Skip to main content

Research Repository

Advanced Search

All Outputs (458)

Simulation and experiment on thermal performance of a micro-channel heat pipe under different evaporator temperatures and tilt angles (2019)
Journal Article
Li, G., Diallo, T. M., Akhlaghi, Y. G., Shittu, S., Zhao, X., Ma, X., & Wang, Y. (2019). Simulation and experiment on thermal performance of a micro-channel heat pipe under different evaporator temperatures and tilt angles. Energy, 179, 549-557. https://doi.org/10.1016/j.energy.2019.05.040

© 2019 Elsevier Ltd For a solar collector with a heat pipe, the tilt angle is an important factor which has a direct impact on the orientation (surface azimuth angle) and affects the amount of solar radiation reaching the surface of the collector. Th... Read More about Simulation and experiment on thermal performance of a micro-channel heat pipe under different evaporator temperatures and tilt angles.

Optimized high performance thermoelectric generator with combined segmented and asymmetrical legs under pulsed heat input power (2019)
Journal Article
Shittu, S., Li, G., Zhao, X., Ma, X., Akhlaghi, Y. G., & Ayodele, E. (2019). Optimized high performance thermoelectric generator with combined segmented and asymmetrical legs under pulsed heat input power. Journal of power sources, 428, 53-66. https://doi.org/10.1016/j.jpowsour.2019.04.099

In this study, a segmented asymmetrical thermoelectric generator (SASTEG) is numerically investigated to optimize its electrical performance and mechanical reliability under transient and steady state conditions. The thermal and electrical performanc... Read More about Optimized high performance thermoelectric generator with combined segmented and asymmetrical legs under pulsed heat input power.

Evaluation of the performance and economic viability of a novel low temperature carbon capture process (2019)
Journal Article
Willson, P., Lychnos, G., Clements, A., Michailos, S., Font-Palma, C., Diego, M. E., Pourkashanian, M., & Howe, J. (2019). Evaluation of the performance and economic viability of a novel low temperature carbon capture process. International journal of greenhouse gas control, 86, 1-9. https://doi.org/10.1016/j.ijggc.2019.04.001

© 2019 Elsevier Ltd A novel Advanced Cryogenic Carbon Capture (A3C) process is being developed using low cost but high intensity heat transfer to achieve high CO2 capture efficiencies with a much reduced energy consumption and process equipment size.... Read More about Evaluation of the performance and economic viability of a novel low temperature carbon capture process.

Comparative study of a concentrated photovoltaic-thermoelectric system with and without flat plate heat pipe (2019)
Journal Article
Shittu, S., Li, G., Zhao, X., Golizadeh Akhlaghi, Y., Ma, X., & Yu, M. (2019). Comparative study of a concentrated photovoltaic-thermoelectric system with and without flat plate heat pipe. Energy Conversion and Management, 193, 1-14. https://doi.org/10.1016/j.enconman.2019.04.055

Thermal management of photovoltaic cells is an essential research objective for increasing the conversion efficiency of the photovoltaic. Flat plate heat pipe is a passive cooling device capable of effectively reducing the solar cell temperature. The... Read More about Comparative study of a concentrated photovoltaic-thermoelectric system with and without flat plate heat pipe.

Advancements in thermoelectric generators for enhanced hybrid photovoltaic system performance (2019)
Journal Article
Shittu, S., Li, G., Akhlaghi, Y. G., Ma, X., Zhao, X., & Ayodele, E. (2019). Advancements in thermoelectric generators for enhanced hybrid photovoltaic system performance. Renewable & sustainable energy reviews, 109, 24-54. https://doi.org/10.1016/j.rser.2019.04.023

Effective thermal management of photovoltaic cells is essential for improving its conversion efficiency and increasing its life span. Solar cell temperature and efficiency have an inverse relationship therefore, cooling of solar cells is a critical r... Read More about Advancements in thermoelectric generators for enhanced hybrid photovoltaic system performance.

A model to predict acoustic resonant frequencies of distributed Helmholtz resonators on gas turbine engines (2019)
Journal Article
Wang, J., Rubini, P., Qin, Q., & Houston, B. (2019). A model to predict acoustic resonant frequencies of distributed Helmholtz resonators on gas turbine engines. Applied Sciences, 9(7), Article 1419. https://doi.org/10.3390/app9071419

© 2019 by the authors. Helmholtz resonators, traditionally designed as a narrow neck backed by a cavity, are widely applied to attenuate combustion instabilities in gas turbine engines. The use of multiple small holes with an equivalent open area to... Read More about A model to predict acoustic resonant frequencies of distributed Helmholtz resonators on gas turbine engines.

