Skip to main content

Research Repository

Advanced Search

Study on heat integration of supercritical coal-fired power plant with post-combustion CO₂ capture process through process simulation

Liu, Xiaoyan; Chen, Jian; Luo, Xiaobo; Wang, Meihong; Meng, Hui

Authors

Xiaoyan Liu

Jian Chen

Xiaobo Luo

Meihong Wang

Hui Meng



Abstract

Coal-fired power plant (CFPP) is one of the main sources of anthropogenic CO₂ emissions. Capturing CO₂ from CFPP by post-combustion process plays an important role to mitigate CO₂ emissions. However, a significant thermal efficiency drop was observed when integrating CFPP with post-combustion carbon capture (PCC) process due to the steam extraction for capture solvent regeneration. Thus research efforts are required to decrease this energy penalty. In this study, a steady state model for 600 MWe supercritical CFPP was developed as a reference case with a low heating value (LHV) based efficiency of 41.6%. A steady state model for MEA-based PCC process was also developed and scaled up to match the capacity of the CFPP. CO₂ compression process was simulated to give an accurate prediction of its electricity consumption and cooling requirement. Different integration cases were set up according to different positions of steam extraction from the CFPP. The results show that the efficiency penalty is 12.29% and 14.9% when steam was extracted at 3.64 bar and at 9.1 bar respectively. Obvious improvements were achieved by utilizing waste heat from CO₂ capture and compression process, taking part of low pressure cylinders out of service, and adding an auxiliary turbine to decompress the extracted steam. The efficiency penalty of the best case decreases to 9.75%. This study indicates that comprehensive heat integrations can significantly improve the overall energy efficiency when the CFPP is integrated with PCC and compression process.

Citation

Liu, X., Chen, J., Luo, X., Wang, M., & Meng, H. (2015). Study on heat integration of supercritical coal-fired power plant with post-combustion CO₂ capture process through process simulation. Fuel, 158(October), 625-633. https://doi.org/10.1016/j.fuel.2015.06.033

Journal Article Type Article
Acceptance Date Jun 9, 2015
Online Publication Date Jun 15, 2015
Publication Date Oct 15, 2015
Deposit Date Jun 18, 2015
Publicly Available Date Mar 29, 2024
Journal Fuel
Print ISSN 0016-2361
Electronic ISSN 1873-7153
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 158
Issue October
Pages 625-633
DOI https://doi.org/10.1016/j.fuel.2015.06.033
Keywords Process simulation; Heat integration; Supercritical coal-fired power plant; Post-combustion CO₂ capture; CO₂ compression; Energy penalty
Public URL https://hull-repository.worktribe.com/output/375581
Publisher URL http://www.sciencedirect.com/science/article/pii/S0016236115006134
Additional Information This is the author's accepted manuscript of an article which has been published in: Fuel, 2015, v.158, October at http://www.sciencedirect.com/science/article/pii/S0016236115006134

Files





Downloadable Citations