All Outputs (531)

Plasmonic nanostructures to enhance catalytic performance of zeolites under visible light (2014)
Journal Article
Zhang, X., Ke, X., Du, A., & Zhu, H. (2014). Plasmonic nanostructures to enhance catalytic performance of zeolites under visible light. Scientific reports, 4(1), Article 3805. https://doi.org/10.1038/srep03805

Light absorption efficiency of heterogeneous catalysts has restricted their photocatalytic capability for commercially important organic synthesis. Here, we report a way of harvesting visible light efficiently to boost zeolite catalysis by means of p... Read More about Plasmonic nanostructures to enhance catalytic performance of zeolites under visible light.

Techno-economic analysis of a CO₂ capture plant integrated with a commercial scale combined cycle gas turbine (CCGT) power plant (2014)
Journal Article
Canepa, R., & Wang, M. (2015). Techno-economic analysis of a CO₂ capture plant integrated with a commercial scale combined cycle gas turbine (CCGT) power plant. Applied thermal engineering, 74(January), 10-19. https://doi.org/10.1016/j.applthermaleng.2014.01.014

In this study, a combined cycle gas turbine (CCGT) power plant and a CO₂ capture plant have been modelled in GateCycle® and in Aspen Plus® environments respectively. The capture plant model is validated with experimental data from the pilot plant at... Read More about Techno-economic analysis of a CO₂ capture plant integrated with a commercial scale combined cycle gas turbine (CCGT) power plant.

Efficient compact micro DBD plasma reactor for ozone generation for industrial application in liquid and gas phase systems (2014)
Journal Article
Kuvshinov, D., Lozano-Parada, J., Siswanto, A., & Zimmerman, W. (2014). Efficient compact micro DBD plasma reactor for ozone generation for industrial application in liquid and gas phase systems. International journal of chemical, molecular, nuclear, materials and metallurgical engineering, 8(1), 80-83. https://doi.org/10.5281/zenodo.1090542

Ozone is well known as a powerful, fast reacting oxidant. Ozone based processes produce no by-product residual as non-reacted ozone decomposes to molecular oxygen. Therefore an application of ozone is widely accepted as one of the main approaches for... Read More about Efficient compact micro DBD plasma reactor for ozone generation for industrial application in liquid and gas phase systems.

The effects of cervical muscle fatigue on balance - A study with elite amateur rugby league players (2014)
Journal Article
Gosselin, G., & Fagan, M. J. (2014). The effects of cervical muscle fatigue on balance - A study with elite amateur rugby league players. Journal of sports science & medicine, 13(2), 329-337

Neck muscle fatigue has been shown to alter an individual’s balance in a similar way to that reported in subjects suffering from neck pain or subjects that have suffered a neck injury. The main purpose of the present study was to quantify the effects... Read More about The effects of cervical muscle fatigue on balance - A study with elite amateur rugby league players.

Recent Developments in Catalytic Micro Process Engineering for Fine Chemicals Synthesis (2013)
Journal Article
Escriba, M., & Ibhadon, A. (2013). Recent Developments in Catalytic Micro Process Engineering for Fine Chemicals Synthesis. Recent Patents on Catalysis, 2(2), 101-115. https://doi.org/10.2174/2211548x113029990006

In this review, recent developments in fine chemicals synthesis, catalysis, microreactor design and applications are discussed. Specifically, new advances in continuous micro process engineering, packed-bed devices and photoreactors are discussed to... Read More about Recent Developments in Catalytic Micro Process Engineering for Fine Chemicals Synthesis.

A slot-loaded reduced-size CPW-fed aperture antenna for UWB applications (2013)
Presentation / Conference Contribution
Zolfaghari, M., Riley, N. G., Mahdawi, M., & Shen, J. (2013, November). A slot-loaded reduced-size CPW-fed aperture antenna for UWB applications. Presented at 2013 Loughborough Antennas and Propagation Conference, LAPC 2013

The paper presents a co-planar wave guide (CPW)-fed slot loaded low return loss planar printed antenna with a small size designed for wireless communication and UWB applications. First, a conventional UWB antenna is modeled to provide a reference poi... Read More about A slot-loaded reduced-size CPW-fed aperture antenna for UWB applications.

The exploitation of biomass for building space heating in Greece: Energy, environmental and economic considerations (2013)
Journal Article
Michopoulos, A., Skoulou, V., Voulgari, V., Tsikaloudaki, A., & Kyriakis, N. A. (2014). The exploitation of biomass for building space heating in Greece: Energy, environmental and economic considerations. Energy Conversion and Management, 78, 276-285. https://doi.org/10.1016/j.enconman.2013.10.055

The exploitation of forest and agricultural biomass residues for energy production may offer significant advantages to the energy policy of the relevant country, but it strongly depends on a number of financial, technological and political factors. T... Read More about The exploitation of biomass for building space heating in Greece: Energy, environmental and economic considerations.

