All Outputs (405)

Part-load performance of direct-firing and co-firing of coal and biomass in a power generation system integrated with a CO2 capture and compression system (2017)
Journal Article
Ali, U., Akram, M., Font-Palma, C., Ingham, D. B., & Pourkashanian, M. (2017). Part-load performance of direct-firing and co-firing of coal and biomass in a power generation system integrated with a CO2 capture and compression system. Fuel, 210, 873-884. https://doi.org/10.1016/j.fuel.2017.09.023

Bioenergy with Carbon Capture and Storage (BECCS) is recognised as a key technology to mitigate CO2 emissions and achieve stringent climate targets due to its potential for negative emissions. However, the cost for its deployment is expected to be hi... Read More about Part-load performance of direct-firing and co-firing of coal and biomass in a power generation system integrated with a CO2 capture and compression system.

A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing (2017)
Journal Article
Wang, F., Eskin, D., Mi, J., Wang, C., Koe, B., King, A., Reinhard, C., & Connolley, T. (2017). A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing. Acta Materialia, 141, 142-153. https://doi.org/10.1016/j.actamat.2017.09.010

Using synchrotron X-ray high speed radiography, the fragmentation and refinement of pre-existing primary Al2Cu intermetallic dendrites induced by ultrasonic melt processing in a hypereutectic Al-35% Cu alloy were studied in-situ and in real time. The... Read More about A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing.

Design of Cognitive Radio Database using Terrain Maps and Validated Propagation Models (2017)
Journal Article
Fanan, A. M., Riley, N., & Mehdawi, M. (2017). Design of Cognitive Radio Database using Terrain Maps and Validated Propagation Models. Advances in science, technology and engineering systems journal, 2(6), 13-19. https://doi.org/10.25046/aj020602

Cognitive Radio (CR) encompasses a number of technologies which enable adaptive self-programing of systems at different levels to provide more effective use of the increasingly congested radio spectrum. CRs have potential to use spectrum allocated to... Read More about Design of Cognitive Radio Database using Terrain Maps and Validated Propagation Models.

Nonlinear Modeling and Verification of a Heaving Point Absorber for Wave Energy Conversion (2017)
Journal Article
Guo, B., Patton, R., Jin, S., Gilbert, J., & Parsons, D. (2017). Nonlinear Modeling and Verification of a Heaving Point Absorber for Wave Energy Conversion. IEEE Transactions on Sustainable Energy, 9(1), 453-461. https://doi.org/10.1109/tste.2017.2741341

Although the heaving Point Absorber (PA) concept is well known in wave energy conversion research, few studies focus on appropriate modelling of non-linear fluid viscous and mechanical friction dynamics. Even though these concepts are known to have n... Read More about Nonlinear Modeling and Verification of a Heaving Point Absorber for Wave Energy Conversion.

Evaluation of a micro gas turbine with post-combustion CO2 capture for exhaust gas recirculation potential with two experimentally validated models (2017)
Presentation / Conference Contribution
Somehsaraei, H. N., Ali, U., Font-Palma, C., Majoumerd, M. M., Akram, M., Pourkashanian, M., & Assadi, M. (2017, June). Evaluation of a micro gas turbine with post-combustion CO2 capture for exhaust gas recirculation potential with two experimentally validated models. Presented at ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA

The growing global energy demand is facing concerns raised by increasing greenhouse gas emissions, predominantly CO2. Despite substantial progress in the field of renewable energy in recent years, quick balancing responses and back-up services are st... Read More about Evaluation of a micro gas turbine with post-combustion CO2 capture for exhaust gas recirculation potential with two experimentally validated models.

Numerical investigation of the energy performance of an Opaque Ventilated Façade system employing a smart modular heat recovery unit and a latent heat thermal energy system (2017)
Journal Article
Diallo, T., Zhao, X., Dugué, A., Bonnamy, P., Miguel, F., Martinez, A., Theodosiou, T., Liu, J.-S., & Brown, N. (2017). Numerical investigation of the energy performance of an Opaque Ventilated Façade system employing a smart modular heat recovery unit and a latent heat thermal energy system. Applied energy, 205, 130-152. https://doi.org/10.1016/j.apenergy.2017.07.042

The building sector is responsible for more than 40% of the EU’s total energy consumption. To reduce the energy consumption in buildings and to achieve the EU’s fossil fuel saving targets for 2020 and beyond 2050, the energy efficient retrofitting st... Read More about Numerical investigation of the energy performance of an Opaque Ventilated Façade system employing a smart modular heat recovery unit and a latent heat thermal energy system.

