Skip to main content

Research Repository

Advanced Search

Outputs (14)

Process characteristics and products of olive kernel high temperature steam gasification (HTSG) (2008)
Journal Article
Skoulou, V., Swiderski, A., Yang, W., & Zabaniotou, A. (2009). Process characteristics and products of olive kernel high temperature steam gasification (HTSG). Bioresource technology : biomass, bioenergy, biowastes, conversion technologies, biotransformations, production technologies, 100(8), 2444-2451. https://doi.org/10.1016/j.biortech.2008.11.021

Exploitation of olive kernel for bioenergy production, with respect to the green house gases (GHGs) mitigation, is the main aim of this work. In this study, olive kernels were used as a solid biofuel, and high temperature steam gasification (HTSG) wa... Read More about Process characteristics and products of olive kernel high temperature steam gasification (HTSG).

Dynamic modelling of CO2 absorption for post combustion capture in coal-fired power plants (2008)
Journal Article
Lawal, A., Wang, M., Stephenson, P., & Yeung, H. (2009). Dynamic modelling of CO2 absorption for post combustion capture in coal-fired power plants. Fuel, 88(12), 2455-2462. https://doi.org/10.1016/j.fuel.2008.11.009

Power generation from fossil fuel-fired power plants is the largest single source of CO 2 emissions. Post combustion capture via chemical absorption is viewed as the most mature CO 2 capture technique. This paper presents a study of the post combusti... Read More about Dynamic modelling of CO2 absorption for post combustion capture in coal-fired power plants.

Simulation and static measurement of the gas volume fraction in a separated flow model using a conductance multiphase Venturi meter (CMVM) (2008)
Presentation / Conference Contribution
Hasan, A., & Lucas, G. (2008, November). Simulation and static measurement of the gas volume fraction in a separated flow model using a conductance multiphase Venturi meter (CMVM). Presented at Proceedings of the Computing and Engineering Annual Researchers’ Conference, Huddersfield, UK

The assumption of equal mixture densities at the inlet and the throat of the Venturi is only valid in a homogenous flow. This assumption is no longer valid for a separated flow and therefore, the measurement of the gas volume fraction at the throat m... Read More about Simulation and static measurement of the gas volume fraction in a separated flow model using a conductance multiphase Venturi meter (CMVM).

Effect of multi-walled carbon nanotubes on mechanical properties of feldspar filled polypropylene composites (2008)
Journal Article
Ansari, M. N., Ismail, H., & Zein, S. H. (2009). Effect of multi-walled carbon nanotubes on mechanical properties of feldspar filled polypropylene composites. Journal of Reinforced Plastics and Composites, 28(20), 2473-2485. https://doi.org/10.1177/0731684408092377

In this study, the effect of multi-walled carbon nanotube (MWCNT) reinforcement on mechanical and morphological properties of MWCNT reinforced feldspar/polypropylene composites was investigated. The composites were compounded in a Polydrive Thermo Ha... Read More about Effect of multi-walled carbon nanotubes on mechanical properties of feldspar filled polypropylene composites.

Low temperature gasification of olive kernels in a 5-kW fluidized bed reactor for H2-rich producer gas (2008)
Journal Article
Skoulou, V., Koufodimos, G., Samaras, Z., & Zabaniotou, A. (2008). Low temperature gasification of olive kernels in a 5-kW fluidized bed reactor for H2-rich producer gas. International Journal of Hydrogen Energy, 33(22), 6515-6524. https://doi.org/10.1016/j.ijhydene.2008.07.074

Air gasification of olive kernels in a 5 kW bench scale, bubbling fluidized bed gasifier, aimed at H 2 enrichment of the producer gas, was the target of this study. The effects of reactor temperature (T = 750-850 °C) and equivalence ratio (ER = 0.2-0... Read More about Low temperature gasification of olive kernels in a 5-kW fluidized bed reactor for H2-rich producer gas.

Anion-dependent micelle formation using electro-generated ferrocene surfactants (2008)
Journal Article
Evans, L. A., Apreutesei, D., Mehl, G., & Wadhawan, J. (2008). Anion-dependent micelle formation using electro-generated ferrocene surfactants. Electrochemistry communications, 10(11), 1720-1723. https://doi.org/10.1016/j.elecom.2008.08.046

The syntheses and characterization of two ferrocene oils, 4-octyloxy-2-{5-[1,1,3,3-tetramethyl-3-(11-oxo-11-ferrocenyl-undecyl)-disiloxanyl]-pentyloxy}-benzoic acid 4'-undecyloxy-biphenyl-4-yl ester, Fc1SiM and an octakis(ferrocene) species, Fc8Si8M'... Read More about Anion-dependent micelle formation using electro-generated ferrocene surfactants.

New insights into biological influence on the geochemistry of freshwater carbonate deposits (2008)
Journal Article
Rogerson, M., Pedley, H. M., Wadhawan, J. D., & Middleton, R. (2008). New insights into biological influence on the geochemistry of freshwater carbonate deposits. Geochimica et cosmochimica acta, 72(20), 4976-4987. https://doi.org/10.1016/j.gca.2008.06.030

Ambient temperature freshwater carbonates ("tufas") have outstanding potential as palaeoclimate archives. However, it has proven difficult to constrain the behaviour of the geochemical parameters on which important proxy systems rely. Current thinkin... Read More about New insights into biological influence on the geochemistry of freshwater carbonate deposits.

N-N bond cleavage in N-nitrosoarylamines (2008)
Journal Article
Evans, L. A., Petrovic, M., Antonijevic, M., Wiles, C., Watts, P., & Wadhawan, J. (2008). N-N bond cleavage in N-nitrosoarylamines. Journal of physical chemistry. C, 112(33), 12928-12935. https://doi.org/10.1021/jp710473a

The rupture of N-N bonds in three specific N-nitrosoarylamines (N,N'-dimethyl-N,N-dinitroso-para-phenylenediamine, Cupferron, and N-nitrosodiphenylamine) upon electrochemical oxidation in acetonitrile solution is investigated. In two cases, viz., Cup... Read More about N-N bond cleavage in N-nitrosoarylamines.

Synthesis and characterization of TiO2 coated multiwalled carbon nanotubes using a sol gel method (2008)
Journal Article
Sharif Zein, S. H., & Boccaccini, A. R. (2008). Synthesis and characterization of TiO2 coated multiwalled carbon nanotubes using a sol gel method. Industrial & engineering chemistry research, 47(17), 6598-6606. https://doi.org/10.1021/ie701770q

A considerable improvement in the quality of TiO 2 coatings on multiwalled carbon nanotubes (MWNTs) was obtained by introducing a three-step purification and functionalization process which combines oxidation in air followed by sulfuric acid refluxe... Read More about Synthesis and characterization of TiO2 coated multiwalled carbon nanotubes using a sol gel method.

Reaction between L-cysteine and 10-methylphenothiazine cation radical released from droplet-modified electrodes (2008)
Journal Article
Horn, J. J., Watson, A., Lewis, M., McCreedy, T., & Wadhawan, J. D. (2008). Reaction between L-cysteine and 10-methylphenothiazine cation radical released from droplet-modified electrodes. Electrochemistry communications, 10(9), 1384-1387. https://doi.org/10.1016/j.elecom.2008.07.021

The electrochemical oxidation of 10-methylphenothiazine (PMe) dissolved in 1,2-trans-dibromocyclohexane oil droplets immobilised on a basal plane pyrolytic graphite (BPPG) electrode and bathed by an aqueous electrolyte is a one-electron quasi-reversi... Read More about Reaction between L-cysteine and 10-methylphenothiazine cation radical released from droplet-modified electrodes.