All Outputs (658)

Voice restoration after laryngectomy based on magnetic sensing of articulator movement and statistical articulation-to-speech conversion (2017)
Presentation / Conference Contribution
Gonzalez, J. A., Cheah, L. A., Gilbert, J. M., Bai, J., Ell, S. R., Green, P. D., & Moore, R. K. Voice restoration after laryngectomy based on magnetic sensing of articulator movement and statistical articulation-to-speech conversion. Presented at Biomedical Engineering Systems and Technologies 9th International Joint Conference, BIOSTEC 2016, Rome, Italy

© Springer International Publishing AG 2017. In this work, we present a silent speech system that is able to generate audible speech from captured movement of speech articulators. Our goal is to help laryngectomy patients, i.e. patients who have lost... Read More about Voice restoration after laryngectomy based on magnetic sensing of articulator movement and statistical articulation-to-speech conversion.

Towards an intraoral-based silent speech restoration system for post-laryngectomy voice replacement (2017)
Presentation / Conference Contribution
Cheah, L. A., Gilbert, J. M., Gonzalez, J. A., Bai, J., Ell, S. R., Green, P. D., & Moore, R. K. Towards an intraoral-based silent speech restoration system for post-laryngectomy voice replacement. Presented at International Joint Conference on Biomedical Engineering Systems and Technologies BIOSTEC 2016: Biomedical Engineering Systems and Technologies, Rome, Italy

© Springer International Publishing AG 2017, Silent Speech Interfaces (SSIs) are alternative assistive speech technologies that are capable of restoring speech communication for those individuals who have lost their voice due to laryngectomy or disea... Read More about Towards an intraoral-based silent speech restoration system for post-laryngectomy voice replacement.

Scour holes and ripples occur below the hydraulic smooth to rough transition of movable beds (2017)
Journal Article
Leuven, J. R., Kleinhans, M. G., Leuven, J. R. F. W., Braat, L., & Baar, A. (2017). Scour holes and ripples occur below the hydraulic smooth to rough transition of movable beds. Sedimentology, 64(5), 1381-1401. https://doi.org/10.1111/sed.12358

© 2017 The Authors. Scour holes often form in shallow flows over sand on the beach and in morphodynamic scale experiments of river reaches, deltas and estuarine landscapes. The scour holes are on average 2cm deep and 5cm long, regardless of the flow... Read More about Scour holes and ripples occur below the hydraulic smooth to rough transition of movable beds.

Setting an agenda for biofouling research for the marine renewable energy industry (2017)
Journal Article
Loxton, J., MacLeod, {. K., Nall, {. R., McCollin, T., Machado, I., Simas, T., Vance, T., Kenny, C., Want, A., & Miller, R. (2017). Setting an agenda for biofouling research for the marine renewable energy industry. International Journal of Marine Energy, 19, 292--303. https://doi.org/10.1016/j.ijome.2017.08.006

Extensive marine growth on man-made structures in the ocean is commonplace, yet there has been limited discussion about the potential implications of marine growth for the wave and tidal energy industry. In response, the Environmental Interactions of... Read More about Setting an agenda for biofouling research for the marine renewable energy industry.

Modelling tidal stream turbines in a three-dimensional wave-current fully coupled oceanographic model (2017)
Journal Article
Li, X., Li, M., McLelland, S. J., Jordan, L. B., Simmons, S. M., Amoudry, L. O., Ramirez-Mendoza, R., & Thorne, P. D. (2017). Modelling tidal stream turbines in a three-dimensional wave-current fully coupled oceanographic model. Renewable energy, 114, 297-307. https://doi.org/10.1016/j.renene.2017.02.033

© 2017 The Author(s) A tidal turbine simulation system is developed based on a three-dimensional oceanographic numerical model. Both the current and turbulent controlling equations are modified to account for impact of tidal turbines on water velocit... Read More about Modelling tidal stream turbines in a three-dimensional wave-current fully coupled oceanographic model.