The design, construction and experimental characterization of a novel concentrating photovoltaic/daylighting window for green building roof (2019)
Journal Article
Xuan, Q., Li, G., Lu, Y., Zhao, B., Zhao, X., & Pei, G. (2019). The design, construction and experimental characterization of a novel concentrating photovoltaic/daylighting window for green building roof. Energy, 175, 1138-1152. https://doi.org/10.1016/j.energy.2019.03.135

A novel concentrating photovoltaic/daylighting window to achieve the multi-function of the electricity generation and daylighting for buildings has been designed, constructed and experimentally characterized. It’s found that the concentrating photovo... Read More about The design, construction and experimental characterization of a novel concentrating photovoltaic/daylighting window for green building roof.

Viscoelastically prestressed polymeric matrix composites – effects of delayed moulding on Charpy impact properties (2019)
Journal Article
Qin, Y., & Fancey, K. S. (2019). Viscoelastically prestressed polymeric matrix composites – effects of delayed moulding on Charpy impact properties. Composites Part A: Applied Science and Manufacturing, 121, 169-174. https://doi.org/10.1016/j.compositesa.2019.03.014

Viscoelastically prestressed polymeric matrix composites (VPPMCs) are produced by subjecting fibres to creep, then releasing the creep load before moulding. Previous work has demonstrated mechanical property improvements up to ~50% from nylon 6,6 fib... Read More about Viscoelastically prestressed polymeric matrix composites – effects of delayed moulding on Charpy impact properties.

Empirical prediction of traffic noise transmission loss across plenum windows (2019)
Journal Article
Li, X., Tong, Y. G., Tang, S. K., & Lau, K. K. (2019). Empirical prediction of traffic noise transmission loss across plenum windows. Applied acoustics. Acoustique appliqué. Angewandte Akustik, 151, 45-54. https://doi.org/10.1016/j.apacoust.2019.03.004

A parametric study on the traffic noise transmission loss across plenum windows was carried out experimentally in this investigation in an attempt to establish a simple empirical model for predicting this transmission loss. A total of fourteen full s... Read More about Empirical prediction of traffic noise transmission loss across plenum windows.

High performance and thermal stress analysis of a segmented annular thermoelectric generator (2019)
Journal Article
Shittu, S., Li, G., Zhao, X., Ma, X., Akhlaghi, Y. G., & Ayodele, E. (2019). High performance and thermal stress analysis of a segmented annular thermoelectric generator. Energy Conversion and Management, 184, 180-193. https://doi.org/10.1016/j.enconman.2019.01.064

Annular thermoelectric generators can eliminate the thermal contact resistance formed due to geometry mismatch when flat-plate thermoelectric generators are used with round shaped heat source or heat sink. Therefore, in this study, the numerical simu... Read More about High performance and thermal stress analysis of a segmented annular thermoelectric generator.

Comparative analysis of thermoelectric elements optimum geometry between photovoltaic-thermoelectric and solar thermoelectric (2019)
Journal Article
Li, G., Shittu, S., Ma, X., & Zhao, X. (2019). Comparative analysis of thermoelectric elements optimum geometry between photovoltaic-thermoelectric and solar thermoelectric. Energy, 171, 599-610. https://doi.org/10.1016/j.energy.2019.01.057

The optimization of the thermoelectric (TE) device geometry is one of the significant ways to improve its efficiency and power output. However, the complex relationship between the Photovoltaic and the thermoelectric device necessitates the need for... Read More about Comparative analysis of thermoelectric elements optimum geometry between photovoltaic-thermoelectric and solar thermoelectric.

Analytical and experimental study of an innovative multiple-throughout-flowing micro-channel-panels-array for a solar-powered rural house space heating system (2019)
Journal Article
Fan, Y., Zhao, X., Li, G., Cheng, Y., Zhou, J., Yu, M., Du, Z., Ji, J., Zhu, Z., Diallo, T., & Ma, X. (2019). Analytical and experimental study of an innovative multiple-throughout-flowing micro-channel-panels-array for a solar-powered rural house space heating system. Energy, 171, 566-580. https://doi.org/10.1016/j.energy.2019.01.049

This paper presents a combined analytical and experimental study of an innovative multiple-throughout-flowing micro-channel-panels-array applicable to a solar-powered rural house space heating system. This array, compared to the traditional one-to-on... Read More about Analytical and experimental study of an innovative multiple-throughout-flowing micro-channel-panels-array for a solar-powered rural house space heating system.

