All Outputs (332)

Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach (2016)
Journal Article
Poggio, D., Walker, M., Nimmo, W., Ma, L., & Pourkashanian, M. (2016). Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach. Waste Management, 53, 40-54. https://doi.org/10.1016/j.wasman.2016.04.024

This work proposes a novel and rigorous substrate characterisation methodology to be used with ADM1 to simulate the anaerobic digestion of solid organic waste. The proposed method uses data from both direct substrate analysis and the methane producti... Read More about Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach.

Geometrical parameter combinations that correlate with early interaural cross-correlation coefficients in a performance hall (2016)
Journal Article
Cheung, L. Y., & Tang, S. K. (2016). Geometrical parameter combinations that correlate with early interaural cross-correlation coefficients in a performance hall. The Journal of the Acoustical Society of America, 139(5), 2741-2753. https://doi.org/10.1121/1.4948995

The previous binaural data of the authors measured inside two multi-purpose performance halls are re-analyzed using regression in this study. It is done in an attempt to establish a framework that can improve the prediction of early interaural cross-... Read More about Geometrical parameter combinations that correlate with early interaural cross-correlation coefficients in a performance hall.

The Impact of Technology-supported and Triangulated Writing Tasks on a Pilot Interdisciplinary Undergraduate Subject for Construction Disciplines (2016)
Journal Article
Kam, R., Tang, S. K., & Lee, L. (2016). The Impact of Technology-supported and Triangulated Writing Tasks on a Pilot Interdisciplinary Undergraduate Subject for Construction Disciplines. Computers and Composition, 40, 131-150. https://doi.org/10.1016/j.compcom.2016.03.004

This article presents findings from the technology-supported implementation of triangulated writing tasks in a pilot interdisciplinary subject for construction disciplines in a Hong Kong university, and discusses these findings in relation to the bro... Read More about The Impact of Technology-supported and Triangulated Writing Tasks on a Pilot Interdisciplinary Undergraduate Subject for Construction Disciplines.

Estimation of source location and ground impedance using a hybrid multiple signal classification and Levenberg-Marquardt approach (2016)
Journal Article
Tam, K. C., Lau, S. K., & Tang, S. K. (2016). Estimation of source location and ground impedance using a hybrid multiple signal classification and Levenberg-Marquardt approach. Journal of Sound and Vibration, 374, 279-296. https://doi.org/10.1016/j.jsv.2016.03.011

A microphone array signal processing method for locating a stationary point source over a locally reactive ground and for estimating ground impedance is examined in detail in the present study. A non-linear least square approach using the Levenberg-M... Read More about Estimation of source location and ground impedance using a hybrid multiple signal classification and Levenberg-Marquardt approach.

A new strategy for integration of fault estimation within fault-tolerant control (2016)
Journal Article
Lan, J., & Patton, R. J. (2016). A new strategy for integration of fault estimation within fault-tolerant control. Automatica : the journal of IFAC, the International Federation of Automatic Control, 69, 48-59. https://doi.org/10.1016/j.automatica.2016.02.014

© 2016 Elsevier Ltd. All rights reserved. The problem of active fault tolerant control (FTC) of dynamical systems involves the process of fault detection and isolation/fault estimation (FDI/FE) used to either make a decision as to when and how to cha... Read More about A new strategy for integration of fault estimation within fault-tolerant control.

A silent speech system based on permanent magnet articulography and direct synthesis (2016)
Journal Article
Gonzalez, J. A., Cheah, L. A., Gilbert, J. M., Bai, J., Ell, S. R., Green, P. D., & Moore, R. K. (2016). A silent speech system based on permanent magnet articulography and direct synthesis. Computer speech & language, 39, 67-87. https://doi.org/10.1016/j.csl.2016.02.002

In this paper we present a silent speech interface (SSI) system aimed at restoring speech communication for individuals who have lost their voice due to laryngectomy or diseases affecting the vocal folds. In the proposed system, articulatory data cap... Read More about A silent speech system based on permanent magnet articulography and direct synthesis.

