Technoeconomic feasibility of producing clean fuels from waste plastics: A novel process model
(2024)
Journal Article
Poly(3-hydroxybutyrate)-functionalised multi-walled carbon nanotubes/chitosan green nanocomposite membranes and their application in pervaporation
Abstract
The aim of this research was to align poly(3-hydroxybutyrate) (PHB)-functionalised multi-walled carbon nanotubes (MWCNTs) into a chitosan matrix. The MWCNTs were first functionalised with PHB and aligned into a membrane filter template through a filtration process. A solution casting technique was then applied to cast the chitosan onto the template to form PHB-MWCNT/chitosan nanocomposite membranes. The functionalised MWCNTs and resulting membranes were characterised using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The TGA demonstrated that approximately 40 wt.% of the PHB was successfully functionalised in the MWCNTs, and TEM showed that the polymer wrapped on the nanotubes surface. The presence of the PHB functional moieties helped to improve the dispersion and compatibility of the MWCNTs in the chitosan matrix. When we applied the PHB-MWCNT/chitosan nanocomposite membranes in the pervaporation process of 1,4-dioxane dehydration, the nanocomposite membrane showed a relatively high permeation flux and selectivity towards water, compared to existing membrane. © 2010 Elsevier B.V.
Citation
Ong, Y. T., Ahmad, A. L., Zein, S. H. S., Sudesh, K., & Tan, S. H. (2011). Poly(3-hydroxybutyrate)-functionalised multi-walled carbon nanotubes/chitosan green nanocomposite membranes and their application in pervaporation. Separation and purification technology, 76(3), 419-427. https://doi.org/10.1016/j.seppur.2010.11.013
Journal Article Type | Article |
---|---|
Acceptance Date | Nov 11, 2010 |
Online Publication Date | Nov 19, 2010 |
Publication Date | Jan 14, 2011 |
Deposit Date | Jul 7, 2020 |
Journal | Separation and Purification Technology |
Print ISSN | 1383-5866 |
Publisher | Elsevier |
Peer Reviewed | Peer Reviewed |
Volume | 76 |
Issue | 3 |
Pages | 419-427 |
DOI | https://doi.org/10.1016/j.seppur.2010.11.013 |
Keywords | Multi-walled carbon nanotube (MWCNT); Chitosan; Green nanocomposite membrane; Pervaporation |
Public URL | https://hull-repository.worktribe.com/output/549941 |
Publisher URL | https://www.sciencedirect.com/science/article/pii/S1383586610004600?via%3Dihub |
You might also like
Techno-economic analysis of production of octane booster components derived from lignin
(2024)
Journal Article