Outputs (434)

A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant (2020)
Journal Article
Michailos, S., Walker, M., Moody, A., Poggio, D., & Pourkashanian, M. (2021). A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant. Journal of Environmental Chemical Engineering, 9(1), Article 104735. https://doi.org/10.1016/j.jece.2020.104735

The aim of the present study is to assess the techno-economic viability of integrating biomethanation into power to gas systems in a real waste water treatment plant (WWTP). The research is the first attempt to assess the viability of several scenari... Read More about A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant.

A techno-enviro-economic assessment of a biomass fuelled micro-CCHP driven by a hybrid Stirling and ORC engine (2020)
Journal Article
Udeh, G. T., Michailos, S., Ingham, D., Hughes, K. J., Ma, L., & Pourkashanian, M. (2021). A techno-enviro-economic assessment of a biomass fuelled micro-CCHP driven by a hybrid Stirling and ORC engine. Energy Conversion and Management, 227, Article 113601. https://doi.org/10.1016/j.enconman.2020.113601

Stirling engines (SE) offer good part load performance and high heat sink temperatures which make it a suitable candidate to serve as a prime mover in micro-combined cooling, heating and power (μ-CCHP) applications. In this study, a novel μ-CCHP conf... Read More about A techno-enviro-economic assessment of a biomass fuelled micro-CCHP driven by a hybrid Stirling and ORC engine.

Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography (2020)
Journal Article
Zhang, Z., Khong, J. C., Koe, B., Luo, S., Huang, S., Qin, L., …Mi, J. (2021). Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography. Scripta materialia, 193, 71-76. https://doi.org/10.1016/j.scriptamat.2020.10.032

Synchrotron X-ray microtomography and ptychography were used to characterize the 3D network structure, morphology and distribution of metal carbides in an as-cast IN713LC Ni superalloy. MC typed carbides were found to distribute mainly on the grain b... Read More about Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography.

Inorganic fouling of heat transfer surface from potable water during convective heat transfer (2020)
Journal Article
Al-Gailani, A., Sanni, O., Charpentier, T. V., Crisp, R., Bruins, J. H., & Neville, A. (2021). Inorganic fouling of heat transfer surface from potable water during convective heat transfer. Applied thermal engineering, 184, Article 116271. https://doi.org/10.1016/j.applthermaleng.2020.116271

In this work, inorganic fouling of the heat transfer surfaces from potable water has been studied using a once-through flow cell to visualize and follow the deposition processes. The effects of surface material and flow rate on the amount and morphol... Read More about Inorganic fouling of heat transfer surface from potable water during convective heat transfer.

Esterification of residual palm oil using solid acid catalyst derived from rice husk (2020)
Journal Article
Semilin, V., Balan, W. S., Janaun, J., Chung, C. H., Zhu, Z., Haywood, S. K., …Zein, S. H. (2021). Esterification of residual palm oil using solid acid catalyst derived from rice husk. Journal of hazardous materials, 404(Part B), Article 124092. https://doi.org/10.1016/j.jhazmat.2020.124092

In this study, carbon-silica based acid catalysts derived from rice husks (RH) were successfully synthesised using microwave (MW) technology. The results showed that MW sulphonation produced Sulphur (S) content of 17.2–18.5 times higher than in raw R... Read More about Esterification of residual palm oil using solid acid catalyst derived from rice husk.

Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber (2020)
Journal Article
Semilin, V., Janaun, J., Chung, C. H., Touhami, D., Haywood, S. K., Chong, K. P., …Zein, S. H. (2021). Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber. Journal of hazardous materials, 404, Article 124144. https://doi.org/10.1016/j.jhazmat.2020.124144

Residual palm oil that goes into the river untreated can become detrimental to the environment. Residual oil discharge during milling process into palm oil mill effluent (POME) is unavoidable. About 1 wt% of residual oil in POME causes major problems... Read More about Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber.

Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers (2020)
Journal Article
Shan, L., Yan, J., Wang, Y., Ke, X., Cai, J., Yu, S., …Zhang, X. (2021). Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers. Catalysis Letters, https://doi.org/10.1007/s10562-020-03402-w

© 2020, Springer Science+Business Media, LLC, part of Springer Nature. Acid-catalyzed aqueous-phase hydrolysis of cellulose was investigated over zeolite HY nanocrystals grafted on anantase titania nanofibres (HY-TiO2). H-exchanged NaY zeolite nanocr... Read More about Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers.

Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass (2020)
Journal Article
Egwu, U., Sallis, P., & Oko, E. (2021). Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass. Fuel, 285, Article 119060. https://doi.org/10.1016/j.fuel.2020.119060

Nutrient supplementation could improve the biomethane production of different biomass feedstocks during anaerobic digestion. In this study, the impact of nutrient supplementation on the anaerobic digestion of the West African Gamba and Guinea Grass f... Read More about Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass.

Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study (2020)
Journal Article
Carcadea, E., Ismail, M. S., Ingham, D. B., Patularu, L., Schitea, D., Marinoiu, A., …Varlam, M. (2021). Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study. International Journal of Hydrogen Energy, 46(25), 13572-13582. https://doi.org/10.1016/j.ijhydene.2020.08.150

Various flow field designs have been numerically investigated to evaluate the effect of pattern and the cross-sectional dimensions of the channel on the performance of a large active area PEM fuel cell. Three types of multiple-serpentine channels (7-... Read More about Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study.

Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing (2020)
Journal Article
Ward, H. J., Ward, H. J., Armstrong-Telfer, T. A., Armstrong-Telfer, T. A., Kelly, S. M., Kelly, S. M., …Wadhawan, J. D. (2020). Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing. Journal of Electroanalytical Chemistry, 872, Article 114328. https://doi.org/10.1016/j.jelechem.2020.114328

In any manufacturing environment, it is always important to be able to embrace a culture of traceability of any non-conformed product. For the case of ink manufacture, operator confusion, leading to the mixing-up of solvents, or connecting the incorr... Read More about Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing.