Skip to main content

Research Repository

Advanced Search

All Outputs (71)

Characterization of the residual stresses in spray-formed steels using neutron diffraction (2015)
Journal Article
Lee, T. L., Mi, J., Zhao, S. L., Fan, J. F., Zhang, S. Y., Kabra, S., & Grant, P. S. (2015). Characterization of the residual stresses in spray-formed steels using neutron diffraction. Scripta materialia, 100, 82-85. https://doi.org/10.1016/j.scriptamat.2014.12.019

Neutron diffraction was used to characterize the residual stresses in an as-sprayed tube-shaped steel preform. The measured residual stress distributions were compared with those simulated using finite element method by taking into account the effect... Read More about Characterization of the residual stresses in spray-formed steels using neutron diffraction.

In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures (2014)
Journal Article
Mi, J., Tan, D., & Lee, T. L. (2015). In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures. Metallurgical and Materials Transactions B, 46(4), 1615-1619. https://doi.org/10.1007/s11663-014-0256-z

Considerable progress has been made in studying the mechanism and effectiveness of using ultrasound waves to manipulate the solidification microstructures of metallic alloys. However, uncertainties remain in both the underlying physics of how microst... Read More about In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures.

The onset of plasticity of a Zr-based bulk metallic glass (2014)
Journal Article
Huang, Y., Khong, J. C., Connolley, T., & Mi, J. (2014). The onset of plasticity of a Zr-based bulk metallic glass. International Journal of Plasticity, 60, 87-100. https://doi.org/10.1016/j.ijplas.2014.05.003

The deformation behaviors of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glassy alloy under step-controlled tensile loads have been studied in situ and systematically using scanning electron microscopy and synchrotron X-ray diffraction. A circular h... Read More about The onset of plasticity of a Zr-based bulk metallic glass.

The effect of cooling rate on the wear performance of a ZrCuAlAg bulk metallic glass (2014)
Journal Article
Huang, Y., Fan, H., Wang, D., Sun, Y., Liu, F., Shen, J., …Mi, J. (2014). The effect of cooling rate on the wear performance of a ZrCuAlAg bulk metallic glass. Materials and Design, 58, 284-289. https://doi.org/10.1016/j.matdes.2014.01.067

In the present work, the local atomic ordering and the wear performance of ZrCuAlAg bulk metallic glass (BMG) samples with different diameters have been studied using transmission electron microscopy (TEM) plus autocorrelation function analysis, and... Read More about The effect of cooling rate on the wear performance of a ZrCuAlAg bulk metallic glass.

Understanding the deformation mechanism of individual phases of a ZrTi-based bulk metallic glass matrix composite using in situ diffraction and imaging methods (2014)
Journal Article
Huang, Y., Khong, J. C., Connolley, T., & Mi, J. (2014). Understanding the deformation mechanism of individual phases of a ZrTi-based bulk metallic glass matrix composite using in situ diffraction and imaging methods. Applied physics letters, 104(3), Article 031912. https://doi.org/10.1063/1.4863095

The plasticity of a ZrTi-based bulk metallic glass composite consisting of glassy matrix and crystalline dendritic phase was studied in-situ under identical tensile loading conditions using scanning electron microscopy and synchrotron X-ray diffracti... Read More about Understanding the deformation mechanism of individual phases of a ZrTi-based bulk metallic glass matrix composite using in situ diffraction and imaging methods.

The interdendritic-melt solidification control (IMSC) and its effects on the porosity and phase change of a Ni-based superalloy (2013)
Journal Article
Zheng, L., Zhang, G., Xiao, C., Lee, T. L., Han, B., Li, Z., …Mi, J. (2014). The interdendritic-melt solidification control (IMSC) and its effects on the porosity and phase change of a Ni-based superalloy. Scripta materialia, 74, 84-87. https://doi.org/10.1016/j.scriptamat.2013.11.001

A novel interdendritic-melt solidification control (IMSC) technique is developed to manufacture equiaxed Ni-based superalloy with much reduced porosity. The basic concept of IMSC is illustrated. The effects of IMSC on the porosity and phases of IN792... Read More about The interdendritic-melt solidification control (IMSC) and its effects on the porosity and phase change of a Ni-based superalloy.

Phase field study of the tip operating state of a freely growing dendrite against convection using a novel parallel multigrid approach (2013)
Journal Article
Guo, Z., Mi, J., Xiong, S., & Grant, P. (2014). Phase field study of the tip operating state of a freely growing dendrite against convection using a novel parallel multigrid approach. Journal of Computational Physics, 257(A), 278-297. https://doi.org/10.1016/j.jcp.2013.10.004

Alloy dendrite growth during solidification with coupled thermal-solute-convection fields has been studied by phase field modeling and simulation. The coupled transport equations were solved using a novel parallel-multigrid numerical approach with hi... Read More about Phase field study of the tip operating state of a freely growing dendrite against convection using a novel parallel multigrid approach.

