Skip to main content

Research Repository

Advanced Search

Outputs (147)

Hypnosis regulation in propofol anaesthesia employing super-twisting sliding mode control to compensate variability dynamics (2020)
Journal Article
Ilyas, M., Iqbal, J., Ahmad, S., Uppal, A. A., Imtiaz, W. A., & Riaz, R. A. (2020). Hypnosis regulation in propofol anaesthesia employing super-twisting sliding mode control to compensate variability dynamics. IET Systems Biology, 14(2), 59-67. https://doi.org/10.1049/iet-syb.2018.5080

Regulation of hypnosis level on bi-spectral index monitor (BIS) during a surgical procedure in propofol anaesthesia administration is a challenging task for an anaesthesiologist in multi-tasking environment of the operation theater. Automation in ana... Read More about Hypnosis regulation in propofol anaesthesia employing super-twisting sliding mode control to compensate variability dynamics.

Robust Integral Sliding Mode Control Design for Stability Enhancement of Under-actuated Quadcopter (2020)
Journal Article
Ullah, S., Mehmood, A., Khan, Q., Rehman, S., & Iqbal, J. (2020). Robust Integral Sliding Mode Control Design for Stability Enhancement of Under-actuated Quadcopter. International journal of control, automation and systems, 18(7), 1671-1678. https://doi.org/10.1007/s12555-019-0302-3

In this paper, a robust backstepping integral sliding mode control (RBISMC) technique is designed for the flight control of a quadcopter, which is an under-actuated nonlinear system. First, the mathematical model of this highly coupled and under-actu... Read More about Robust Integral Sliding Mode Control Design for Stability Enhancement of Under-actuated Quadcopter.

Estimation of Surgical Needle Insertion Force Using Kalman Filter (2020)
Journal Article
Jafri, S. R. U. N., Jamshaid, A., Jafri, S. M. U. N., & Iqbal, J. (2020). Estimation of Surgical Needle Insertion Force Using Kalman Filter. Journal of Electrical Engineering & Technology, 15(2), 899-906. https://doi.org/10.1007/s42835-020-00355-3

This paper presents a novel low-cost technique to measure the insertion force of a surgical needle on a testing surface to check needle strength. A combination of a load cell with a current sensor for a linear DC motor has been used to estimate the i... Read More about Estimation of Surgical Needle Insertion Force Using Kalman Filter.

On the improvement of calibration accuracy of parallel robots - Modeling and optimization (2020)
Journal Article
Bentaleb, T., & Iqbal, J. (2020). On the improvement of calibration accuracy of parallel robots - Modeling and optimization. Journal of Theoretical and Applied Mechanics (Poland), 58(1), 261-272. https://doi.org/10.15632/JTAM-PL/115863

This paper proposes kinematic based calibration methods for Delta parallel robots. The boundary of the robot workspace is computed using a forward kinematic model. Influence of errors in kinematic parameters on the workspace boundaries is investigate... Read More about On the improvement of calibration accuracy of parallel robots - Modeling and optimization.

Rigid 3d registration algorithm for localization of the vertebral centroids in 3d deformity models of adolescent idiopathic scoliosis (2020)
Journal Article
Ćuković, S. M., Taylor, W., Luković, V., Ghionea, I., Baizid, K., Iqbal, J., & Karuppasamy, S. (2020). Rigid 3d registration algorithm for localization of the vertebral centroids in 3d deformity models of adolescent idiopathic scoliosis. Computer-Aided Design and Applications, 17(6), 1313-1325. https://doi.org/10.14733/cadaps.2020.1313-1325

In this paper, we developed a methodology for a non-invasive 3D diagnosis based on a digitized dorsal surface of the patient enabling assessment and monitoring of Adolescent Idiopathic Scoliosis (AIS). We applied a novel 3D registration algorithm, wh... Read More about Rigid 3d registration algorithm for localization of the vertebral centroids in 3d deformity models of adolescent idiopathic scoliosis.

Robust Sliding Mode Control for Flexible Joint Robotic Manipulator via Disturbance Observer (2019)
Journal Article
Alam, W., Ahmad, S., Mehmood, A., & Iqbal, J. (2019). Robust Sliding Mode Control for Flexible Joint Robotic Manipulator via Disturbance Observer. Interdisciplinary Description of Complex Systems, 17(1), 85-97. https://doi.org/10.7906/indecs.17.1.11

In a flexible joint robotic manipulator, parametric variations and external disturbances result in mismatch uncertainties thus posing a great challenge in terms of manipulator’s control. This article investigates non-linear control algorithms for des... Read More about Robust Sliding Mode Control for Flexible Joint Robotic Manipulator via Disturbance Observer.

Robotics Inspired Renewable Energy Developments: Prospective Opportunities and Challenges (2019)
Journal Article
Iqbal, J., Al-Zahrani, A., Alharbi, S. A., & Hashmi, A. (2019). Robotics Inspired Renewable Energy Developments: Prospective Opportunities and Challenges. IEEE Access, 7, 174898-174923. https://doi.org/10.1109/ACCESS.2019.2957013

The domain of Robotics is a good partner of renewable energy and is becoming critical to the sustainability and survival of the energy industry. The multi-disciplinary nature of robots offers precision, repeatability, reliability, productivity and in... Read More about Robotics Inspired Renewable Energy Developments: Prospective Opportunities and Challenges.

Adaptive Backstepping Based Sensor and Actuator Fault Tolerant Control of a Manipulator (2019)
Journal Article
Awan, Z. S., Ali, K., Iqbal, J., & Mehmood, A. (2019). Adaptive Backstepping Based Sensor and Actuator Fault Tolerant Control of a Manipulator. Journal of Electrical Engineering & Technology, 14(6), 2497-2504. https://doi.org/10.1007/s42835-019-00277-9

The purpose of this research is to propose and design fault tolerant control (FTC) scheme for a robotic manipulator, to increase its reliability and performance in the presence of actuator and sensor faults. To achieve the said objectives, a hybrid c... Read More about Adaptive Backstepping Based Sensor and Actuator Fault Tolerant Control of a Manipulator.

Modeling and Robust Control of Twin Rotor MIMO System (2019)
Presentation / Conference Contribution
Shah, S. H., Khan, S. G., Iqbal, J., & Alharthi, M. (2019, October). Modeling and Robust Control of Twin Rotor MIMO System. Presented at 2019 International Conference on Robotics and Automation in Industry (ICRAI)

Recently, unmanned aerial vehicles (UAVs) have witnessed immense popularity in various fields, ranging from surveillance, rescue, and fire fighting to other more sophisticated military and commercial applications. However, due to their highly nonline... Read More about Modeling and Robust Control of Twin Rotor MIMO System.

Modern control laws for an articulated robotic arm: Modeling and simulation (2019)
Journal Article
Iqbal, J. (2019). Modern control laws for an articulated robotic arm: Modeling and simulation. Engineering, Technology and Applied Science Research, 9(2), 4057-4061. https://doi.org/10.48084/etasr.2598

The robotic manipulator has become an integral component of modern industrial automation. The current paper deals with the mathematical modeling and non-linear control of this manipulator. DH-parameters are used to derive kinematic model while the dy... Read More about Modern control laws for an articulated robotic arm: Modeling and simulation.