All Outputs (94)

Environment friendly dual-frequency ultrasonic exfoliation of few-layer graphene (2021)
Journal Article
Tyurnina, A. V., Morton, J. A., Subroto, T., Khavari, M., Maciejewska, B., Mi, J., …Eskin, D. G. (2021). Environment friendly dual-frequency ultrasonic exfoliation of few-layer graphene. Carbon, 185, 536-545. https://doi.org/10.1016/j.carbon.2021.09.036

Ultrasound-aided liquid phase exfoliation (ULPE) of graphene in pure water is environment-friendly. Two limiting factors of ULPE are the non-uniform thickness of few-layer graphene (FLG) and a relatively low graphene yield. Here we describe ULPE in w... Read More about Environment friendly dual-frequency ultrasonic exfoliation of few-layer graphene.

Characterization of the Convoluted 3D Intermetallic Phases in a Recycled Al Alloy by Synchrotron X-ray Tomography and Machine Learning (2021)
Journal Article
Li, Z., Qin, L., Guo, B., Yuan, J., Zhang, Z., Li, W., & Mi, J. (2022). Characterization of the Convoluted 3D Intermetallic Phases in a Recycled Al Alloy by Synchrotron X-ray Tomography and Machine Learning. Acta Metallurgica Sinica (English Letters), 35(1), 115–123. https://doi.org/10.1007/s40195-021-01312-3

Fe-rich intermetallic phases in recycled Al alloys often exhibit complex and 3D convoluted structures and morphologies. They are the common detrimental intermetallic phases to the mechanical properties of recycled Al alloys. In this study, we used sy... Read More about Characterization of the Convoluted 3D Intermetallic Phases in a Recycled Al Alloy by Synchrotron X-ray Tomography and Machine Learning.

The correlation between X-ray scattering structure factor and shear bands density of a metallic glass and a composite (2021)
Journal Article
Zhang, C., Lee, T. L., Khong, J. C., Qiao, J. C., Daisenberger, D., Yao, Y., & Mi, J. (2021). The correlation between X-ray scattering structure factor and shear bands density of a metallic glass and a composite. Materials letters, 304, Article 130727. https://doi.org/10.1016/j.matlet.2021.130727

The tensile fractured surfaces of ZrTi-based bulk metallic glass and composite samples were studied using synchrotron X-ray total scattering. The scanned areas contain different shear bands densities. The shear bands create localized atomic strains,... Read More about The correlation between X-ray scattering structure factor and shear bands density of a metallic glass and a composite.

New insights into sono-exfoliation mechanisms of graphite: In situ high-speed imaging studies and acoustic measurements (2021)
Journal Article
Morton, J. A., Khavari, M., Qin, L., Maciejewska, B. M., Tyurnina, A. V., Grobert, N., …Tzanakis, I. (2021). New insights into sono-exfoliation mechanisms of graphite: In situ high-speed imaging studies and acoustic measurements. Materials Today, 49, 10-22. https://doi.org/10.1016/j.mattod.2021.05.005

The application of ultrasound and acoustic cavitation in liquid exfoliation of bulk layered materials is a widely used method. However, despite extensive research, the fundamental mechanisms remain far from being fully understood. A number of theorie... Read More about New insights into sono-exfoliation mechanisms of graphite: In situ high-speed imaging studies and acoustic measurements.

Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound (2021)
Journal Article
Zhang, Z., Wang, C., Koe, B., Schlepütz, C. M., Irvine, S., & Mi, J. (2021). Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound. Acta Materialia, 209, Article 116796. https://doi.org/10.1016/j.actamat.2021.116796

High speed synchrotron X-ray imaging and ultrafast tomography were used to study in situ and in real time the fragmentation and growth dynamics of dendritic microstructures of an Al-15%Cu alloy in solidification under ultrasound. An ultrasound of 30... Read More about Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound.

3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography (2021)
Journal Article
Wang, S., Guo, Z., Kang, J., Zou, M., Li, X., Zhang, A., Du, W., Zhang, W., Lee, T. L., Xiong, S., & Mi, J. (2021). 3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography. Materials, 14(3), Article 520. https://doi.org/10.3390/ma14030520

© 2021 by the authors. Licensee MDPI, Basel, Switzerland. In this paper, the dynamics of multi-dendrite concurrent growth and coarsening of an Al-15 wt.% Cu alloy was studied using a highly computationally efficient 3D phase field model and real-time... Read More about 3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography.

Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography (2020)
Journal Article
Zhang, Z., Khong, J. C., Koe, B., Luo, S., Huang, S., Qin, L., Cipiccia, S., Batey, D., Bodey, A. J., Rau, C., Chiu, Y. L., Zhang, Z., Gebelin, J. C., Green, N., & Mi, J. (2021). Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography. Scripta materialia, 193, 71-76. https://doi.org/10.1016/j.scriptamat.2020.10.032

Synchrotron X-ray microtomography and ptychography were used to characterize the 3D network structure, morphology and distribution of metal carbides in an as-cast IN713LC Ni superalloy. MC typed carbides were found to distribute mainly on the grain b... Read More about Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography.

In-situ multiscale shear failure of a bistable composite tape-spring (2020)
Journal Article
Wang, B., Seffen, K. A., Guest, S. D., Lee, T. L., Huang, S., Luo, S., & Mi, J. (2020). In-situ multiscale shear failure of a bistable composite tape-spring. Composites Science and Technology, 200, Article 108348. https://doi.org/10.1016/j.compscitech.2020.108348

A bistable composite tape-spring (CTS) is stable in both the extended and coiled configurations, with fibres oriented at ±45°. It is light weight and multifunctional, and has attracted growing interest in shape-adaptive and energy harvesting systems... Read More about In-situ multiscale shear failure of a bistable composite tape-spring.

Ultrasonic exfoliation of graphene in water: A key parameter study (2020)
Journal Article
Tyurnina, A. V., Tzanakis, I., Morton, J., Mi, J., Porfyrakis, K., Maciejewska, B., Grobert, N., & Eskin, D. G. (2020). Ultrasonic exfoliation of graphene in water: A key parameter study. Carbon, 168, 737-747. https://doi.org/10.1016/j.carbon.2020.06.029

Liquid Phase Exfoliation (LPE) is an efficient method for graphene flake exfoliation and considered to be compatible with industrial production requirements. However, most of available LPE methods require the use of harmful and expensive solvents for... Read More about Ultrasonic exfoliation of graphene in water: A key parameter study.

Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review (2020)
Journal Article
Wang, B., Zhong, S., Lee, T. L., Fancey, K., & Mi, J. (2020). Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review. Advances in Mechanical Engineering, 12(4), 1-28. https://doi.org/10.1177/1687814020913761

Composite materials/structures are advancing in product efficiency, cost-effectiveness and the development of superior specific properties. There are increasing demands in their applications to load-carrying structures in aerospace, wind turbines, tr... Read More about Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review.

A novel electromagnetic apparatus for in-situ synchrotron X-ray imaging study of the separation of phases in metal solidification (2020)
Journal Article
Koe, B., Abraham, C., Bailey, C., Greening, B., Small, M., Connolley, T., & Mi, J. (2020). A novel electromagnetic apparatus for in-situ synchrotron X-ray imaging study of the separation of phases in metal solidification. HardwareX, 7, Article e00104. https://doi.org/10.1016/j.ohx.2020.e00104

As a part of a research into new techniques for purifying recycled aluminium alloys, a novel electromagnetic apparatus had been developed for investigating in real-time the separation mechanisms of detrimental inclusions in aluminium alloy melts unde... Read More about A novel electromagnetic apparatus for in-situ synchrotron X-ray imaging study of the separation of phases in metal solidification.

Characterization of ultrasonic bubble clouds in a liquid metal by synchrotron X-ray high speed imaging and statistical analysis (2019)
Journal Article
Wang, C., Connolley, T., Tzanakis, I., Eskin, D., & Mi, J. (2020). Characterization of ultrasonic bubble clouds in a liquid metal by synchrotron X-ray high speed imaging and statistical analysis. Materials, 13(1), Article 44. https://doi.org/10.3390/ma13010044

Quantitative understanding of the interactions of ultrasonic waves with liquid and solidifying metals is essential for developing optimal processing strategies for ultrasound processing of metal alloys in the solidification processes. In this researc... Read More about Characterization of ultrasonic bubble clouds in a liquid metal by synchrotron X-ray high speed imaging and statistical analysis.

Understanding the Highly Dynamic Phenomena in Ultrasonic Melt Processing by Ultrafast Synchrotron X-ray Imaging (2019)
Book Chapter
Mi, J., Eskin, D., Connolley, T., & Fezzaa, K. (2019). Understanding the Highly Dynamic Phenomena in Ultrasonic Melt Processing by Ultrafast Synchrotron X-ray Imaging. In C. Chesonis (Ed.), Light Metals 2019 (1539-1544). Springer. https://doi.org/10.1007/978-3-030-05864-7_194

In this paper, we present some highlighted findings from our recent research on real-time and in situ studies of the fundamentals of ultrasonic melt processing, including (1) ultrasonic bubble implosion, oscillation in liquid and semi-liquid (semi-so... Read More about Understanding the Highly Dynamic Phenomena in Ultrasonic Melt Processing by Ultrafast Synchrotron X-ray Imaging.

Synchrotron X-ray real-time studies of the nucleation and growth of intermetallic phases in solidification (2019)
Book Chapter
Mi, J. (2019). Synchrotron X-ray real-time studies of the nucleation and growth of intermetallic phases in solidification. In M. Tiryakioğlu, W. Griffiths, & M. Jolly (Eds.), Shape Casting : 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday (65-71). Springer. https://doi.org/10.1007/978-3-030-06034-3_6

In this paper, real-time, direct observation of the nucleation of primary Al 2 Cu phases on entrained oxide films during the solidification of an Al-35%Cu alloy, and the change of growth mode from planner to dendritic type structure of Al 3 Ni phases... Read More about Synchrotron X-ray real-time studies of the nucleation and growth of intermetallic phases in solidification.

Solidification Processing of Metallic Alloys Under External Fields (2018)
Book
Eskin, D. G., & Mi, J. (Eds.). (2018). Solidification Processing of Metallic Alloys Under External Fields. Cham: Springer. https://doi.org/10.1007/978-3-319-94842-3

Fundamental studies of ultrasonic melt processing (2018)
Journal Article
Eskin, D. G., Tzanakis, I., Wang, F., Lebon, G. S., Subroto, T., Pericleous, K., & Mi, J. (2019). Fundamental studies of ultrasonic melt processing. Ultrasonics Sonochemistry, 52, 455-467. https://doi.org/10.1016/j.ultsonch.2018.12.028

Ultrasonic (cavitation) melt processing attracts considerable interest from both academic and industrial communities as a promising route to provide clean, environment friendly and energy efficient solutions for some of the core issues of the metal c... Read More about Fundamental studies of ultrasonic melt processing.

In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields (2018)
Journal Article
Wang, S., Kang, J., Guo, Z., Lee, T. L., Zhang, X., Wang, Q., Deng, C., & Mi, J. (2019). In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields. Acta Materialia, 165, 388-397. https://doi.org/10.1016/j.actamat.2018.11.053

The fatigue fragmentation of dendritic structures of a SCN-5wt.% Camphor transparent alloy in an ultrasound field was investigated systematically using high-speed imaging. Dynamic interactions between oscillating ultrasonic bubbles and the primary an... Read More about In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields.

In Situ Studies of the Solidification Dynamics of Metal Alloys (2018)
Book Chapter
Mi, J. (2018). In Situ Studies of the Solidification Dynamics of Metal Alloys. In D. G. Eskin, & J. Mi (Eds.), Solidification Processing of Metallic Alloys Under External Fields (19-74). Springer. https://doi.org/10.1007/978-3-319-94842-3_2

© 2018, Springer Nature Switzerland AG. Since the 1990s, tens of 3rd generation synchrotron X-ray facilities have been built around the world and made available for research in almost all scientific disciplines. The high brilliance, high coherence an... Read More about In Situ Studies of the Solidification Dynamics of Metal Alloys.

Pulse External Fields Processing of Metal Alloys (2018)
Book Chapter
Mi, J. (2018). Pulse External Fields Processing of Metal Alloys. In D. G. Eskin, & J. Mi (Eds.), Solidification Processing of Metallic Alloys Under External Fields (243-275). Springer. https://doi.org/10.1007/978-3-319-94842-3_7

© 2018, Springer Nature Switzerland AG. Research and applications of electromagnetic processing of materials began in the 1930s. In those early days, electromagnetic induction was the main technique and it was used for heating or melting metal alloys... Read More about Pulse External Fields Processing of Metal Alloys.

CO2 capture using mesocellular siliceous foam (MCF)-supported CaO (2018)
Journal Article
Gao, F., Huang, J., Sun, H., Hu, J., Wang, M., Mi, J., & Wu, C. (2019). CO2 capture using mesocellular siliceous foam (MCF)-supported CaO. Journal of the Energy Institute, 92(5), 1591-1598. https://doi.org/10.1016/j.joei.2018.07.015

CaO is a promising material as an alternative CO2 capture material which can be used at high temperature. However, CaO sinters to form large particles under long-term high temperature conditions, resulting in a rapid decrease of its surface area and... Read More about CO2 capture using mesocellular siliceous foam (MCF)-supported CaO.