Rich tomography techniques for the analysis of microstructure and deformation (2013)
Journal Article
Baimpas, N., Xie, M., Song, X., Hofmann, F., Abbey, B., Marrow, J., …Korsunsky, A. M. (2014). Rich tomography techniques for the analysis of microstructure and deformation. International Journal of Computational Methods, 11(3), Article 1343006. https://doi.org/10.1142/S0219876213430068

Until very recently, the three-dimensionality of the material world presented numerous challenges in terms of characterization, data handling, visualization, and modeling. For this reason, 2D representation of sections, projections, or surfaces remai... Read More about Rich tomography techniques for the analysis of microstructure and deformation.

The effects of annealing on the microstructure and the dynamic mechanical strength of a ZrCuNiAl bulk metallic glass (2013)
Journal Article
Huang, Y., Zheng, W., Fan, H., Wang, D., Shen, J., & Mi, J. (2013). The effects of annealing on the microstructure and the dynamic mechanical strength of a ZrCuNiAl bulk metallic glass. Intermetallics, 42, 192-197. https://doi.org/10.1016/j.intermet.2013.07.001

Isothermal annealing has been applied to a bulk metallic glass alloy, Zr50.7Cu28Ni9Al12.3. Nanocrystalline precipitates, mainly consisting of Ni3Zr and Ni42Zr 58 phases, appear from the amorphous matrix when annealed at 743 K for different times, and... Read More about The effects of annealing on the microstructure and the dynamic mechanical strength of a ZrCuNiAl bulk metallic glass.

Phase field simulation of binary alloy dendrite growth under thermal- and forced-flow fields: An implementation of the parallel-multigrid approach (2013)
Journal Article
Guo, Z., Mi, J., Xiong, S., & Grant, P. S. (2013). Phase field simulation of binary alloy dendrite growth under thermal- and forced-flow fields: An implementation of the parallel-multigrid approach. Metallurgical and Materials Transactions B, 44(4), 924-937. https://doi.org/10.1007/s11663-013-9861-5

Dendrite growth and morphology evolution during solidification have been studied using a phase field model incorporating melt convection effects, which was solved using a robust and efficient parallel, multigrid computing approach. Single dendrite gr... Read More about Phase field simulation of binary alloy dendrite growth under thermal- and forced-flow fields: An implementation of the parallel-multigrid approach.

In situ study of the evolution of atomic strain of bulk metallic glass and its effects on shear band formation (2013)
Journal Article
Huang, Y. J., Khong, J. C., Connolley, T., & Mi, J. (2013). In situ study of the evolution of atomic strain of bulk metallic glass and its effects on shear band formation. Scripta materialia, 69(3), 207-210. https://doi.org/10.1016/j.scriptamat.2013.03.016

The tensile behavior of TiZrNiCuBe metallic glass was studied using synchrotron X-ray diffraction and scanning electron microscopy. Shear band formation was carefully controlled by the introduction of a stress gradient due to a semi-circular notch. M... Read More about In situ study of the evolution of atomic strain of bulk metallic glass and its effects on shear band formation.

High speed imaging study of the dynamics of ultrasonic bubbles at a liquid-solid interface (2013)
Journal Article
Tan, D., & Mi, J. (2013). High speed imaging study of the dynamics of ultrasonic bubbles at a liquid-solid interface. Materials Science Forum, 765, 230-234. https://doi.org/10.4028/www.scientific.net/MSF.765.230

High speed imaging, including the ultrafast synchrotron X-ray imaging facility at the beamline 32-ID-B of the Advanced Photon Source (APS), was used to study in-situ (1) the dynamics of ultrasonic bubbles inside a water suspension with an acoustic fi... Read More about High speed imaging study of the dynamics of ultrasonic bubbles at a liquid-solid interface.

Ultrafast X-ray imaging and modelling of ultrasonic cavitations in liquid metal (2013)
Journal Article
Lee, T. L., Khong, J. C., Fezzaa, K., & Mi, J. (2013). Ultrafast X-ray imaging and modelling of ultrasonic cavitations in liquid metal. Materials Science Forum, 765, 190-194. https://doi.org/10.4028/www.scientific.net/MSF.765.190

The dynamics of ultrasonic bubbles in liquid metal are captured in-situ for the first time using the ultrafast X-ray phase contrast imaging facility housed at the Advanced Photon Source, Argonne National Laboratory, in the USA. The experimental obser... Read More about Ultrafast X-ray imaging and modelling of ultrasonic cavitations in liquid metal.