Assessment and parameter identification of simplified models to describe the kinetics of semi-continuous biomethane production from anaerobic digestion of green and food waste (2016)
Journal Article
Owhondah, R. O., Walker, M., Ma, L., Nimmo, B., Ingham, D. B., Poggio, D., & Pourkashanian, M. (2016). Assessment and parameter identification of simplified models to describe the kinetics of semi-continuous biomethane production from anaerobic digestion of green and food waste. Bioprocess and biosystems engineering, 39(6), 977-992. https://doi.org/10.1007/s00449-016-1577-x

Biochemical reactions occurring during anaerobic digestion have been modelled using reaction kinetic equations such as first-order, Contois and Monod which are then combined to form mechanistic models. This work considers models which include between... Read More about Assessment and parameter identification of simplified models to describe the kinetics of semi-continuous biomethane production from anaerobic digestion of green and food waste.

Skeletal immaturity, rostral sparing, and disparate hip morphologies as biomechanical causes for Legg-Calvé-Perthes’ disease (2016)
Journal Article
Berthaume, M. A., Perry, D. C., Dobson, C. A., Witzel, U., Clarke, N. M., & Fagan, M. J. (2016). Skeletal immaturity, rostral sparing, and disparate hip morphologies as biomechanical causes for Legg-Calvé-Perthes’ disease. Clinical Anatomy, 29(6), 759-772. https://doi.org/10.1002/ca.22690

Legg-Calvé-Perthes' (Perthes') disease is a developmental disease of the hip joint that may result in numerous short and long term problems. The etiology of the disease remains largely unknown, but the mechanism is believed to be vascular and/or biom... Read More about Skeletal immaturity, rostral sparing, and disparate hip morphologies as biomechanical causes for Legg-Calvé-Perthes’ disease.

Quality measurements of an UWB reduced-size CPW-fed aperture antenna (2016)
Book Chapter
Zolfaghari, M., Riley, N. G., Mehdawi, M., Fanan, A., Ammar, M., & Meng, F. (2016). Quality measurements of an UWB reduced-size CPW-fed aperture antenna. . Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/TELFOR.2015.7377526

The paper presents a characterization of a compact co-planar waveguide (CPW)-fed slot loaded low return loss planar printed antenna designed for wireless communication and ultra-wideband (UWB) applications. Following a review of the antenna design, w... Read More about Quality measurements of an UWB reduced-size CPW-fed aperture antenna.

Comparison of spectrum occupancy measurements using software defined radio RTL-SDR with a conventional spectrum analyzer approach (2016)
Conference Proceeding
Fanan, A., Riley, N., Mehdawi, M., Ammar, M., & Zolfaghari, M. (2016). Comparison of spectrum occupancy measurements using software defined radio RTL-SDR with a conventional spectrum analyzer approach. . https://doi.org/10.1109/TELFOR.2015.7377447

In the present day Cognitive Radio has become a realistic option for solution of the spectrum scarcity problem in wireless communication. Recently, the TV band has attracted attention due to the considerable potential for exploitation of available TV... Read More about Comparison of spectrum occupancy measurements using software defined radio RTL-SDR with a conventional spectrum analyzer approach.

Spectrum occupancy measurements and lessons learned in the context of cognitive radio (2016)
Conference Proceeding
Mehdawi, M., Riley, N. G., Ammar, M., Fanan, A., & Zolfaghari, M. (2016). Spectrum occupancy measurements and lessons learned in the context of cognitive radio. . https://doi.org/10.1109/TELFOR.2015.7377446

Various measurement campaigns have shown that numerous spectrum bands are vacant even though licenses have been issued by the regulatory agencies. Dynamic spectrum access (DSA) based on Cognitive Radio (CR) has been regarded as a prospective solution... Read More about Spectrum occupancy measurements and lessons learned in the context of cognitive radio.

Multi-scale characterisation of the 3D microstructure of a thermally-shocked bulk metallic glass matrix composite (2016)
Journal Article
Zhang, W., Bodey, A. J., Sui, T., Kockelmann, W., Rau, C., Korsunsky, A. M., & Mi, J. (2016). Multi-scale characterisation of the 3D microstructure of a thermally-shocked bulk metallic glass matrix composite. Scientific reports, 6(1), 18545-1-18545-7. https://doi.org/10.1038/srep18545

Bulk metallic glass matrix composites (BMGMCs) are a new class of metal alloys which have significantly increased ductility and impact toughness, resulting from the ductile crystalline phases distributed uniformly within the amorphous matrix. However... Read More about Multi-scale characterisation of the 3D microstructure of a thermally-shocked bulk metallic glass matrix composite.

Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography (2015)
Book Chapter
Cheah, L. A., Gilbert, J. M., Gonzalez, J. A., Bai, J., Ell, S. R., Fagan, M. J., …Rychenko, S. I. (2015). Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography. In Biomedical Engineering Systems and Technologies; Communications in Computer and Information Science (324-337). Springer Verlag. https://doi.org/10.1007/978-3-319-27707-3_20

Abstract: A new wearable silent speech interface (SSI) based on Permanent Magnetic Articulography (PMA) was developed with the involvement of end users in the design process. Hence, desirable features such as appearance, port-ability, ease of use and... Read More about Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography.

Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy (2015)
Journal Article
Mi, J., Connolley, T., Eskin, D., & Wang, F. (2016). Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy. Journal of Crystal Growth, 435, 24-30. https://doi.org/10.1016/j.jcrysgro.2015.11.034

High intensity ultrasonic melt treatment was applied to an Al–0.4 wt% Ti alloy over three selected temperature ranges: 810 to 770 °C (above liquidus), 770 to 730 °C (across liquidus), and 730 to 690 °C (below liquidus). The size and morphology of the... Read More about Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy.

Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions (2015)
Journal Article
Luo, X., & Wang, M. (2016). Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions. International journal of greenhouse gas control, 48(Part 2), 312-320. https://doi.org/10.1016/j.ijggc.2015.11.014

Carbon capture for fossil fuel power generation attracts an increasing attention in order to address the significant challenge of global climate change. This study aims to explore the optimal operation under different market conditions for an assumed... Read More about Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions.

Design optimization of TBM disc cutters for different geological conditions (2015)
Journal Article
Xia, Y., Zhang, K., & Liu, J. (2015). Design optimization of TBM disc cutters for different geological conditions. World Journal of Engineering and Technology, 3(4), 218-231. https://doi.org/10.4236/wjet.2015.34023

A novel optimization methodology for the disc cutter designs of tunnel boring machines (TBM) was presented. To fully understand the characteristics and performance of TBM cutters, a comprehensive list of performance parameters were investigated, incl... Read More about Design optimization of TBM disc cutters for different geological conditions.

Noise control of dipole source by using micro-perforated panel housing (2015)
Journal Article
Xi, Q., Choy, Y. S., Cheng, L., & Tang, S. K. (2016). Noise control of dipole source by using micro-perforated panel housing. Journal of Sound and Vibration, 362, 39-55. https://doi.org/10.1016/j.jsv.2015.09.047

Mitigating low-frequency noise in a small ducted fan system such as hairdryer is still a technical challenge. Traditional duct lining with porous materials work ineffectively due to the limitation of its thickness and length of small domestic product... Read More about Noise control of dipole source by using micro-perforated panel housing.

Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites (2015)
Journal Article
Fancey, K. S., & Wang, B. (2016). Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites. Composites. Part B, Engineering, 87, 336-342. https://doi.org/10.1016/j.compositesb.2015.09.003

A viscoelastically prestressed polymeric matrix composite (VPPMC) is produced by applying a tensile creep load to polymeric fibres, the load being released before the fibres are moulded into a polymeric matrix. The viscoelastically recovering fibres... Read More about Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites.

In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth (2015)
Journal Article
Li, F., Zhang, J., Dong, Q., Dai, Y., Fu, Y., Xie, H., …Sun, B. (2015). In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth. Materials Characterization, 109, 9-18. https://doi.org/10.1016/j.matchar.2015.09.008

© 2015 Elsevier Inc. All rights reserved. Special growth pattern representing unique growth conditions is a vital clue to investigate the morphology evolution mechanism in metallic alloy solidification. The dendrite pattern and growth orientation of... Read More about In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth.

A method to estimate trends in distributions of 1 min rain rates from numerical weather prediction data (2015)
Journal Article
Paulson, K., Ranatunga, C., & Bellerby, T. (2015). A method to estimate trends in distributions of 1 min rain rates from numerical weather prediction data. Radio science, 50(9), 931-940. https://doi.org/10.1002/2015RS005651

It is known that the rain rate exceeded 0.01% of the time in the UK has experienced an increasing trend over the last 20 years. It is very likely that rain fade and outage experience a similar trend. This paper presents a globally applicable method t... Read More about A method to estimate trends in distributions of 1 min rain rates from numerical weather prediction data.