014-0256-z

Considerable progress has been made in studying the mechanism and effectiveness of using ultrasound waves to manipulate the solidification microstructures of metallic alloys. However, uncertainties remain in both the underlying physics of how microst... Read More about In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures.

An active fault tolerant control approach to an offshore wind turbine model (2014)
Journal Article
Shi, F., & Patton, R. (2015). An active fault tolerant control approach to an offshore wind turbine model. Renewable energy, 75(March), 788-798. https://doi.org/10.1016/j.renene.2014.10.061

The paper proposes an observer based active fault tolerant control (AFTC) approach to a non-linear large rotor wind turbine benchmark model. A sensor fault hiding and actuator fault compensation strategy is adopted in the design. The adapted observer... Read More about An active fault tolerant control approach to an offshore wind turbine model.

Fault estimation and active fault tolerant control for linear parameter varying descriptor systems (2014)
Journal Article
Shi, F., & Patton, R. J. (2015). Fault estimation and active fault tolerant control for linear parameter varying descriptor systems. International journal of robust and nonlinear control, 25(5), 689-706. https://doi.org/10.1002/rnc.3266

Starting with the baseline controller design, this paper proposes an integrated approach of active fault tolerant control based on proportional derivative extended state observer (PDESO) for linear parameter varying descriptor systems. The PDESO can... Read More about Fault estimation and active fault tolerant control for linear parameter varying descriptor systems.

Urban soundscape of recreational area in high population area (2014)
Journal Article
Choy, Y. S., Chau, C. K., Tsui, W. K., & Tang, S. K. (2014). Urban soundscape of recreational area in high population area. Acta Acustica united with Acustica, 100(6), 1044-1055. https://doi.org/10.3813/AAA.918784

Urban landscape or parks for recreational purposes are important components in urban area in Hong Kong but traffic noise can seriously affect their usability. To evaluate their usability practically, the Soundscape of recreational areas has to be exa... Read More about Urban soundscape of recreational area in high population area.

Full scale field study of sound transmission across plenum windows (2014)
Journal Article
Tong, Y. G., Tang, S. K., Kang, J., Fung, A., & Yeung, M. K. (2015). Full scale field study of sound transmission across plenum windows. Applied acoustics. Acoustique appliqué. Angewandte Akustik, 89, 244-253. https://doi.org/10.1016/j.apacoust.2014.10.003

A full scale field measurement of the acoustical insertion loss of plenum windows was carried out in the present investigation. Two identical mock-up test rooms with dimensions the same as those commonly adopted for Hong Kong public housing were buil... Read More about Full scale field study of sound transmission across plenum windows.

Modelling an off-grid integrated renewable energy system for rural electrification in India using photovoltaics and anaerobic digestion (2014)
Journal Article
Castellanos, J., Walker, M., Poggio, D., Pourkashanian, M., & Nimmo, W. (2015). Modelling an off-grid integrated renewable energy system for rural electrification in India using photovoltaics and anaerobic digestion. Renewable energy, 74, 390-398. https://doi.org/10.1016/j.renene.2014.08.055

This work describes the design optimisation and techno-economic analysis of an off-grid Integrated Renewable Energy System (IRES) designed to meet the electrical demand of a rural village location in West Bengal – India with an overall electrical req... Read More about Modelling an off-grid integrated renewable energy system for rural electrification in India using photovoltaics and anaerobic digestion.

Masticatory biomechanics in the rabbit: a multi-body dynamics analysis (2014)
Journal Article
Watson, P. J., Gröning, F., Curtis, N., Fitton, L. C., Herrel, A., McCormack, S. W., & Fagan, M. J. (2014). Masticatory biomechanics in the rabbit: a multi-body dynamics analysis. Journal of the Royal Society interface / the Royal Society, 11(99), Article 20140564. https://doi.org/10.1098/rsif.2014.0564

Multi-body dynamics is a powerful engineering tool which is becoming increasingly popular for the simulation and analysis of skull biomechanics. This paper presents the first application of multi-body dynamics to analyse the biomechanics of the rabbi... Read More about Masticatory biomechanics in the rabbit: a multi-body dynamics analysis.

Modeling the Water Scrubbing Process and Energy Requirements for CO2 Capture to Upgrade Biogas to Biomethane (2014)
Journal Article
Nock, W. J., Walker, M., Kapoor, R., & Heaven, S. (2014). Modeling the Water Scrubbing Process and Energy Requirements for CO2 Capture to Upgrade Biogas to Biomethane. Industrial & engineering chemistry research, 53(32), 12783-12792. https://doi.org/10.1021/ie501280p

Water scrubbing is the most widely used technology for removing CO2 from biogas and landfill gas. This work developed a rate-based mass transfer model of the CO2–water system for upgrading biogas in a packed bed absorption column. The simulated resul... Read More about Modeling the Water Scrubbing Process and Energy Requirements for CO2 Capture to Upgrade Biogas to Biomethane.

The biomechanical function of periodontal ligament fibres in orthodontic tooth movement (2014)
Journal Article
McCormack, S. W., Witzel, U., Watson, P. J., Fagan, M. J., & Gröning, F. (2014). The biomechanical function of periodontal ligament fibres in orthodontic tooth movement. PLoS ONE, 9(7), e102387. https://doi.org/10.1371/journal.pone.0102387

Orthodontic tooth movement occurs as a result of resorption and formation of the alveolar bone due to an applied load, but the stimulus responsible for triggering orthodontic tooth movement remains the subject of debate. It has been suggested that th... Read More about The biomechanical function of periodontal ligament fibres in orthodontic tooth movement.

Insertion losses of balconies on a building façade and the underlying wave interactions (2014)
Journal Article
Tang, S. K., Ho, C. Y., & Tso, T. Y. (2014). Insertion losses of balconies on a building façade and the underlying wave interactions. The Journal of the Acoustical Society of America, 136(1), 213-225. https://doi.org/10.1121/1.4883379

This study used scale model experiments to investigate the insertion losses of balconies on a building façade in the presence of ground reflections. The experiments measured both A-weighted broad- and narrowband insertion loss spectra. The underlying... Read More about Insertion losses of balconies on a building façade and the underlying wave interactions.

Active sensor fault tolerant output feedback tracking control for wind turbine systems via T-S model (2014)
Journal Article
Shaker, M. S., & Patton, R. J. (2014). Active sensor fault tolerant output feedback tracking control for wind turbine systems via T-S model. Engineering applications of artificial intelligence, 34, 1-12. https://doi.org/10.1016/j.engappai.2014.04.005

This paper presents a new approach to active sensor fault tolerant tracking control (FTTC) for offshore wind turbine (OWT) described via Takagi–Sugeno (T–S) multiple models. The FTTC strategy is designed in such way that aims to maintain nominal wind... Read More about Active sensor fault tolerant output feedback tracking control for wind turbine systems via T-S model.

The onset of plasticity of a Zr-based bulk metallic glass (2014)
Journal Article
Huang, Y., Khong, J. C., Connolley, T., & Mi, J. (2014). The onset of plasticity of a Zr-based bulk metallic glass. International Journal of Plasticity, 60, 87-100. https://doi.org/10.1016/j.ijplas.2014.05.003

The deformation behaviors of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glassy alloy under step-controlled tensile loads have been studied in situ and systematically using scanning electron microscopy and synchrotron X-ray diffraction. A circular h... Read More about The onset of plasticity of a Zr-based bulk metallic glass.

Aeroacoustics of duct junction flows merging at different angles (2014)
Journal Article
Lam, G. C., Leung, R. C., & Tang, S. K. (2014). Aeroacoustics of duct junction flows merging at different angles. Journal of Sound and Vibration, 333(18), 4187-4202. https://doi.org/10.1016/j.jsv.2014.04.045

This paper reports an exploratory study of the aeroacoustics of a merging flow at a duct junction with the same width in all branches and different merging angles. The focus is put on the acoustic generation due to the flow unsteadiness. The study is... Read More about Aeroacoustics of duct junction flows merging at different angles.

UHMWPE fibre-based composites : prestress-induced enhancement of impact properties (2014)
Journal Article
Fazal, A., & Fancey, K. (2014). UHMWPE fibre-based composites : prestress-induced enhancement of impact properties. Composites. Part B, Engineering, 66, 1-6. https://doi.org/10.1016/j.compositesb.2014.04.031

The impact properties of continuous unidirectional UHMWPE fibre-reinforced polyester resin composites have been investigated, to elucidate the effects of prestress on energy absorption characteristics. Prestress within composite samples was produced... Read More about UHMWPE fibre-based composites : prestress-induced enhancement of impact properties.

Validation of CE/SE scheme in low mach number direct aeroacoustic simulation (2014)
Journal Article
Lam, G. C., Leung, R. C., Seid, K. H., & Tang, S. K. (2014). Validation of CE/SE scheme in low mach number direct aeroacoustic simulation. International Journal of Nonlinear Sciences and Numerical Simulation, 15(2), 157-169. https://doi.org/10.1515/ijnsns-2012-0118

The space-time conservation element and solution element (CE/SE) scheme has caught many attentionin aeroacoustic research community as an alternative numerical strategy for direct aeroacoustic simulation (DAS).As a result of its strict conversation o... Read More about Validation of CE/SE scheme in low mach number direct aeroacoustic simulation.

The effect of cooling rate on the wear performance of a ZrCuAlAg bulk metallic glass (2014)
Journal Article
Huang, Y., Fan, H., Wang, D., Sun, Y., Liu, F., Shen, J., …Mi, J. (2014). The effect of cooling rate on the wear performance of a ZrCuAlAg bulk metallic glass. Materials and Design, 58, 284-289. https://doi.org/10.1016/j.matdes.2014.01.067

In the present work, the local atomic ordering and the wear performance of ZrCuAlAg bulk metallic glass (BMG) samples with different diameters have been studied using transmission electron microscopy (TEM) plus autocorrelation function analysis, and... Read More about The effect of cooling rate on the wear performance of a ZrCuAlAg bulk metallic glass.