An evaluation of the scanning electron microscope mirror effect to study viscoelastically prestressed polymeric matrix composites (2017)
Journal Article
Ge, C., Wang, B., & Fancey, K. S. (2017). An evaluation of the scanning electron microscope mirror effect to study viscoelastically prestressed polymeric matrix composites. Materials Today Communications, 12, 79-87. https://doi.org/10.1016/j.mtcomm.2017.07.001

A viscoelastically prestressed polymeric matrix composite (VPPMC) is produced by applying tensile creep to polymeric fibres, the creep load being removed before the fibres are moulded into a resin matrix. Following matrix curing, the viscoelastically... Read More about An evaluation of the scanning electron microscope mirror effect to study viscoelastically prestressed polymeric matrix composites.

Application of a porous media model for the acoustic damping of perforated plate absorbers (2017)
Journal Article
Wang, J., Rubini, P., & Qin, Q. (2017). Application of a porous media model for the acoustic damping of perforated plate absorbers. Applied acoustics. Acoustique appliqué. Angewandte Akustik, 127, 324-335. https://doi.org/10.1016/j.apacoust.2017.07.003

Perforated panel, or plate, absorbers are commonly employed to reduce sound pressure levels across a broad range of applications including the built environment, industrial installations and propulsion devices. The acoustic performance of a perforate... Read More about Application of a porous media model for the acoustic damping of perforated plate absorbers.

Experimental investigation of a super performance dew point air cooler (2017)
Journal Article
Xu, P., Ma, X., Zhao, X., & Fancey, K. (2017). Experimental investigation of a super performance dew point air cooler. Applied energy, 203, 761-777. https://doi.org/10.1016/j.apenergy.2017.06.095

This paper presents an experimental investigation of a super performance dew point air cooler which, by employing a super performance wet material layer, innovative heat and mass exchanger and intermittent water supply scheme, has achieved a signific... Read More about Experimental investigation of a super performance dew point air cooler.

Developing a multivariate model for predicting the noise annoyance responses due to combined water sound and road traffic noise exposure (2017)
Journal Article
Leung, T. M., Chau, C. K., Tang, S. K., & Xu, J. M. (2017). Developing a multivariate model for predicting the noise annoyance responses due to combined water sound and road traffic noise exposure. Applied acoustics. Acoustique appliqué. Angewandte Akustik, 127, 284-291. https://doi.org/10.1016/j.apacoust.2017.06.020

People in an urban environment are exposed to different types of natural and man-made sounds. Human sound perceptions due to exposure to a single noise source, in particular road traffic and aircraft noises, have been investigated for a long time. Ho... Read More about Developing a multivariate model for predicting the noise annoyance responses due to combined water sound and road traffic noise exposure.

Comparative potential of natural gas, coal and biomass fired power plant with post - combustion CO2 capture and compression (2017)
Journal Article
Ali, U., Font-Palma, C., Akram, M., Agbonghae, E. O., Ingham, D. B., & Pourkashanian, M. (2017). Comparative potential of natural gas, coal and biomass fired power plant with post - combustion CO2 capture and compression. International journal of greenhouse gas control, 63, 184-193. https://doi.org/10.1016/j.ijggc.2017.05.022

© 2017 Elsevier Ltd The application of carbon capture and storage (CCS) and carbon neutral techniques should be adopted to reduce the CO2 emissions from power generation systems. These environmental concerns have renewed interest towards the use of b... Read More about Comparative potential of natural gas, coal and biomass fired power plant with post - combustion CO2 capture and compression.

Influence of ultrasonic treatment on formation of primary Al3Zr in Al–0.4Zr alloy (2017)
Journal Article
WANG, F., ESKIN, D., CONNOLLEY, T., & MI, J. W. (2017). Influence of ultrasonic treatment on formation of primary Al3Zr in Al–0.4Zr alloy. Transactions of Nonferrous Metals Society of China, 27(5), 977-985. https://doi.org/10.1016/S1003-6326%2817%2960115-8

© 2017 The Nonferrous Metals Society of China The effect of ultrasonic treatment on the formation of primary Al3Zr was investigated by applying ultrasound to an Al–0.4Zr alloy. Three temperature ranges were selected, i.e., 830 to 790 °C (above liquid... Read More about Influence of ultrasonic treatment on formation of primary Al3Zr in Al–0.4Zr alloy.

Modelling human skull growth: a validated computational model (2017)
Journal Article
Libby, J., Marghoub, A., Johnson, D., Khonsari, R. H., Fagan, M. J., & Moazen, M. (2017). Modelling human skull growth: a validated computational model. Journal of the Royal Society interface / the Royal Society, 14(130), 20170202. https://doi.org/10.1098/rsif.2017.0202

© 2017 The Author(s) Published by the Royal Society. All rights reserved. During the first year of life, the brain grows rapidly and the neurocranium increases to about 65% of its adult size. Our understanding of the relationship between the biomecha... Read More about Modelling human skull growth: a validated computational model.

Integrated fault-tolerant control for a 3-DOF helicopter with actuator faults and saturation (2017)
Journal Article
Lan, J., Patton, R. J., & Zhu, X. (2017). Integrated fault-tolerant control for a 3-DOF helicopter with actuator faults and saturation. IET Control Theory and Applications, 11(14), 2232-2241. https://doi.org/10.1049/iet-cta.2016.1602

© The Institution of Engineering and Technology 2017. This study proposes a fault estimation (FE)-based fault-tolerant control (FTC) strategy to maintain system reliability and achieve desirable control performance for a 3-DOF helicopter system with... Read More about Integrated fault-tolerant control for a 3-DOF helicopter with actuator faults and saturation.

Computational and Field Test Analysis of Thermal Comfort Performance of User-controlled Thermal Department in an Open Plan Office (2017)
Presentation / Conference Contribution
Shahzad, S., Hughes, B., Calautit, J. K., & Nasir, D. S. Computational and Field Test Analysis of Thermal Comfort Performance of User-controlled Thermal Department in an Open Plan Office

In this study, a thermal Department prototype was developed that allowed personal control over the temperature settings of the back-rest and the seat. Limited research focuses on different methods to provide individual user control over the thermal e... Read More about Computational and Field Test Analysis of Thermal Comfort Performance of User-controlled Thermal Department in an Open Plan Office.

Effect of Urban Street Canyon Aspect Ratio on Thermal Performance of Road Pavement Solar Collectors (RPSC) (2017)
Presentation / Conference Contribution
Nasir, D. S., Hughes, B. R., Calautit, J. K., Aquino, A. I., & Shahzad, S. Effect of Urban Street Canyon Aspect Ratio on Thermal Performance of Road Pavement Solar Collectors (RPSC)

Studies on RPSC (road pavement solar collectors) have shown the potential of reducing the urban heat island effect by dissipating the heat from the pavement for energy harness. In our previous work, performance analysis of RPSC system was carried out... Read More about Effect of Urban Street Canyon Aspect Ratio on Thermal Performance of Road Pavement Solar Collectors (RPSC).

Thermal Comfort and Indoor air Quality Analysis of a Low-energy Cooling Windcatcher (2017)
Presentation / Conference Contribution
Calautit, J. K., Aquino, A. I., Shahzad, S., Nasir, D. S., & Hughes, B. R. Thermal Comfort and Indoor air Quality Analysis of a Low-energy Cooling Windcatcher

The aim of this work was to investigate the performance of a roof-mounted cooling windcatcher integrated with heat pipes using Computational Fluid Dynamics (CFD) and field test analysis. The windcatcher model was incorporated to a 5m x 5m x3 m test r... Read More about Thermal Comfort and Indoor air Quality Analysis of a Low-energy Cooling Windcatcher.

Characterization of rice husk-based catalyst prepared via conventional and microwave carbonisation (2017)
Journal Article
Touhami, D., Zhu, Z., Balan, W. S., Janaun, J., Haywood, S., & Zein, S. (2017). Characterization of rice husk-based catalyst prepared via conventional and microwave carbonisation. Journal of Environmental Chemical Engineering, 5(3), 2388-2394. https://doi.org/10.1016/j.jece.2017.04.020

© 2017 Elsevier Ltd. Carbon-based sulphonated catalysts (CBSCs) were made from rice husk for biodiesel production. The CBSCs were prepared by microwave (MW) and conventional heating processes from the same feedstock. In both heating systems, the prep... Read More about Characterization of rice husk-based catalyst prepared via conventional and microwave carbonisation.

Development of a smart modular heat recovery unit adaptable into a ventilated façade (2017)
Journal Article
Martinez, A., Urra, I., Hernandez, J., Diallo, T., & Zhao, X. (2017). Development of a smart modular heat recovery unit adaptable into a ventilated façade. Procedia Environmental Sciences, 38, 94-101. https://doi.org/10.1016/j.proenv.2017.03.086

This paper presents the designing aspects and first experimental characterization of an adaptable Smart Modular Heat Recovery Unit (SMHRU) developed under the scope of the E2VENT Project. This SMHRU will be designed for being installed in existing bu... Read More about Development of a smart modular heat recovery unit adaptable into a ventilated façade.

In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys (2017)
Journal Article
Wang, F., Tzanakis, I., Eskin, D., Mi, J., & Connolley, T. (2017). In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys. Ultrasonics Sonochemistry, 39, 66-76. https://doi.org/10.1016/j.ultsonch.2017.03.057

The cavitation-induced fragmentation of primary crystals formed in Al alloys were investigated for the first time by high-speed imaging using a novel experimental approach. Three representative primary crystal types, Al3Ti, Si and Al3V with different... Read More about In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys.