Outputs (82)

CO2 capture using mesocellular siliceous foam (MCF)-supported CaO (2018)
Journal Article
Gao, F., Huang, J., Sun, H., Hu, J., Wang, M., Mi, J., & Wu, C. (2019). CO2 capture using mesocellular siliceous foam (MCF)-supported CaO. Journal of the Energy Institute, 92(5), 1591-1598. https://doi.org/10.1016/j.joei.2018.07.015

CaO is a promising material as an alternative CO2 capture material which can be used at high temperature. However, CaO sinters to form large particles under long-term high temperature conditions, resulting in a rapid decrease of its surface area and... Read More about CO2 capture using mesocellular siliceous foam (MCF)-supported CaO.

Modelling and neutron diffraction characterization of the interfacial bonding of spray formed dissimilar steels (2018)
Journal Article
Lee, T. L., Mi, J., Ren, S., Zhao, S., Fan, J., Kabra, S., Zhang, S., & Grant, P. S. (2018). Modelling and neutron diffraction characterization of the interfacial bonding of spray formed dissimilar steels. Acta Materialia, 155, 318-330. https://doi.org/10.1016/j.actamat.2018.05.055

The spray forming of thick, dissimilar steel clad tubes with the objective of achieving a high integrity metallurgical bond across the cladding-substrate interface able to withstand residual stresses and subsequent thermo-mechanical processing was in... Read More about Modelling and neutron diffraction characterization of the interfacial bonding of spray formed dissimilar steels.

Data and videos for ultrafast synchrotron X-ray imaging studies of metal solidification under ultrasound (2018)
Journal Article
Wang, B., Tan, D., Lee, T. L., Khong, J. C., Wang, F., Eskin, D., Connolley, T., Fezzaa, K., & Mi, J. (2018). Data and videos for ultrafast synchrotron X-ray imaging studies of metal solidification under ultrasound. Data in Brief, 17, 837-841. https://doi.org/10.1016/j.dib.2018.01.110

The data presented in this article are related to the paper entitled ‘Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound’ [Wang et al., Acta Mater. 144 (2018) 505-515]. This data article pro... Read More about Data and videos for ultrafast synchrotron X-ray imaging studies of metal solidification under ultrasound.

3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation (2018)
Journal Article
Schlepütz, C. M., Zhao, Y., Du, W., Koe, B., Connolley, T., Irvine, S., Allan, P. K., Schlepütz, C. M., Zhang, W., Wang, F., Eskin, D. G., & Mi, J. (2018). 3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation. Scripta materialia, 146, 321-326. https://doi.org/10.1016/j.scriptamat.2017.12.010

© 2017 Elsevier Ltd Synchrotron X-ray microtomography and skeletonisation method were used to study the true 3D network structures and morphologies of the Fe-rich intermetallic phases in recycled Al-5.0%Cu-0.6%Mn alloys with 0.5% and 1.0% Fe. It was... Read More about 3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation.

In-situ synchrotron X-ray radiography observation of primary Al2Cu intermetallic growth on fragments of aluminium oxide film (2017)
Journal Article
Wang, F., Eskin, D., Connolley, T., Wang, C., Koe, B., King, A., Reinhard, C., & Mi, J. (2018). In-situ synchrotron X-ray radiography observation of primary Al2Cu intermetallic growth on fragments of aluminium oxide film. Materials letters, 213, 303-305. https://doi.org/10.1016/j.matlet.2017.11.090

While using synchrotron X-ray radiography for studying ultrasonic melt processing, the growth of the primary Al2Cu intermetallic phase on fragments of aluminium oxide film during solidification of a hypereutectic Al-35% Cu alloy was observed in-situ... Read More about In-situ synchrotron X-ray radiography observation of primary Al2Cu intermetallic growth on fragments of aluminium oxide film.

Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound (2017)
Journal Article
Wang, B., Tan, D., Lee, T. L., Khong, J. C., Wang, F., Eskin, D., Connolley, T., Fezzaa, K., & Mi, J. (2018). Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound. Acta Materialia, 144, 505-515. https://doi.org/10.1016/j.actamat.2017.10.067

Ultrasound processing of metal alloys is an environmental friendly and promising green technology for liquid metal degassing and microstructural refinement. However many fundamental issues in this field are still not fully understood, because of the... Read More about Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound.

A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing (2017)
Journal Article
Wang, F., Eskin, D., Mi, J., Wang, C., Koe, B., King, A., Reinhard, C., & Connolley, T. (2017). A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing. Acta Materialia, 141, 142-153. https://doi.org/10.1016/j.actamat.2017.09.010

Using synchrotron X-ray high speed radiography, the fragmentation and refinement of pre-existing primary Al2Cu intermetallic dendrites induced by ultrasonic melt processing in a hypereutectic Al-35% Cu alloy were studied in-situ and in real time. The... Read More about A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing.

Influence of ultrasonic treatment on formation of primary Al3Zr in Al–0.4Zr alloy (2017)
Journal Article
WANG, F., ESKIN, D., CONNOLLEY, T., & MI, J. W. (2017). Influence of ultrasonic treatment on formation of primary Al3Zr in Al–0.4Zr alloy. Transactions of Nonferrous Metals Society of China, 27(5), 977-985. https://doi.org/10.1016/S1003-6326%2817%2960115-8

© 2017 The Nonferrous Metals Society of China The effect of ultrasonic treatment on the formation of primary Al3Zr was investigated by applying ultrasound to an Al–0.4Zr alloy. Three temperature ranges were selected, i.e., 830 to 790 °C (above liquid... Read More about Influence of ultrasonic treatment on formation of primary Al3Zr in Al–0.4Zr alloy.

In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys (2017)
Journal Article
Wang, F., Tzanakis, I., Eskin, D., Mi, J., & Connolley, T. (2017). In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys. Ultrasonics Sonochemistry, 39, 66-76. https://doi.org/10.1016/j.ultsonch.2017.03.057

The cavitation-induced fragmentation of primary crystals formed in Al alloys were investigated for the first time by high-speed imaging using a novel experimental approach. Three representative primary crystal types, Al3Ti, Si and Al3V with different... Read More about In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys.

On the occurrence of a eutectic-type structure in solidification of Al-Zr alloys (2017)
Journal Article
Wang, F., Eskin, D. G., Khvan, A. V., Starodub, K. F., Lim, J. J., Burke, M. G., Connolley, T., & Mi, J. (2017). On the occurrence of a eutectic-type structure in solidification of Al-Zr alloys. Scripta materialia, 133, 75-78. https://doi.org/10.1016/j.scriptamat.2017.02.027

For the first time, experimental evidence is presented for the occurrence of a eutectic reaction in dilute Al-Zr alloys solidified at cooling rates from 0.5 to 5 K/s. Particles which formed at grain boundaries during solidification were confirmed by... Read More about On the occurrence of a eutectic-type structure in solidification of Al-Zr alloys.