Outputs (34)

A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid state (2016)
Journal Article
Wang, F., Eskin, D., Mi, J., Connolley, T., Lindsay, J., & Mounib, M. (2016). A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid state. Acta Materialia, 116, 354-363. https://doi.org/10.1016/j.actamat.2016.06.056

The mechanism underlying the considerable refinement of primary Al3Ti intermetallic particles induced by ultrasonic treatment (UST) in an Al-0.4 wt% Ti alloy in the fully liquid state was investigated. Scanning electron microscopy, energy dispersive... Read More about A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid state.

Sound transmission across a plenum window with an active noise cancellation system (2016)
Journal Article
Tang, S. K., Tong, Y. G., & Tsui, K. L. (2016). Sound transmission across a plenum window with an active noise cancellation system. Noise Control Engineering Journal, 64(4), 423-431. https://doi.org/10.3397/1/376390

A series of experiments was conducted in the present study in an attempt to understand how the implementation of active noise control would affect the sound transmission across a plenum window. A simple squared pressure control scheme with three erro... Read More about Sound transmission across a plenum window with an active noise cancellation system.

Monolith-based68Ga processing: A new strategy for purification to facilitate direct radiolabelling methods (2016)
Journal Article
He, P., Burke, B. P., Clemente, G. S., Brown, N., Pamme, N., & Archibald, S. J. (2016). Monolith-based68Ga processing: A new strategy for purification to facilitate direct radiolabelling methods. Reaction Chemistry and Engineering, 1(4), 361-365. https://doi.org/10.1039/c6re00081a

The post-processing of68Ga generator eluate by means of a novel high capacity cation-exchange silica monolith column has been validated in this work. Quantitative release of a purified68Ga solution in high concentration can be achieved using weak aci... Read More about Monolith-based68Ga processing: A new strategy for purification to facilitate direct radiolabelling methods.

Tibial impacts and muscle activation during walking, jogging and running when performed overground, and on motorised and non-motorised treadmills (2016)
Journal Article
Montgomery, G., Abt, G., Dobson, C., Smith, T., & Ditroilo, M. (2016). Tibial impacts and muscle activation during walking, jogging and running when performed overground, and on motorised and non-motorised treadmills. Gait and Posture, 49, 120-126. https://doi.org/10.1016/j.gaitpost.2016.06.037

Purpose To examine tibial acceleration and muscle activation during overground (OG), motorised treadmill (MT) and non-motorised treadmill conditions (NMT) when walking, jogging and running at matched velocities. Methods An accelerometer recorded acce... Read More about Tibial impacts and muscle activation during walking, jogging and running when performed overground, and on motorised and non-motorised treadmills.

Integrated oxyfuel power plant with improved CO2 separation and compression technology for EOR application (2016)
Journal Article
Font-Palma, C., Errey, O., Corden, C., Chalmers, H., Lucquiaud, M., Sanchez del Rio, M., Jackson, S., Medcalf, D., Livesey, B., Gibbins, J., & Pourkashanian, M. (2016). Integrated oxyfuel power plant with improved CO2 separation and compression technology for EOR application. Process Safety and Environmental Protection, 103(Part B), 455-465. https://doi.org/10.1016/j.psep.2016.06.024

An integrated advanced supercritical coal-fired oxyfuel power plant with a novel cryogenic CO2 separation and compression technology for high purity CO2 to suit injection for Enhanced Oil Recovery purposes is investigated. The full process is modelle... Read More about Integrated oxyfuel power plant with improved CO2 separation and compression technology for EOR application.

Numerical modeling of shape and topology optimisation of a piezoelectric cantilever beam in an energy-harvesting sensor (2016)
Journal Article
Thein, C. K., & Liu, J.-S. (2017). Numerical modeling of shape and topology optimisation of a piezoelectric cantilever beam in an energy-harvesting sensor. Engineering with Computers, 33(1), 137-148. https://doi.org/10.1007/s00366-016-0460-3

Piezoelectric materials are excellent transducers for converting mechanical energy from the environment for use as electrical energy. The conversion of mechanical energy to electrical energy is a key component in the development of self-powered devic... Read More about Numerical modeling of shape and topology optimisation of a piezoelectric cantilever beam in an energy-harvesting sensor.

Study of pyridine-mediated electrochemical reduction of CO2 to methanol at high CO2 pressure (2016)
Journal Article
Haywood, S. K., Rybchenko, S. I., Touhami, D., & Wadhawan, J. D. (2016). Study of pyridine-mediated electrochemical reduction of CO2 to methanol at high CO2 pressure. ChemSusChem, 9(13), 1660-1669. https://doi.org/10.1002/cssc.201600267

© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim The recently proposed highly efficient route of pyridine-catalyzed CO 2 reduction to methanol was explored on platinum electrodes at high CO 2 pressure. At 55 bar (5.5 MPa) of CO 2 , the bulk elec... Read More about Study of pyridine-mediated electrochemical reduction of CO2 to methanol at high CO2 pressure.

Numerical investigation of the energy performance of a guideless irregular heat and mass exchanger with corrugated heat transfer surface for dew point cooling (2016)
Journal Article
Diallo, T. M. O., Fancey, K., Ma, X., Xu, P., Zhao, X., Chen, H., & Li, D. (2016). Numerical investigation of the energy performance of a guideless irregular heat and mass exchanger with corrugated heat transfer surface for dew point cooling. Energy, 109, 803-817. https://doi.org/10.1016/j.energy.2016.05.062

© 2016 The Author(s) The paper presents an investigation into the energy performance of a novel irregular heat and mass exchanger for dew point cooling which, compared to the existing flat-plate heat exchangers, removed the use of the channel support... Read More about Numerical investigation of the energy performance of a guideless irregular heat and mass exchanger with corrugated heat transfer surface for dew point cooling.

Viscoelastically prestressed polymeric matrix composites: An overview (2016)
Journal Article
Fancey, K. S. (2016). Viscoelastically prestressed polymeric matrix composites: An overview. Journal of Reinforced Plastics and Composites, 35(17), 1290-1301. https://doi.org/10.1177/0731684416649036

Elastically prestressed polymeric matrix composites exploit the principles of prestressed concrete, i.e. fibres are stretched elastically during matrix curing. On matrix solidification, compressive stresses are created within the matrix, counterbalan... Read More about Viscoelastically prestressed polymeric matrix composites: An overview.

Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach (2016)
Journal Article
Poggio, D., Walker, M., Nimmo, W., Ma, L., & Pourkashanian, M. (2016). Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach. Waste Management, 53, 40-54. https://doi.org/10.1016/j.wasman.2016.04.024

This work proposes a novel and rigorous substrate characterisation methodology to be used with ADM1 to simulate the anaerobic digestion of solid organic waste. The proposed method uses data from both direct substrate analysis and the methane producti... Read More about Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach.