Outputs (51)

Inorganic fouling of heat transfer surface from potable water during convective heat transfer (2020)
Journal Article
Al-Gailani, A., Sanni, O., Charpentier, T. V., Crisp, R., Bruins, J. H., & Neville, A. (2021). Inorganic fouling of heat transfer surface from potable water during convective heat transfer. Applied thermal engineering, 184, Article 116271. https://doi.org/10.1016/j.applthermaleng.2020.116271

In this work, inorganic fouling of the heat transfer surfaces from potable water has been studied using a once-through flow cell to visualize and follow the deposition processes. The effects of surface material and flow rate on the amount and morphol... Read More about Inorganic fouling of heat transfer surface from potable water during convective heat transfer.

Esterification of residual palm oil using solid acid catalyst derived from rice husk (2020)
Journal Article
Semilin, V., Balan, W. S., Janaun, J., Chung, C. H., Zhu, Z., Haywood, S. K., Touhami, D., Chong, K. P., Yaser, A. Z., Lee, P. C., & Zein, S. H. (2021). Esterification of residual palm oil using solid acid catalyst derived from rice husk. Journal of hazardous materials, 404(Part B), Article 124092. https://doi.org/10.1016/j.jhazmat.2020.124092

In this study, carbon-silica based acid catalysts derived from rice husks (RH) were successfully synthesised using microwave (MW) technology. The results showed that MW sulphonation produced Sulphur (S) content of 17.2–18.5 times higher than in raw R... Read More about Esterification of residual palm oil using solid acid catalyst derived from rice husk.

Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber (2020)
Journal Article
Semilin, V., Janaun, J., Chung, C. H., Touhami, D., Haywood, S. K., Chong, K. P., Yaser, A. Z., & Zein, S. H. (2021). Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber. Journal of hazardous materials, 404, Article 124144. https://doi.org/10.1016/j.jhazmat.2020.124144

Residual palm oil that goes into the river untreated can become detrimental to the environment. Residual oil discharge during milling process into palm oil mill effluent (POME) is unavoidable. About 1 wt% of residual oil in POME causes major problems... Read More about Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber.

Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers (2020)
Journal Article
Shan, L., Yan, J., Wang, Y., Ke, X., Cai, J., Yu, S., Lee, A. F., Gu, X., & Zhang, X. (2021). Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers. Catalysis Letters, https://doi.org/10.1007/s10562-020-03402-w

© 2020, Springer Science+Business Media, LLC, part of Springer Nature. Acid-catalyzed aqueous-phase hydrolysis of cellulose was investigated over zeolite HY nanocrystals grafted on anantase titania nanofibres (HY-TiO2). H-exchanged NaY zeolite nanocr... Read More about Aqueous-Phase Cellulose Hydrolysis over Zeolite HY Nanocrystals Grafted on Anatase Titania Nanofibers.

Nonlinear model predictive control (NMPC) of the solvent-based post-combustion CO2 capture process (2020)
Journal Article
Akinola, T. E., Oko, E., Wu, X., Ma, K., & Wang, M. (2020). Nonlinear model predictive control (NMPC) of the solvent-based post-combustion CO2 capture process. Energy, 213, Article 118840. https://doi.org/10.1016/j.energy.2020.118840

The flexible operation capability of solvent-based post-combustion capture (PCC) process is vital to efficiently meet the load variation requirement in the integrated upstream power plant. This can be achieved through the deployment of an appropriate... Read More about Nonlinear model predictive control (NMPC) of the solvent-based post-combustion CO2 capture process.

Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass (2020)
Journal Article
Egwu, U., Sallis, P., & Oko, E. (2021). Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass. Fuel, 285, Article 119060. https://doi.org/10.1016/j.fuel.2020.119060

Nutrient supplementation could improve the biomethane production of different biomass feedstocks during anaerobic digestion. In this study, the impact of nutrient supplementation on the anaerobic digestion of the West African Gamba and Guinea Grass f... Read More about Study of the impacts of supplements on the specific methane production during anaerobic digestion of the West African Gamba and Guinea Grass.

Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study (2020)
Journal Article
Carcadea, E., Ismail, M. S., Ingham, D. B., Patularu, L., Schitea, D., Marinoiu, A., Ion-Ebrasu, D., Mocanu, D., & Varlam, M. (2021). Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study. International Journal of Hydrogen Energy, 46(25), 13572-13582. https://doi.org/10.1016/j.ijhydene.2020.08.150

Various flow field designs have been numerically investigated to evaluate the effect of pattern and the cross-sectional dimensions of the channel on the performance of a large active area PEM fuel cell. Three types of multiple-serpentine channels (7-... Read More about Effects of geometrical dimensions of flow channels of a large-active-area PEM fuel cell: A CFD study.

Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing (2020)
Journal Article
Ward, H. J., Ward, H. J., Armstrong-Telfer, T. A., Armstrong-Telfer, T. A., Kelly, S. M., Kelly, S. M., Lawrence, N. S., Lawrence, N. S., Wadhawan, J., & Wadhawan, J. D. (2020). Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing. Journal of Electroanalytical Chemistry, 872, Article 114328. https://doi.org/10.1016/j.jelechem.2020.114328

In any manufacturing environment, it is always important to be able to embrace a culture of traceability of any non-conformed product. For the case of ink manufacture, operator confusion, leading to the mixing-up of solvents, or connecting the incorr... Read More about Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing.

In-situ multiscale shear failure of a bistable composite tape-spring (2020)
Journal Article
Wang, B., Seffen, K. A., Guest, S. D., Lee, T. L., Huang, S., Luo, S., & Mi, J. (2020). In-situ multiscale shear failure of a bistable composite tape-spring. Composites Science and Technology, 200, Article 108348. https://doi.org/10.1016/j.compscitech.2020.108348

A bistable composite tape-spring (CTS) is stable in both the extended and coiled configurations, with fibres oriented at ±45°. It is light weight and multifunctional, and has attracted growing interest in shape-adaptive and energy harvesting systems... Read More about In-situ multiscale shear failure of a bistable composite tape-spring.

Valorization of rice straw for ethylene and jet fuel production: A technoeconomic assessment (2020)
Book Chapter
Michailos, S., & Webb, C. (2020). Valorization of rice straw for ethylene and jet fuel production: A technoeconomic assessment. In M. R. Kosseva, & C. Webb (Eds.), Food Industry Wastes : Assessment and Recuperation of Commodities (201-221). (2nd ed.). Academic Press. https://doi.org/10.1016/B978-0-12-817121-9.00010-3

The goal of the present study is to exemplify ways to valorize lignocellulosic food waste within the biorefinery concept. Rice straw was selected as the feedstock of focus, but the presented methodologies can be extended to other similar materials su... Read More about Valorization of rice straw for ethylene and jet fuel production: A technoeconomic assessment.