Shear punching of a Ti-based bulk metallic glass (2012)
Journal Article
Huang, Y., Wang, D., Fan, H., Sun, J., Shen, J., & Mi, J. (2013). Shear punching of a Ti-based bulk metallic glass. Materials Science and Engineering: A, 561, 220-225. https://doi.org/10.1016/j.msea.2012.11.022

In the paper, the deformation of Ti40Zr25Ni3Cu12Be20 bulk metallic glass plate subjected to shear punching has been studied. The fractured surface of the punch-out disks consists of three characteristic zones, namely the deformation band, the fractur... Read More about Shear punching of a Ti-based bulk metallic glass.

A high-speed imaging and modeling study of dendrite fragmentation caused by ultrasonic cavitation (2012)
Journal Article
Shu, D., Sun, B., Mi, J., & Grant, P. S. (2012). A high-speed imaging and modeling study of dendrite fragmentation caused by ultrasonic cavitation. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 43(10), 3755-3766. https://doi.org/10.1007/s11661-012-1188-3

The dynamic behavior of ultrasound-induced cavitation bubbles and their effect on the fragmentation of dendritic grains of a solidifying succinonitrile 1 wt pct camphor organic transparent alloy have been studied experimentally using high-speed digit... Read More about A high-speed imaging and modeling study of dendrite fragmentation caused by ultrasonic cavitation.

Modelling the electromagnetic separation of non-metallic particles from liquid metal flowing through a two-stage multichannel (2011)
Journal Article
Shu, D., Mi, J., Wang, J., & Sun, B. (2011). Modelling the electromagnetic separation of non-metallic particles from liquid metal flowing through a two-stage multichannel. Isij International, 51(1), 21-26. https://doi.org/10.2355/isijinternational.51.21

A two-stage multichannel was designed to increase the efficiency of separating non-metallic particles from liquid metal flowing through an alternating magnetic field. Numerical method was developed to calculate the particle concentration and separati... Read More about Modelling the electromagnetic separation of non-metallic particles from liquid metal flowing through a two-stage multichannel.

An implicit parallel multigrid computing scheme to solve coupled thermal-solute phase-field equations for dendrite evolution (2011)
Journal Article
Guo, Z., Mi, J., & Grant, P. S. (2012). An implicit parallel multigrid computing scheme to solve coupled thermal-solute phase-field equations for dendrite evolution. Journal of Computational Physics, 231(4), 1781-1796. https://doi.org/10.1016/j.jcp.2011.11.006

An implicit, second-order space and time discretization scheme together with a parallel multigrid method involving a strip grid domain partitioning has been developed to solve fully coupled, nonlinear phase field equations involving solute and heat t... Read More about An implicit parallel multigrid computing scheme to solve coupled thermal-solute phase-field equations for dendrite evolution.

Gleeble experiments concerning dendrite re-melting and its role in microstructural evolution in spray formed high-alloy metals (2011)
Journal Article
Zhang, Y., Liu, N., Li, Z., Zhang, G., Yuan, H., Xu, W., …Mi, J. (2011). Gleeble experiments concerning dendrite re-melting and its role in microstructural evolution in spray formed high-alloy metals. Rare Metals, 30(SUPPL.1), 401-404. https://doi.org/10.1007/s12598-011-0312-7

An experimental approach was designed to understand dendrite fragmentation of atomized droplets deposition in spray materials, and to study the relationship between dendrite fragmentation behavior and subsequent microstructural evolution. A Gleeble 3... Read More about Gleeble experiments concerning dendrite re-melting and its role in microstructural evolution in spray formed high-alloy metals.

An Al-Si-Ti hierarchical metal-metal composite manufactured by co-spray forming (2011)
Journal Article
Kelly, A. J., Mi, J., Sinha, G. V., Krug, P., Crosa, F., Audebert, F., & Grant, P. S. (2011). An Al-Si-Ti hierarchical metal-metal composite manufactured by co-spray forming. Journal of Materials Processing Technology, 211(12), 2045-2049. https://doi.org/10.1016/j.jmatprotec.2011.07.001

Spray forming with co-injection of a solid particulate phase to form a homogeneous distribution within the final spray formed billet has been studied as a new route to manufacturing metal-metal composites at large scale with negligible oxide. 12 wt%T... Read More about An Al-Si-Ti hierarchical metal-metal composite manufactured by co-spray forming.

A quantitative study of solute diffusion field effects on heterogeneous nucleation and the grain size of alloys (2011)
Journal Article
Shu, D., Sun, B., Mi, J., & Grant, P. S. (2011). A quantitative study of solute diffusion field effects on heterogeneous nucleation and the grain size of alloys. Acta Materialia, 59(5), 2135-2144. https://doi.org/10.1016/j.actamat.2010.12.014

The nucleation ability of inoculating particles inside the solute diffusion zone around growing grains during alloy solidification is studied using a spherical, equiaxed dendritic grain model coupled with a new modified free growth model to predict t... Read More about A quantitative study of solute diffusion field effects on heterogeneous nucleation and the grain size of alloys.