Experimental and analytic study of a hybrid solar/biomass rural heating system (2019)
Journal Article
Zhang, X., Yang, J., Fan, Y., Zhao, X., Yan, R., Zhao, J., & Myers, S. (2019). Experimental and analytic study of a hybrid solar/biomass rural heating system. Energy, 116392. https://doi.org/10.1016/j.energy.2019.116392

© 2019 Elsevier Ltd This paper presents a dedicated analytic and experimental study of a hybrid solar/biomass space heating system incorporating a micro-channel solar thermal panels-array, a biomass boiler and a dedicated control algorithm. This syst... Read More about Experimental and analytic study of a hybrid solar/biomass rural heating system.

Modelling noise annoyance responses to combined sound sources and views of sea, road traffic, and mountain greenery (2018)
Journal Article
Chau, C. K., Leung, T. M., Xu, J. M., & Tang, S. K. (2018). Modelling noise annoyance responses to combined sound sources and views of sea, road traffic, and mountain greenery. The Journal of the Acoustical Society of America, 144(6), 3503-3513. https://doi.org/10.1121/1.5083833

This paper studies the effect of human perception of visual and audio settings in an urban environment on annoyance. Video clips were projected onto a window panel of a living room to simulate neighborhood views containing different percentages of se... Read More about Modelling noise annoyance responses to combined sound sources and views of sea, road traffic, and mountain greenery.

Enhancement of wave energy absorption efficiency via geometry and power take-off damping tuning (2018)
Journal Article
Jin, S., Patton, R. J., & Guo, B. (2019). Enhancement of wave energy absorption efficiency via geometry and power take-off damping tuning. Energy, 169, 819-832. https://doi.org/10.1016/j.energy.2018.12.074

In this work a three dimensional computational fluid dynamic (CFD) model has been constructed based on a 1/50 scale heaving point absorber wave energy converter (PAWEC). The CFD model is validated first via wave tank tests and then is applied in this... Read More about Enhancement of wave energy absorption efficiency via geometry and power take-off damping tuning.

Fundamental studies of ultrasonic melt processing (2018)
Journal Article
Eskin, D. G., Tzanakis, I., Wang, F., Lebon, G. S., Subroto, T., Pericleous, K., & Mi, J. (2019). Fundamental studies of ultrasonic melt processing. Ultrasonics Sonochemistry, 52, 455-467. https://doi.org/10.1016/j.ultsonch.2018.12.028

Ultrasonic (cavitation) melt processing attracts considerable interest from both academic and industrial communities as a promising route to provide clean, environment friendly and energy efficient solutions for some of the core issues of the metal c... Read More about Fundamental studies of ultrasonic melt processing.

Frosting performance of a nanoporous hydrophilic aluminum surface (2018)
Journal Article
Yang, W., Zeng, B., Zhang, Y., He, S., & Zhao, X. (2018). Frosting performance of a nanoporous hydrophilic aluminum surface. Energies, 11(12), Article 3483. https://doi.org/10.3390/en11123483

© 2018 by the authors. As an efficient energy-saving piece of equipment, an air-source heat pump can not only reduce the energy consumption required for heating, but can also reduce the pollution from fossil consumption. However, when an air-source h... Read More about Frosting performance of a nanoporous hydrophilic aluminum surface.

The mechanical loading and muscle activation of four common exercises used in osteoporosis prevention for early postmenopausal women (2018)
Journal Article
Montgomery, G., Abt, G., Dobson, C., Smith, T., Evans, W., & Ditroilo, M. (2019). The mechanical loading and muscle activation of four common exercises used in osteoporosis prevention for early postmenopausal women. Journal of Electromyography and Kinesiology, 44, 124-131. https://doi.org/10.1016/j.jelekin.2018.12.004

High impact exercise can reduce postmenopausal bone loss, however stimulus frequency (loading cycles per second) can affect osteogenesis. We aimed to examine the effect of stimulus frequency on the mechanical loading of four common osteoporosis preve... Read More about The mechanical loading and muscle activation of four common exercises used in osteoporosis prevention for early postmenopausal women.

In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields (2018)
Journal Article
Wang, S., Kang, J., Guo, Z., Lee, T. L., Zhang, X., Wang, Q., Deng, C., & Mi, J. (2019). In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields. Acta Materialia, 165, 388-397. https://doi.org/10.1016/j.actamat.2018.11.053

The fatigue fragmentation of dendritic structures of a SCN-5wt.% Camphor transparent alloy in an ultrasound field was investigated systematically using high-speed imaging. Dynamic interactions between oscillating ultrasonic bubbles and the primary an... Read More about In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields.