Skip to main content

Research Repository

Advanced Search

All Outputs (332)

An investigation into the long-term viscoelastic recovery of Nylon 6,6 fibres through accelerated ageing (2006)
Journal Article
Pang, J. W. C., & Fancey, K. S. (2006). An investigation into the long-term viscoelastic recovery of Nylon 6,6 fibres through accelerated ageing. Materials Science and Engineering: A, 431(1-2), 100-105. https://doi.org/10.1016/j.msea.2006.05.052

As part of investigations into the development of viscoelastically prestressed polymeric matrix composites, time-temperature superposition principles have been adopted to evaluate the long-term viscoelastic strain recovery characteristics of nylon 6,... Read More about An investigation into the long-term viscoelastic recovery of Nylon 6,6 fibres through accelerated ageing.

Three dimensional stereolithography models of cancellous bone structures from μCT data: Testing and validation of finite element results (2006)
Journal Article
Dobson, C. A., Sisias, G., Phillips, R., Langton, C. M., & Fagan, M. J. (2006). Three dimensional stereolithography models of cancellous bone structures from μCT data: Testing and validation of finite element results. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220(3), 481-484. https://doi.org/10.1243/09544119H00405

Stereolithography (STL) models of complex cancellous bone structures have been produced from three-dimensional micro-computed tomography data sets of human cancellous bone histological samples from four skeletal sites. The STL models have been mechan... Read More about Three dimensional stereolithography models of cancellous bone structures from μCT data: Testing and validation of finite element results.

A mechanical model for creep, recovery and stress relaxation in polymeric materials (2005)
Journal Article
Fancey, K. S. (2005). A mechanical model for creep, recovery and stress relaxation in polymeric materials. Journal of materials science, 40(18), 4827-4831. https://doi.org/10.1007/s10853-005-2020-x

A mechanical model is presented, in which viscoelastic response is described by the action of time-dependent latch elements. The model represents viscoelastic changes occurring through incremental jumps as opposed to continuous motion. This is suppor... Read More about A mechanical model for creep, recovery and stress relaxation in polymeric materials.

Stereo visualization of 3D trabecular bone structures produced by bone remodelling simulation (2003)
Journal Article
Phillips, R., Grunchec, J. A., Ward, J. W., Fagan, M. J., Dobson, C. A., Langton, C. M., & Sisias, G. (2003). Stereo visualization of 3D trabecular bone structures produced by bone remodelling simulation. Studies in health technology and informatics, 94, 258-264. https://doi.org/10.3233/978-1-60750-938-7-258

Adult human bone is constantly being renewed by a process known as remodelling. For cancellous bone this renewal process occurs at the interface between bone and marrow where bone is depleted by osteoclasts and rebuilt by osteoblasts. This remodellin... Read More about Stereo visualization of 3D trabecular bone structures produced by bone remodelling simulation.

Algorithms for accurate rapid prototyping replication of cancellous bone voxel maps (2002)
Journal Article
Sisias, G., Phillips, R., Dobson, C., Fagan, M., & Langton, C. (2002). Algorithms for accurate rapid prototyping replication of cancellous bone voxel maps. Rapid Prototyping Journal, 8(1), 6-24. https://doi.org/10.1108/13552540210413266

A set of algorithms has been developed and evaluated for 3D and 21/2D rapid prototyping replication of 3D reconstructions of cancellous bone samples. The algorithms replicate a voxel map without any loss of fidelity, so as to increase the validity of... Read More about Algorithms for accurate rapid prototyping replication of cancellous bone voxel maps.

Smoothing of pixelated finite element models of cancellous bone structures and the effect on the predicted structural properties of the bone (2002)
Journal Article
Dobson, C. A., Sisias, G., Phillips, R., Langton, C. M., & Fagan, M. J. (2002). Smoothing of pixelated finite element models of cancellous bone structures and the effect on the predicted structural properties of the bone. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 216(2), 145-149. https://doi.org/10.1243/0954411021536360

Many areas of biomedical engineering involve the modelling of biological systems, often using data from medical scanning techniques such as computed microtomography (μCT), and the prediction of the mechanical properties of these systems via finite el... Read More about Smoothing of pixelated finite element models of cancellous bone structures and the effect on the predicted structural properties of the bone.

The intelligent technology of CMM (2001)
Journal Article
Zhao, Y., Li, Z., Zhang, G., Liu, S., Wang, J., & Ma, X. (2001). The intelligent technology of CMM. Ji liang xue bao = Acta metrologica Sinica, 22(3), 164-167. https://doi.org/10.3321/j.issn%3A1000-1158.2001.03.002

The key technologies of intelligent CMM, including extracting the measuring information of a part from its CAD files, deciding measuring strategies, making algorithms of object-oriented error compensation, accuracy optimization, and collision-free me... Read More about The intelligent technology of CMM.

Stochastically simulated assessment of anabolic treatment following varying degrees of cancellous bone resorption (2000)
Journal Article
Langton, C., Haire, T., Ganney, P., Dobson, C., Fagan, M., Sisias, G., & Phillips, R. (2000). Stochastically simulated assessment of anabolic treatment following varying degrees of cancellous bone resorption. Bone, 27(1), 111-118. https://doi.org/10.1016/s8756-3282%2800%2900290-8

The aim of this study was to investigate the recovery in cancellous bone stiffness resulting from anabolic treatment following varying degrees of resorption, using a stochastic simulation applied to a simplistic structure consisting of five vertical... Read More about Stochastically simulated assessment of anabolic treatment following varying degrees of cancellous bone resorption.

Numerical computation and analysis of the Titchmarsh-Weyl mα(λ)  function for some simple potentials (1999)
Journal Article
Witwit, M. R. M., Gordon, N. A., & Killingbeck, J. (1999). Numerical computation and analysis of the Titchmarsh-Weyl mα(λ)  function for some simple potentials. Journal of Computational and Applied Mathematics, 106(1), 131-143. https://doi.org/10.1016/S0377-0427%2899%2900061-8

This article is concerned with the Titchmarsh-Weyl mα(λ) function for the differential equation d2y/dx2+[-q(x)]y=0. The test potential q(x)=x2, for which the relevant mα(λ) functions are meromorphic, having simple poles at the points =4k+1 and =4k+3,... Read More about Numerical computation and analysis of the Titchmarsh-Weyl mα(λ)  function for some simple potentials.

Output feedback sliding mode FTC for a class of nonlinear inter-connected systems
Presentation / Conference
Patton, R. J., & Huang, Z. Output feedback sliding mode FTC for a class of nonlinear inter-connected systems. Paper presented at IFAC-PapersOnLine

This paper is concerned with the challenge of developing a fault-tolerant control (FTC) scheme for an inter-connected decentralised system in which the individual subsystems are linear but the inter-connections are non-linear functions of the subsyst... Read More about Output feedback sliding mode FTC for a class of nonlinear inter-connected systems.