Outputs (22)

Getting to the Point: Walking and feeling on the shorelines of Spurn (2024)
Presentation / Conference Contribution
Horkan, T. (2024, March). Getting to the Point: Walking and feeling on the shorelines of Spurn. Paper presented at ACLA 2024 Annual Conference (American Comparative Literature Association), Palais des congrès de Montréal, Montreal, Canada

Spurn is a narrow sandy spit on the Holderness coast of East Yorkshire, UK, which juts out into the mouth of the Humber Estuary, and is a place of rich ecological and historical interest. Because of its position at the boundary of river and sea, Spur... Read More about Getting to the Point: Walking and feeling on the shorelines of Spurn.

3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography (2021)
Journal Article
Wang, S., Guo, Z., Kang, J., Zou, M., Li, X., Zhang, A., Du, W., Zhang, W., Lee, T. L., Xiong, S., & Mi, J. (2021). 3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography. Materials, 14(3), Article 520. https://doi.org/10.3390/ma14030520

© 2021 by the authors. Licensee MDPI, Basel, Switzerland. In this paper, the dynamics of multi-dendrite concurrent growth and coarsening of an Al-15 wt.% Cu alloy was studied using a highly computationally efficient 3D phase field model and real-time... Read More about 3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography.

Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography (2020)
Journal Article
Zhang, Z., Khong, J. C., Koe, B., Luo, S., Huang, S., Qin, L., Cipiccia, S., Batey, D., Bodey, A. J., Rau, C., Chiu, Y. L., Zhang, Z., Gebelin, J. C., Green, N., & Mi, J. (2021). Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography. Scripta materialia, 193, 71-76. https://doi.org/10.1016/j.scriptamat.2020.10.032

Synchrotron X-ray microtomography and ptychography were used to characterize the 3D network structure, morphology and distribution of metal carbides in an as-cast IN713LC Ni superalloy. MC typed carbides were found to distribute mainly on the grain b... Read More about Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography.

In-situ multiscale shear failure of a bistable composite tape-spring (2020)
Journal Article
Wang, B., Seffen, K. A., Guest, S. D., Lee, T. L., Huang, S., Luo, S., & Mi, J. (2020). In-situ multiscale shear failure of a bistable composite tape-spring. Composites Science and Technology, 200, Article 108348. https://doi.org/10.1016/j.compscitech.2020.108348

A bistable composite tape-spring (CTS) is stable in both the extended and coiled configurations, with fibres oriented at ±45°. It is light weight and multifunctional, and has attracted growing interest in shape-adaptive and energy harvesting systems... Read More about In-situ multiscale shear failure of a bistable composite tape-spring.

Interactions between sediment microbial ecology and physical dynamics drive heterogeneity in contextually similar depositional systems (2020)
Journal Article
Hope, J. A., Malarkey, J., Baas, J. H., Peakall, J., Parsons, D. R., Manning, A. J., Bass, S. J., Lichtman, I. D., Thorne, P. D., Ye, L., & Paterson, D. M. (2020). Interactions between sediment microbial ecology and physical dynamics drive heterogeneity in contextually similar depositional systems. Limnology and Oceanography, 65(10), 2403-2419. https://doi.org/10.1002/lno.11461

This study focuses on the interactions between sediment stability and biological and physical variables that influence the erodibility across different habitats. Sampling at short-term temporal scales illustrated the persistence of the microphytobent... Read More about Interactions between sediment microbial ecology and physical dynamics drive heterogeneity in contextually similar depositional systems.

A Hybrid Modular Approach for Dynamic Fault Tree Analysis (2020)
Journal Article
Kabir, S., Aslansefat, K., Sorokos, I., Papadopoulos, Y., & Konur, S. (2020). A Hybrid Modular Approach for Dynamic Fault Tree Analysis. IEEE Access, 8, 97175-97188. https://doi.org/10.1109/ACCESS.2020.2996643

Over the years, several approaches have been developed for the quantitative analysis of dynamic fault trees (DFTs). These approaches have strong theoretical and mathematical foundations; however, they appear to suffer from the state-space explosion a... Read More about A Hybrid Modular Approach for Dynamic Fault Tree Analysis.

Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review (2020)
Journal Article
Wang, B., Zhong, S., Lee, T. L., Fancey, K., & Mi, J. (2020). Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review. Advances in Mechanical Engineering, 12(4), 1-28. https://doi.org/10.1177/1687814020913761

Composite materials/structures are advancing in product efficiency, cost-effectiveness and the development of superior specific properties. There are increasing demands in their applications to load-carrying structures in aerospace, wind turbines, tr... Read More about Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review.

A conceptual framework to incorporate complex basic events in HiP-HOPS (2019)
Book Chapter
Kabir, S., Aslansefat, K., Sorokos, I., Papadopoulos, Y., & Gheraibia, Y. (2019). A conceptual framework to incorporate complex basic events in HiP-HOPS. In Y. Papadopoulos, K. Aslansefat, P. Katsaros, & M. Bozzano (Eds.), Model-Based Safety and Assessment. IMBSA 2019 (109-124). Springer Verlag. https://doi.org/10.1007/978-3-030-32872-6_8

Reliability evaluation for ensuring the uninterrupted system operation is an integral part of dependable system development. Model-based safety analysis (MBSA) techniques such as Hierarchically Performed Hazard Origin and Propagation Studies (HiP-HOP... Read More about A conceptual framework to incorporate complex basic events in HiP-HOPS.

Safety + AI: A novel approach to update safety models using artificial intelligence (2019)
Journal Article
Gheraibia, Y., Kabir, S., Aslansefat, K., Sorokos, I., & Papadopoulos, Y. (2019). Safety + AI: A novel approach to update safety models using artificial intelligence. IEEE Access, 7, 135855-135869. https://doi.org/10.1109/ACCESS.2019.2941566

Safety-critical systems are becoming larger and more complex to obtain a higher level of functionality. Hence, modeling and evaluation of these systems can be a difficult and error-prone task. Among existing safety models, Fault Tree Analysis (FTA) i... Read More about Safety + AI: A novel approach to update safety models using artificial intelligence.

Bedform migration in a mixed sand and cohesive clay intertidal environment and implications for bed material transport predictions (2018)
Journal Article
Lichtman, I. D., Baas, J. H., Amoudry, L. O., Thorne, P. D., Malarkey, J., Hope, J. A., Peakall, J., Paterson, D. M., Bass, S. J., Cooke, R. D., Manning, A. J., Davies, A. G., Parsons, D. R., & Ye, L. (2018). Bedform migration in a mixed sand and cohesive clay intertidal environment and implications for bed material transport predictions. Geomorphology, 315, 17-32. https://doi.org/10.1016/j.geomorph.2018.04.016

Many coastal and estuarine environments are dominated by mixtures of non-cohesive sand and cohesive mud. The migration rate of bedforms, such as ripples and dunes, in these environments is important in determining bed material transport rates to info... Read More about Bedform migration in a mixed sand and cohesive clay intertidal environment and implications for bed material transport predictions.