All Outputs (44)

Tuning the Electrical and Solar Thermal Heating Efficiencies of Nanocarbon Aerogels (2020)
Journal Article
Xia, D., Xu, Y., Mannering, J., Ma, X., Ismail, M. S., Borman, D., …Menzel, R. (2021). Tuning the Electrical and Solar Thermal Heating Efficiencies of Nanocarbon Aerogels. Chemistry of materials : a publication of the American Chemical Society, 33(1), 392-402. https://doi.org/10.1021/acs.chemmater.0c04166

Nanocarbon aerogels display outstanding electrical and solar thermal heating efficiencies. However, little is known about the relationship between their microstructure and the heating performance. In this study, two different types of carbon nanotube... Read More about Tuning the Electrical and Solar Thermal Heating Efficiencies of Nanocarbon Aerogels.

Isothiocyanates: Promising Chemical Substance for Environmental Remediation (2020)
Book Chapter
Vashisht, D., & Ibhadon, A. (2021). Isothiocyanates: Promising Chemical Substance for Environmental Remediation. In S. K. Mehta, & S. Sharma  (Eds.), Spectrum of Isothiocyanate Chemistry and its Applications (271-292). New York: Nova Science Publishers

The lack of proper waste management as well as enforcement policies in many countries of the world have resulted in environmental pollution problems including the discharge of pollutants into water from many sources, including agriculture, tannery in... Read More about Isothiocyanates: Promising Chemical Substance for Environmental Remediation.

Atom efficient PtCu bimetallic catalysts and ultra dilute alloys for the selective hydrogenation of furfural (2020)
Journal Article
Taylor, M. J., Beaumont, S. K., Islam, M. J., Tsatsos, S., Parlett, C. A., Issacs, M. A., & Kyriakou, G. (2021). Atom efficient PtCu bimetallic catalysts and ultra dilute alloys for the selective hydrogenation of furfural. Applied catalysis. B, Environmental, 284, Article 119737. https://doi.org/10.1016/j.apcatb.2020.119737

A range of Pt:Cu bimetallic nanoparticles were investigated for the liquid-phase selective hydrogenation of furfural, an important platform biomass feedstock. Alloying of the two metals had a profound effect on the overall catalytic activity, providi... Read More about Atom efficient PtCu bimetallic catalysts and ultra dilute alloys for the selective hydrogenation of furfural.

Intra- and Inter-molecular Sulf- hydryl Hydrogen Bonding: Facilitating Proton Transfer Events for Determination of pH in Sea Water (2020)
Journal Article
Sisodia, N., Miranda, M., McGuinness, K. L., Wadhawan, J. D., & Lawrence, N. S. (in press). Intra- and Inter-molecular Sulf- hydryl Hydrogen Bonding: Facilitating Proton Transfer Events for Determination of pH in Sea Water. Electroanalysis, https://doi.org/10.1002/elan.202060332

© 2020 Wiley-VCH GmbH This work presents the electrochemical response of a 2-(methylthio)phenol glassy carbon based electrode for a promising voltammetric pH sensor in both buffered and low-buffered solutions. Electropolymerization of the redox speci... Read More about Intra- and Inter-molecular Sulf- hydryl Hydrogen Bonding: Facilitating Proton Transfer Events for Determination of pH in Sea Water.

Magnesium ferrite spinels as anode modifier for the treatment of Congo red and energy recovery in a single chambered microbial fuel cell (2020)
Journal Article
Khan, N., Anwer, A. H., Khan, M. D., Azam, A., Ibhadon, A., & Khan, M. Z. (in press). Magnesium ferrite spinels as anode modifier for the treatment of Congo red and energy recovery in a single chambered microbial fuel cell. Journal of hazardous materials, Article 124561. https://doi.org/10.1016/j.jhazmat.2020.124561

© 2020 Elsevier B.V. Magnesium Ferrite (MgFe2O4) spinel structures prepared by a solid-state reaction was used as an anode modifier in the microbial fuel cell (MFC) treatment of Congo red dye. The performance of the reactors with unmodified stainless... Read More about Magnesium ferrite spinels as anode modifier for the treatment of Congo red and energy recovery in a single chambered microbial fuel cell.

A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant (2020)
Journal Article
Michailos, S., Walker, M., Moody, A., Poggio, D., & Pourkashanian, M. (2021). A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant. Journal of Environmental Chemical Engineering, 9(1), Article 104735. https://doi.org/10.1016/j.jece.2020.104735

The aim of the present study is to assess the techno-economic viability of integrating biomethanation into power to gas systems in a real waste water treatment plant (WWTP). The research is the first attempt to assess the viability of several scenari... Read More about A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant.