Case study on CO₂ transport pipeline network design for Humber region in the UK (2013)
Journal Article
Lazic, T., Oko, E., & Wang, M. (2014). Case study on CO₂ transport pipeline network design for Humber region in the UK. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 228(3), 210-225. https://doi.org/10.1177/0954408913500447

Reliable, safe and economic CO₂ transport from CO₂ capture points to long term storage/enhanced oil recovery (EOR) sites is critical for commercial deployment of carbon capture and storage (CCS) technology. Pipeline transportation of CO₂ is considere... Read More about Case study on CO₂ transport pipeline network design for Humber region in the UK.

A cellulose acetate/multi-walled carbon nanotube mixed matrix membrane for CO2/N2separation (2013)
Journal Article
Ahmad, A. L., Jawad, Z. A., Low, S. C., & Zein, S. H. (2014). A cellulose acetate/multi-walled carbon nanotube mixed matrix membrane for CO2/N2separation. Journal of membrane science, 451, 55-66. https://doi.org/10.1016/j.memsci.2013.09.043

Carbon dioxide (CO 2 ) emissions have been rising indiscriminately and are becoming a major contributor to Earth's greenhouse effect. One of the most promising means of separating the hazardous CO 2 gas is to develop a cost effective and high-perform... Read More about A cellulose acetate/multi-walled carbon nanotube mixed matrix membrane for CO2/N2separation.

Thermal modelling of the cathode in air-breathing PEM fuel cells (2013)
Journal Article
Ismail, M. S., Ingham, D. B., Hughes, K. J., Ma, L., & Pourkashanian, M. (2013). Thermal modelling of the cathode in air-breathing PEM fuel cells. Applied energy, 111, 529-537. https://doi.org/10.1016/j.apenergy.2013.05.007

A thermal two-dimensional model has been built for an air-breathing proton exchange membrane (PEM) fuel cell that has been reported in the literature. The objective of the study is to investigate the thermal situation over the cathode surface of the... Read More about Thermal modelling of the cathode in air-breathing PEM fuel cells.

Facile Synthesis of Silver Nanoparticles by Chemical Reduction Route (2013)
Journal Article
Ratnamalar, R., Mariatti, M., Ahmad, Z., & Zein, S. (2013). Facile Synthesis of Silver Nanoparticles by Chemical Reduction Route. Materials Science Forum, 756, 99-105. https://doi.org/10.4028/www.scientific.net/msf.756.99

This work reports a simple chemical reduction route for the preparation of uniformed Ag nanoparticles whereby a fine control over the sizes of the Ag nanoparticles was studied by varying the concentrations of the reducing agents used. In characteriza... Read More about Facile Synthesis of Silver Nanoparticles by Chemical Reduction Route.

The in-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly in proton exchange membrane fuel cells (2013)
Journal Article
Alhazmi, N., Ismail, M. S., Ingham, D. B., Hughes, K. J., Ma, L., & Pourkashanian, M. (2013). The in-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly in proton exchange membrane fuel cells. Journal of power sources, 241, 136-145. https://doi.org/10.1016/j.jpowsour.2013.04.100

Understanding the thermal properties of the materials which are used in a proton exchange membrane fuel cell (PEM) is essential for the thermal management of a PEM fuel cell and consequently for improving its performance. In this paper, the parallel... Read More about The in-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly in proton exchange membrane fuel cells.

Nanophase Hydroxyapatite as a biomaterial in advanced hard tissue engineering: A review (2013)
Journal Article
Zakaria, S. M., Sharif Zein, S. H., Othman, M. R., Yang, F., & Jansen, J. A. (2013). Nanophase Hydroxyapatite as a biomaterial in advanced hard tissue engineering: A review. Tissue Engineering: Parts A, B, and C, 19(5), 431-441. https://doi.org/10.1089/ten.teb.2012.0624

Hydroxyapatite is a biocompatible material that is extensively used in the replacement and regeneration of bone material. In nature, nanostructured hydroxyapatite is the main component present in hard body tissues. Hence, the state of the art in nano... Read More about Nanophase Hydroxyapatite as a biomaterial in advanced hard tissue engineering: A review.

Heterogeneous photocatalysis: Recent advances and applications (2013)
Journal Article
Ibhadon, A. O., & Fitzpatrick, P. (2013). Heterogeneous photocatalysis: Recent advances and applications. Catalysts, 3(1), 189-218. https://doi.org/10.3390/catal3010189

Semiconductor heterogeneous photocatalysis, the subject of this review, is a versatile, low-cost and environmentally benign treatment technology for a host of pollutants. These may be of biological, organic and inorganic in origin within water and ai... Read More about Heterogeneous photocatalysis: Recent advances and applications.