Biodiversity characterisation and hydrodynamic consequences of marine fouling communities on submerged marine structures in the Orkney Islands Archipelago, Scotland, UK. (2017)
Journal Article
Want, A., Crawford, R., Kakkonen, {. E., Kiddie, G., Miller, S., Harris, {. E., & Porter, J. (2017). Biodiversity characterisation and hydrodynamic consequences of marine fouling communities on submerged marine structures in the Orkney Islands Archipelago, Scotland, UK. Biofouling, 33(7), 567--579. https://doi.org/10.1080/08927014.2017.1336229

As part of ongoing commitments to produce electricity from renewable energy sources in Scotland, Orkney waters have been targeted for potential large-scale deployment of wave and tidal energy converting devices. Orkney has a well-developed infrastruc... Read More about Biodiversity characterisation and hydrodynamic consequences of marine fouling communities on submerged marine structures in the Orkney Islands Archipelago, Scotland, UK..

Rainfall-runoff properties of tephra: simulated effects of grain-size and antecedent rainfall (2017)
Journal Article
Jones, R., Thomas, R. E., Peakall, J., & Manville, V. (2017). Rainfall-runoff properties of tephra: simulated effects of grain-size and antecedent rainfall. Geomorphology, 282, 39-51. https://doi.org/10.1016/j.geomorph.2016.12.023

Rain-triggered lahars (RTLs) are a significant and often persistent secondary volcanic hazard at many volcanoes around the world. Rainfall on unconsolidated volcaniclastic material is the primary initiation mechanism of RTLs: the resultant flows have... Read More about Rainfall-runoff properties of tephra: simulated effects of grain-size and antecedent rainfall.

A sustainability framework for engineering carbon capture soil in transport infrastructure (2017)
Journal Article
Kolosz, B. W., Goddard, M. A., Jorat, M. E., Aumonier, J., Sohi, S. P., & Manning, D. A. (2017). A sustainability framework for engineering carbon capture soil in transport infrastructure. International Journal of Transport Development and Integration, 1(1), 74-83. https://doi.org/10.2495/TDI-V1-N1-74-83

Recent research has demonstrated considerable potential for artificial soils to be designed for carbon capture. The incorporation of quarry fines enables the accumulation of atmospheric CO2 in newly formed carbonate minerals. However, the rate and tr... Read More about A sustainability framework for engineering carbon capture soil in transport infrastructure.

Evaluation of a silent speech interface based on magnetic sensing and deep learning for a phonetically rich vocabulary (2017)
Presentation / Conference Contribution
Gonzalez, J. A., Cheah, L. A., Green, P. D., Gilbert, J. M., Ell, S. R., Moore, R. K., & Holdsworth, E. Evaluation of a silent speech interface based on magnetic sensing and deep learning for a phonetically rich vocabulary. Presented at Interspeech, Stockholm, Sweden

Copyright © 2017 ISCA. To help people who have lost their voice following total laryngectomy, we present a speech restoration system that produces audible speech from articulator movement. The speech articulators are monitored by sensing changes in m... Read More about Evaluation of a silent speech interface based on magnetic sensing and deep learning for a phonetically rich vocabulary.

Restoring Speech Following Total Removal of the Larynx (2017)
Presentation / Conference Contribution
Gonzalez, J. A., Cheah, L. A., Green, P. D., Gilbert, J. M., Ell, S. R., Moore, R. K., & Holdsworth, E. Restoring Speech Following Total Removal of the Larynx

© 2017 The authors and IOS Press. All rights reserved. By speech articulator movement and training a transformation to audio we can restore the power of speech to someone who has lost their larynx. We sense changes in magnetic field caused by movemen... Read More about Restoring Speech Following Total Removal of the Larynx.

