A techno-enviro-economic assessment of a biomass fuelled micro-CCHP driven by a hybrid Stirling and ORC engine

Udeh, Godfrey T.; Michailos, Stavros; Ingham, Derek; Hughes, Kevin J.; Ma, Lin; Pourkashanian, Mohamed

Abstract

Stirling engines (SE) offer good part load performance and high heat sink temperatures which make it a suitable candidate to serve as a prime mover in micro-combined cooling, heating and power (μ-CCHP) applications. In this study, a novel μ-CCHP configuration hybridising a SE prime mover with an ORC to utilise the waste heat from the SE to produce additional power is proposed. Additional waste heat was recovered from the flue gas to dry the biomass feedstock, fire a thermal chiller and produce hot water. Further, a non-ideal thermal model was formulated and implemented in MATLAB to model the SE prime mover while the models of the other subsystems were implemented in Aspen plus®. Also, the control of the subsystems of the μ-CCHP was achieved in MATLAB by establishing a connection between the software and Aspen plus®. A detailed sensitivity analysis was conducted to study the influence of cooling and heating loads, rotational speed of the prime mover and quality of the biomass fuel on the energy utilisation factor, primary energy savings (PES), CO2 emissions reduction (CO2ER) and exergy efficiency of the μ-CCHP system. It was found that hybridising SE and ORC increased the power output and thermal efficiency of the standalone SE by 66% and 63.4%, respectively at its operating speed of 2500 rpm, and also improved the performance at high rotational speeds. Further, the deployment of hybrid prime movers in the design of the μ-CCHP yielded high PES and CO2ER of 55% and 43%, respectively when the system utilised woodchips fuel containing 10% moisture. The proposed energy system performs better than conventional energy systems producing only one energy vector over a wide range of engine frequencies, cooling ratios and woodchips compositions.

Citation

Udeh, G. T., Michailos, S., Ingham, D., Hughes, K. J., Ma, L., & Pourkashanian, M. (2021). A techno-enviro-economic assessment of a biomass fuelled micro-CCHP driven by a hybrid Stirling and ORC engine. Energy Conversion and Management, 227, Article 113601. https://doi.org/10.1016/j.enconman.2020.113601

• Journal Article Type: Article
• Acceptance Date: Oct 24, 2020
• Online Publication Date: Nov 5, 2020
• Publication Date: Jan 1, 2021
• Deposit Date: Dec 5, 2022
• Journal: Energy Conversion and Management
• Print ISSN: 0196-8904
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 227
• Article Number: 113601
• DOI: https://doi.org/10.1016/j.enconman.2020.113601
• Keywords: Poly-generation; Micro-CCHP; Stirling engine; Waste heat recovery; Biomass drying; Conceptual dynamic design
• Public URL: https://hull-repository.worktribe.com/output/4130935
• Related Public URLs: https://eprints.whiterose.ac.uk/168467/