Comparison of the pervaporation performance of various types of carbon nanotube-based nanocomposites in the dehydration of acetone (2013)
Journal Article
Yeang, Q. W., Zein, S. H. S., Sulong, A. B., & Tan, S. H. (2013). Comparison of the pervaporation performance of various types of carbon nanotube-based nanocomposites in the dehydration of acetone. Separation and purification technology, 107, 252-263. https://doi.org/10.1016/j.seppur.2013.01.031

The present work focuses on the functionalisation of multi-walled carbon nanotubes (MWCNTs) with poly(vinyl alcohol) (PVA) in order to improve the compatibility and dispersion of MWCNTs in a chitosan (CS) matrix. The resultant PVA-MWCNT/CS nanocompos... Read More about Comparison of the pervaporation performance of various types of carbon nanotube-based nanocomposites in the dehydration of acetone.

The Functionalization of Beta-Cyclodextrins on Multi Walled Carbon Nanotubes: Effects of the Dispersant and Non Aqueous Media (2013)
Journal Article
Latif Ahmad, A., Abbas Jawad, Z., Chun Low, S., & Hussein Sharif Zein, S. (2013). The Functionalization of Beta-Cyclodextrins on Multi Walled Carbon Nanotubes: Effects of the Dispersant and Non Aqueous Media. Current nanoscience, 9(1), 93-102. https://doi.org/10.2174/1573413711309010015

Sidewall functionalization by chemical agents can improve the dispersion of carbon nanotubes (CNTs), but the improvement is at the expense of their properties and structure. An environmentally friendly dispersant, cyclodextrins (CD), was revealed as... Read More about The Functionalization of Beta-Cyclodextrins on Multi Walled Carbon Nanotubes: Effects of the Dispersant and Non Aqueous Media.

Effect of vibration after filling on mechanical reliability in thin wall investment casting with fillability filling regime—part 1 (2013)
Journal Article
Abdul-Karem, W., Green, N., Al-Raheem, K. F., & Hasan, A. H. A. (2013). Effect of vibration after filling on mechanical reliability in thin wall investment casting with fillability filling regime—part 1. International Journal of Advanced Manufacturing Technology, 67(9-12), 2075-2082. https://doi.org/10.1007/s00170-012-4632-z

A vibration technique is used in this study to explore the effect of low frequency vibration on the mechanical reliability of Al-7Si-Mg castings. The quality of castings is related to the number and the size of porosity and oxide film in thin wall in... Read More about Effect of vibration after filling on mechanical reliability in thin wall investment casting with fillability filling regime—part 1.

Empowering the smart grid: Can redox batteries be matched to renewable energy systems for energy storage? (2013)
Journal Article
Halls, J. E., Hawthornthwaite, A., Hepworth, R. J., Roberts, N. A., Wright, K. J., Zhou, Y., Haswell, S. J., Haywood, S. K., Kelly, S. M., Lawrence, N. S., & Wadhawan, J. D. (2013). Empowering the smart grid: Can redox batteries be matched to renewable energy systems for energy storage?. Energy & environmental science, 6(3), 1026-1041. https://doi.org/10.1039/c3ee23708g

The charging of an undivided cerium-zinc redox battery by various current waveforms some of which mimic the output of renewable energy (solar, wind, tidal, biofuel burning) to electricity transducers is considered in this work, where the battery oper... Read More about Empowering the smart grid: Can redox batteries be matched to renewable energy systems for energy storage?.

The functionalization of beta-cyclodextrins on multi walled carbon nanotubes: Effects of the dispersant and non aqueous media (2013)
Journal Article
Ahmad, A. L., Jawad, Z. A., Low, S. C., & Sharif Zein, S. H. (2013). The functionalization of beta-cyclodextrins on multi walled carbon nanotubes: Effects of the dispersant and non aqueous media. Current nanoscience, 9(1), 93-102. https://doi.org/10.2174/157341313805117839

Sidewall functionalization by chemical agents can improve the dispersion of carbon nanotubes (CNTs), but the improvement is at the expense of their properties and structure. An environmentally friendly dispersant, cyclodextrins (CD), was revealed as... Read More about The functionalization of beta-cyclodextrins on multi walled carbon nanotubes: Effects of the dispersant and non aqueous media.

Photogalvanic cells based on lyotropic nanosystems: towards the use of liquid nanotechnology for personalised energy sources (2012)
Journal Article
Halls, J. E., & Wadhawan, J. D. (2012). Photogalvanic cells based on lyotropic nanosystems: towards the use of liquid nanotechnology for personalised energy sources. Energy & environmental science, 5(4), 6541-6551. https://doi.org/10.1039/c2ee03169h

A lightweight, autonomous and practical, proof-of-concept electrical power source is developed within this work. It comprises a photoredox-active material embedded within the non-ionic surfactant subphase, with a second redox reagent present within t... Read More about Photogalvanic cells based on lyotropic nanosystems: towards the use of liquid nanotechnology for personalised energy sources.