A techno-enviro-economic assessment of a biomass fuelled micro-CCHP driven by a hybrid Stirling and ORC engine (2020)
Journal Article
Udeh, G. T., Michailos, S., Ingham, D., Hughes, K. J., Ma, L., & Pourkashanian, M. (2021). A techno-enviro-economic assessment of a biomass fuelled micro-CCHP driven by a hybrid Stirling and ORC engine. Energy Conversion and Management, 227, Article 113601. https://doi.org/10.1016/j.enconman.2020.113601

Stirling engines (SE) offer good part load performance and high heat sink temperatures which make it a suitable candidate to serve as a prime mover in micro-combined cooling, heating and power (μ-CCHP) applications. In this study, a novel μ-CCHP conf... Read More about A techno-enviro-economic assessment of a biomass fuelled micro-CCHP driven by a hybrid Stirling and ORC engine.

Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography (2020)
Journal Article
Zhang, Z., Khong, J. C., Koe, B., Luo, S., Huang, S., Qin, L., …Mi, J. (2021). Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography. Scripta materialia, 193, 71-76. https://doi.org/10.1016/j.scriptamat.2020.10.032

Synchrotron X-ray microtomography and ptychography were used to characterize the 3D network structure, morphology and distribution of metal carbides in an as-cast IN713LC Ni superalloy. MC typed carbides were found to distribute mainly on the grain b... Read More about Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography.

Inorganic fouling of heat transfer surface from potable water during convective heat transfer (2020)
Journal Article
Al-Gailani, A., Sanni, O., Charpentier, T. V., Crisp, R., Bruins, J. H., & Neville, A. (2021). Inorganic fouling of heat transfer surface from potable water during convective heat transfer. Applied thermal engineering, 184, Article 116271. https://doi.org/10.1016/j.applthermaleng.2020.116271

In this work, inorganic fouling of the heat transfer surfaces from potable water has been studied using a once-through flow cell to visualize and follow the deposition processes. The effects of surface material and flow rate on the amount and morphol... Read More about Inorganic fouling of heat transfer surface from potable water during convective heat transfer.

Esterification of residual palm oil using solid acid catalyst derived from rice husk (2020)
Journal Article
Semilin, V., Balan, W. S., Janaun, J., Chung, C. H., Zhu, Z., Haywood, S. K., …Zein, S. H. (2021). Esterification of residual palm oil using solid acid catalyst derived from rice husk. Journal of hazardous materials, 404(Part B), Article 124092. https://doi.org/10.1016/j.jhazmat.2020.124092

In this study, carbon-silica based acid catalysts derived from rice husks (RH) were successfully synthesised using microwave (MW) technology. The results showed that MW sulphonation produced Sulphur (S) content of 17.2–18.5 times higher than in raw R... Read More about Esterification of residual palm oil using solid acid catalyst derived from rice husk.

Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber (2020)
Journal Article
Semilin, V., Janaun, J., Chung, C. H., Touhami, D., Haywood, S. K., Chong, K. P., …Zein, S. H. (2021). Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber. Journal of hazardous materials, 404, Article 124144. https://doi.org/10.1016/j.jhazmat.2020.124144

Residual palm oil that goes into the river untreated can become detrimental to the environment. Residual oil discharge during milling process into palm oil mill effluent (POME) is unavoidable. About 1 wt% of residual oil in POME causes major problems... Read More about Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber.

Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers (2020)
Journal Article
Shan, L., Yan, J., Wang, Y., Ke, X., Cai, J., Yu, S., …Zhang, X. (2021). Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers. Catalysis Letters, https://doi.org/10.1007/s10562-020-03402-w

© 2020, Springer Science+Business Media, LLC, part of Springer Nature. Acid-catalyzed aqueous-phase hydrolysis of cellulose was investigated over zeolite HY nanocrystals grafted on anantase titania nanofibres (HY-TiO2). H-exchanged NaY zeolite nanocr... Read More about Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers.

Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass (2020)
Journal Article
Egwu, U., Sallis, P., & Oko, E. (2021). Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass. Fuel, 285, Article 119060. https://doi.org/10.1016/j.fuel.2020.119060

Nutrient supplementation could improve the biomethane production of different biomass feedstocks during anaerobic digestion. In this study, the impact of nutrient supplementation on the anaerobic digestion of the West African Gamba and Guinea Grass f... Read More about Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass.

Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study (2020)
Journal Article
Carcadea, E., Ismail, M. S., Ingham, D. B., Patularu, L., Schitea, D., Marinoiu, A., …Varlam, M. (2021). Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study. International Journal of Hydrogen Energy, 46(25), 13572-13582. https://doi.org/10.1016/j.ijhydene.2020.08.150

Various flow field designs have been numerically investigated to evaluate the effect of pattern and the cross-sectional dimensions of the channel on the performance of a large active area PEM fuel cell. Three types of multiple-serpentine channels (7-... Read More about Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study.

Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing (2020)
Journal Article
Ward, H. J., Ward, H. J., Armstrong-Telfer, T. A., Armstrong-Telfer, T. A., Kelly, S. M., Kelly, S. M., …Wadhawan, J. D. (2020). Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing. Journal of Electroanalytical Chemistry, 872, Article 114328. https://doi.org/10.1016/j.jelechem.2020.114328

In any manufacturing environment, it is always important to be able to embrace a culture of traceability of any non-conformed product. For the case of ink manufacture, operator confusion, leading to the mixing-up of solvents, or connecting the incorr... Read More about Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing.

Valorization of rice straw for ethylene and jet fuel production: A technoeconomic assessment (2020)
Book Chapter
Michailos, S., & Webb, C. (2020). Valorization of rice straw for ethylene and jet fuel production: A technoeconomic assessment. In M. R. Kosseva, & C. Webb (Eds.), Food Industry Wastes : Assessment and Recuperation of Commodities (201-221). (2nd ed.). London: Academic Press. https://doi.org/10.1016/B978-0-12-817121-9.00010-3

The goal of the present study is to exemplify ways to valorize lignocellulosic food waste within the biorefinery concept. Rice straw was selected as the feedstock of focus, but the presented methodologies can be extended to other similar materials su... Read More about Valorization of rice straw for ethylene and jet fuel production: A technoeconomic assessment.

The role of heterogeneous catalysts in the plasma-catalytic ammonia synthesis (2020)
Journal Article
Patil, B. S., Cherkasov, N., Srinath, N. V., Lang, J., Ibhadon, A. O., Wang, Q., & Hessel, V. (in press). The role of heterogeneous catalysts in the plasma-catalytic ammonia synthesis. Catalysis Today, https://doi.org/10.1016/j.cattod.2020.06.074

Ammonia, being the second largest produced industrial chemical, is used as a raw material for many chemicals. Besides, there is a growing interest in the applications of ammonia as electrical energy storage chemical, as fuel, and in selective catalyt... Read More about The role of heterogeneous catalysts in the plasma-catalytic ammonia synthesis.

Kinetic modelling of hydrogen transfer deoxygenation of a prototypical fatty acid over a bimetallic Pd60Cu40 catalyst: an investigation of the surface reaction mechanism and rate limiting step (2020)
Journal Article
Cheah, K. W., Yusup, S., Taylor, M. J., How, B. S., Osatiashtiani, A., Nowakowski, D. J., …Uemura, Y. (2020). Kinetic modelling of hydrogen transfer deoxygenation of a prototypical fatty acid over a bimetallic Pd60Cu40 catalyst: an investigation of the surface reaction mechanism and rate limiting step. Reaction Chemistry and Engineering, 5(9), 1682-1693. https://doi.org/10.1039/d0re00214c

Herein, for the first time, we demonstrate a novel continuous flow process involving the application of tetralin as a hydrogen donor solvent for the catalytic conversion of oleic acid to diesel-like hydrocarbons, using an efficient and stable carbon... Read More about Kinetic modelling of hydrogen transfer deoxygenation of a prototypical fatty acid over a bimetallic Pd60Cu40 catalyst: an investigation of the surface reaction mechanism and rate limiting step.

Synthesis of Biodegradable Polymers: A Review on the Use of Schiff-Base Metal Complexes as Catalysts for the Ring Opening Polymerization (ROP) of Cyclic Esters (2020)
Journal Article
Santoro, O., Zhang, X., & Redshaw, C. (2020). Synthesis of Biodegradable Polymers: A Review on the Use of Schiff-Base Metal Complexes as Catalysts for the Ring Opening Polymerization (ROP) of Cyclic Esters. Catalysts, 10(7), 1-49. https://doi.org/10.3390/catal10070800

This review describes the recent advances (from 2008 onwards) in the use of Schiff-base metal complexes as catalysts for the ring opening polymerization (ROP) of cyclic esters. The synthesis and structure of the metal complexes, as well as all aspect... Read More about Synthesis of Biodegradable Polymers: A Review on the Use of Schiff-Base Metal Complexes as Catalysts for the Ring Opening Polymerization (ROP) of Cyclic Esters.

Examining the effect of ionic constituents on crystallization fouling on heat transfer surfaces (2020)
Journal Article
Al-Gailani, A., Sanni, O., Charpentier, T. V., Crisp, R., Bruins, J. H., & Neville, A. (2020). Examining the effect of ionic constituents on crystallization fouling on heat transfer surfaces. International Journal of Heat and Mass Transfer, 160, Article 120180. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120180

The effect of the most abundant constituents in potable water on fouling of aluminium surface has been studied systematically in this work. The role of sodium, chloride, magnesium and sulphate ions and total organic carbon (TOC) on the fouling kineti... Read More about Examining the effect of ionic constituents on crystallization fouling on heat transfer surfaces.