Validation experiments on finite element models of an ostrich (Struthio camelus) cranium

Cuff, Andrew R.; Bright, Jen A.; Rayfield, Emily J.

Abstract

The first finite element (FE) validation of a complete avian cranium was performed on an extant palaeognath, the ostrich (Struthio camelus). Ex-vivo strains were collected from the cranial bone and rhamphotheca. These experimental strains were then compared to convergence tested, specimen-specific finite element (FE) models.
The FE models contained segmented cortical and trabecular bone, sutures and the keratinous rhamphotheca as identified from micro-CT scan data. Each of these individual materials was assigned isotropic material properties either from the literature or from nanoindentation, and the FE models compared to the ex-vivo results. The FE models generally replicate the location of peak strains and reflect the correct mode of deformation in the rostral region. The models are too stiff in regions of experimentally recorded high strain and too elastic in regions of low experimentally recorded
low strain. The mode of deformation in the low strain neurocranial region is not replicated by the FE models, and although the models replicate strain orientations to within 10◦ in some regions, in most regions the correlation is not strong. Cranial sutures, as has previously been found in other taxa, are important for modifying both
strain magnitude and strain patterns across the entire skull, but especially between opposing the sutural junctions. Experimentally, we find that the strains on the surface of the rhamphotheca are much lower than those found on nearby bone. The FE models produce much higher principal strains despite similar strain ratios across the entirety of the rhamphotheca. This study emphasises the importance of attempting to validate FE models, modelling sutures and rhamphothecae in birds, and shows that whilst location of peak strain and patterns of deformation can be modelled, replicating experimental data in digital models of avian crania remains problematic.

Citation

Cuff, A. R., Bright, J. A., & Rayfield, E. J. (2015). Validation experiments on finite element models of an ostrich (Struthio camelus) cranium. PeerJ, 3(10), Article 1294. https://doi.org/10.7717/peerj.1294

• Journal Article Type: Article
• Acceptance Date: Sep 15, 2015
• Online Publication Date: Oct 13, 2015
• Publication Date: Oct 13, 2015
• Deposit Date: Nov 28, 2019
• Publicly Available Date: Dec 4, 2019
• Journal: PeerJ
• Electronic ISSN: 2167-8359
• Publisher: PeerJ
• Peer Reviewed: Peer Reviewed
• Volume: 3
• Issue: 10
• Article Number: 1294
• DOI: https://doi.org/10.7717/peerj.1294
• Keywords: Ostrich; Skull; Validation; Strain; Finite element analysis
• Public URL: https://hull-repository.worktribe.com/output/3267561
• Publisher URL: https://peerj.com/articles/1294.pdf