Turf wars : conflict and cooperation in the management of Wallingfen (East Yorkshire), 1281-1781 (2016)
Journal Article
Crouch, D., & McDonagh, B. (2016). Turf wars : conflict and cooperation in the management of Wallingfen (East Yorkshire), 1281-1781. The Agricultural history review, 64(2), 133-156

This paper explores the origins and management of Wallingfen, a large tract of waterlogged marshes and carrs near Howden in the East Riding of Yorkshire. Subject to annual flooding throughout much of its history, the area was utilized by the surround... Read More about Turf wars : conflict and cooperation in the management of Wallingfen (East Yorkshire), 1281-1781.

Three-dimensional flow structure and bed morphology in large elongate meander loops with different outer bank roughness characteristics (2016)
Journal Article
Konsoer, K. M., Rhoads, B. L., Best, J. L., Langendoen, E. J., Abad, J. D., Parsons, D. R., & García, M. H. (2016). Three-dimensional flow structure and bed morphology in large elongate meander loops with different outer bank roughness characteristics. Water Resources Research, 52(12), 9621-9641. https://doi.org/10.1002/2016wr019040

© 2016. American Geophysical Union. All Rights Reserved. Few studies have examined the three-dimensional flow structure and bed morphology within elongate loops of large meandering channels. The present study focuses on the spatial patterns of three-... Read More about Three-dimensional flow structure and bed morphology in large elongate meander loops with different outer bank roughness characteristics.

Large scale three-dimensional modelling for wave and tidal energy resource and environmental impact: Methodologies for quantifying acceptable thresholds for sustainable exploitation (2016)
Journal Article
Gallego, A., Side, J., Baston, S., Waldman, S., Bell, M., James, M., Davies, I., O'Hara Murray, R., Heath, M., Sabatino, A., McKee, D., McCaig, C., Karunarathna, H., Fairley, I., Chatzirodou, A., Venugopal, V., Nemalidinne, R., Yung, T. Z., Vögler, A., MacIver, R., & Burrows, M. (2017). Large scale three-dimensional modelling for wave and tidal energy resource and environmental impact: Methodologies for quantifying acceptable thresholds for sustainable exploitation. Ocean and Coastal Management, 147, 67-77. https://doi.org/10.1016/j.ocecoaman.2016.11.025

Extreme flood-driven fluvial bank erosion and sediment loads: direct process measurements using integrated Mobile Laser Scanning (MLS) and hydro-acoustic techniques: Direct measurement of flood-driven erosion using MLS and MBES (2016)
Journal Article
Leyland, J., Hackney, C. R., Darby, S. E., Parsons, D. R., Best, J. L., Nicholas, A. P., Aalto, R., & Lague, D. (2017). Extreme flood-driven fluvial bank erosion and sediment loads: direct process measurements using integrated Mobile Laser Scanning (MLS) and hydro-acoustic techniques: Direct measurement of flood-driven erosion using MLS and MBES. Earth surface processes and landforms : the journal of the British Geomorphological Research Group, 42(2), 334-346. https://doi.org/10.1002/esp.4078

Copyright © 2016 John Wiley & Sons, Ltd. This methods paper details the first attempt at monitoring bank erosion, flow and suspended sediment at a site during flooding on the Mekong River induced by the passage of tropical cyclones. We deployed int... Read More about Extreme flood-driven fluvial bank erosion and sediment loads: direct process measurements using integrated Mobile Laser Scanning (MLS) and hydro-acoustic techniques: Direct measurement of flood-driven erosion using MLS and MBES.

Erratum to “Geometrical and mechanical properties of four species of northern European brown macroalgae” [Coast. Eng. 84 (2014) 73–80] (2016)
Journal Article
Henry, P. Y., Paul, M., & Thomas, R. (2017). Erratum to “Geometrical and mechanical properties of four species of northern European brown macroalgae” [Coast. Eng. 84 (2014) 73–80]. Coastal Engineering, 120, 36-37. https://doi.org/10.1016/j.coastaleng.2016.11.002

© 2016 This erratum concerns Eq. (1) used in Paul et al. [3] which is the same as Eq. (1) in Paul and Henry [4]. A three-point bending test with clamped ends was performed on macroalga blade samples. As suggested in Fig. 1, this mechanical test was c... Read More about Erratum to “Geometrical and mechanical properties of four species of northern European brown macroalgae” [Coast. Eng. 84 (2014) 73–80].

