Skip to main content

Research Repository

Advanced Search

Process analysis of intensified absorber for post-combustion CO₂ capture through modelling and simulation

Joel, Atuman S.; Wang, Meihong; Ramshaw, Colin; Oko, Eni

Authors

Atuman S. Joel

Meihong Wang

Colin Ramshaw

Eni Oko



Abstract

Process intensification (PI) has the potential to significantly reduce capital and operating costs in postcombustion CO₂ capture using monoethanolamine (MEA) solvent for power plants. The intensified absorber using rotating packed bed (RPB) was modelled based on Aspen Plus® rate-based model, but some build-in correlations in Aspen Plus® rate-based model were replaced with new correlations suitable for RPB. These correlations reflect centrifugal acceleration which is present in RPB. The new correlations were implemented in visual FORTRAN as sub-routines and were dynamically linked to Aspen Plus® rate based model. The model for intensified absorber was validated using experimental data and showed good agreement. Process analysis carried out indicates: (a) CO₂ capture level increases with rotating speed. (b) Higher lean MEA inlet temperature leads to higher CO₂ capture level. (c) Increase in lean MEA concentration results in increase in CO₂ capture level. (d) Temperature bulge is not present in intensified absorber. Compared with conventional absorber using packed columns, the insights obtained from this study are (1) intensified absorber using RPB improves mass transfer significantly. (2) Higher flue gas temperature or lean MEA temperature will not be detrimental to the reactive separation as such cooling duty for flue gas can be saved. (3) Inter-cooling cost will not be incurred since there is no temperature bulge. A detail comparison between conventional absorber and intensified absorber using RPB was carried out and absorber volume reduction factor of 12 times was found. These insights can be useful for design and operation of intensified absorber for CO₂ capture.

Citation

Joel, A. S., Wang, M., Ramshaw, C., & Oko, E. (2014). Process analysis of intensified absorber for post-combustion CO₂ capture through modelling and simulation. International journal of greenhouse gas control, 21, 91-100. https://doi.org/10.1016/j.ijggc.2013.12.005

Acceptance Date Dec 2, 2013
Online Publication Date Dec 27, 2013
Publication Date 2014-02
Deposit Date Jun 4, 2015
Publicly Available Date Mar 29, 2024
Journal International journal of greenhouse gas control
Print ISSN 1750-5836
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 21
Pages 91-100
DOI https://doi.org/10.1016/j.ijggc.2013.12.005
Keywords Post-combustion; CO₂ capture; Chemical absorption; Process intensification (PI); Rotating packed bed (RPB); Process simulation
Public URL https://hull-repository.worktribe.com/output/374777
Publisher URL http://www.sciencedirect.com/science/article/pii/S1750583613004295
Additional Information Copy of an article published in International journal of greenhouse gas control, 2014, v.21 at http://www.sciencedirect.com/science/article/pii/S1750583613004295

Files





You might also like



Downloadable Citations