Does the canopy mixing layer model apply to highly flexible aquatic vegetation? Insights from numerical modelling (2016)
Journal Article
Marjoribanks, T. I., Hardy, R. J., Lane, S. N., & Parsons, D. R. (2017). Does the canopy mixing layer model apply to highly flexible aquatic vegetation? Insights from numerical modelling. Environmental Fluid Mechanics, 17(2), 277-301. https://doi.org/10.1007/s10652-016-9482-z

© 2016, The Author(s). Vegetation is a characteristic feature of shallow aquatic flows such as rivers, lakes and coastal waters. Flow through and above aquatic vegetation canopies is commonly described using a canopy mixing layer analogy which provid... Read More about Does the canopy mixing layer model apply to highly flexible aquatic vegetation? Insights from numerical modelling.

Fluvial sediment supply to a mega-delta reduced by shifting tropical-cyclone activity (2016)
Journal Article
Darby, S. E., Hackney, C. R., Leyland, J., Kummu, M., Lauri, H., Parsons, D. R., Best, J. L., Nicholas, A. P., & Aalto, R. E. (2016). Fluvial sediment supply to a mega-delta reduced by shifting tropical-cyclone activity. Nature, 539(7628), 276-279. https://doi.org/10.1038/nature19809

© 2016 Macmillan Publishers Limited, part of Springer Nature. All rights reserved. The world's rivers deliver 19 billion tonnes of sediment to the coastal zone annually, with a considerable fraction being sequestered in large deltas, home to over 500... Read More about Fluvial sediment supply to a mega-delta reduced by shifting tropical-cyclone activity.

Comparison of a black-box model to a traditional numerical model for hydraulic head prediction (2016)
Journal Article
Tapoglou, E., Chatzakis, A., & Karatzas, G. P. (2016). Comparison of a black-box model to a traditional numerical model for hydraulic head prediction. Global NEST journal, 18(4), 761-770. https://doi.org/10.30955/gnj.002002

Two different methodologies for hydraulic head simulation were compared in this study. The first methodology is a classic numerical groundwater flow simulation model, Princeton Transport Code (PTC), while the second one is a black-box approach that u... Read More about Comparison of a black-box model to a traditional numerical model for hydraulic head prediction.

Two decades of numerical modelling to understand long term fluvial archives: advances and future perspectives (2016)
Journal Article
Veldkamp, A., Baartman, J. E. M., Coulthard, T. J., Maddy, D., Schoorl, J. M., Storms, J. E. A., Temme, A. J. A. M., van Balen, R., van De Wiel, M. J., van Gorp, W., Viveen, W., Westaway, R., & Whittaker, A. C. (2017). Two decades of numerical modelling to understand long term fluvial archives: advances and future perspectives. Quaternary science reviews, 166, 177-187. https://doi.org/10.1016/j.quascirev.2016.10.002

© 2016 Elsevier Ltd The development and application of numerical models to investigate fluvial sedimentary archives has increased during the last decades resulting in a sustained growth in the number of scientific publications with keywords, ‘fluvial... Read More about Two decades of numerical modelling to understand long term fluvial archives: advances and future perspectives.

Experimental investigation on performance of fabrics for indirect evaporative cooling applications (2016)
Journal Article
Xu, P., Ma, X., Zhao, X., & Fancey, K. S. (2016). Experimental investigation on performance of fabrics for indirect evaporative cooling applications. Building and Environment, 110, 104-114. https://doi.org/10.1016/j.buildenv.2016.10.003

© 2016 Indirect evaporative cooling, by using water evaporation to absorb heat to lower the air temperature without adding moisture, is an extremely low energy and environmentally friendly cooling principle. The properties of the wet channel surface... Read More about Experimental investigation on performance of fabrics for indirect evaporative cooling applications.