Skip to main content

Research Repository

Advanced Search

All Outputs (79)

Dental morphology and mechanical efficiency during development in a hard object feeding primate (Cercoebus atys) (2016)
Thesis
Swan, K. R. Dental morphology and mechanical efficiency during development in a hard object feeding primate (Cercoebus atys). (Thesis). Hull York Medical School, the University of Hull and the University of York. https://hull-repository.worktribe.com/output/4218539

Teeth play a prominent role in food acquisition and processing by providing the working surfaces to initiate and propagate fracture. Variation in the shape and size of teeth has therefore naturally been associated with various dietary adaptations. Ho... Read More about Dental morphology and mechanical efficiency during development in a hard object feeding primate (Cercoebus atys).

Experimental investigation of the energy performance of a novel Micro-encapsulated Phase Change Material (MPCM) slurry based PV/T system (2016)
Journal Article
Qiu, Z., Ma, X., Zhao, X., Li, P., & Ali, S. (2016). Experimental investigation of the energy performance of a novel Micro-encapsulated Phase Change Material (MPCM) slurry based PV/T system. Applied energy, 165, 260-271. https://doi.org/10.1016/j.apenergy.2015.11.053

© 2015 Elsevier Ltd. As a follow-on work of the authors' theoretical study, the paper presented an experimental investigation into the energy performance of a novel PV/T thermal and power system employing the Micro-encapsulated Phase Change Material... Read More about Experimental investigation of the energy performance of a novel Micro-encapsulated Phase Change Material (MPCM) slurry based PV/T system.

Robust fault estimation using an LPV reference model : ADDSAFE benchmark case study (2015)
Journal Article
Chen, L., Patton, R., & Goupil, P. (2016). Robust fault estimation using an LPV reference model : ADDSAFE benchmark case study. Control engineering practice, 49, 194-203. https://doi.org/10.1016/j.conengprac.2015.12.006

This paper investigates a mixed H−/H∞ linear parameter varying (LPV) fault estimator using an LPV reference estimator. LMIs are used to calculate the affine parameter-dependent gains of the LPV fault estimator. The design strategy is applied to a hig... Read More about Robust fault estimation using an LPV reference model : ADDSAFE benchmark case study.

Intracranial pressure changes during mouse development (2015)
Journal Article
Moazen, M., Alazmani, A., Rafferty, K., Liu, Z.-J., Gustafson, J., Cunningham, M. L., Fagan, M. J., & Herring, S. W. (2016). Intracranial pressure changes during mouse development. Journal of biomechanics, 49(1), 123-126. https://doi.org/10.1016/j.jbiomech.2015.11.012

During early stages of postnatal development, pressure from the growing brain as well as cerebrospinal fluid, i.e. intracranial pressure (ICP), load the calvarial bones. It is likely that such loading contributes to the peripheral bone formation at t... Read More about Intracranial pressure changes during mouse development.

Validity and sensitivity of a human cranial finite element model: Implications for comparative studies of biting performance (2015)
Journal Article
Toro-Ibacache, V., Fitton, L. C., Fagan, M. J., & O'Higgins, P. (2016). Validity and sensitivity of a human cranial finite element model: Implications for comparative studies of biting performance. Journal of anatomy, 228(1), 70-84. https://doi.org/10.1111/joa.12384

Finite element analysis (FEA) is a modelling technique increasingly used in anatomical studies investigating skeletal form and function. In the case of the cranium this approach has been applied to both living and fossil taxa to (for example) investi... Read More about Validity and sensitivity of a human cranial finite element model: Implications for comparative studies of biting performance.

Prediction of annual joint rain fade on EHF networks by weighted rain field selection (2015)
Journal Article
Paulson, K. S., & Chinda, I. D. (2015). Prediction of annual joint rain fade on EHF networks by weighted rain field selection. Radio science, 50(8), 827-836. https://doi.org/10.1002/2015RS005695

©2015. American Geophysical Union. All Rights Reserved. We present a computationally efficient method to predict joint rain fade on arbitrary networks of microwave links. Methods based on synthetic rain fields composed of a superposition of rain cell... Read More about Prediction of annual joint rain fade on EHF networks by weighted rain field selection.

In situ ultrafast synchrotron x-ray imaging studies of the dynamics of ultrasonic bubbles in liquids (2015)
Thesis
Tan, D. In situ ultrafast synchrotron x-ray imaging studies of the dynamics of ultrasonic bubbles in liquids. (Thesis). University of Hull. https://hull-repository.worktribe.com/output/4217504

The research studies the highly dynamic and transient behaviour of ultrasonic bubbles in liquids of different physical properties, including water, silicone oil, and liquid metals. A novel ultrasound solidification apparatus as well as the special sa... Read More about In situ ultrafast synchrotron x-ray imaging studies of the dynamics of ultrasonic bubbles in liquids.

Biodiesel from microalgae : the use of multi-criteria decision analysis for strain selection (2015)
Journal Article
Nwokoagbara, E., Olaleye, A. K., & Wang, M. (2015). Biodiesel from microalgae : the use of multi-criteria decision analysis for strain selection. Fuel, 159, 241-249. https://doi.org/10.1016/j.fuel.2015.06.074

Microalgae strain selection is a vital step in the production of biodiesel from microalgae. In this study, Multi-Criteria Decision Analysis (MCDA) methodologies are adopted to resolve this problem. The aim of this study is to identify the best microa... Read More about Biodiesel from microalgae : the use of multi-criteria decision analysis for strain selection.

Active Solar Thermal Facades (ASTFs): From concept, application to research questions (2015)
Journal Article
Zhang, X., Shen, J., Lu, Y., He, W., Xu, P., Zhao, X., Qiu, Z., Zhu, Z., Zhou, J., & Dong, X. (2015). Active Solar Thermal Facades (ASTFs): From concept, application to research questions. Renewable & sustainable energy reviews, 50, 32-63. https://doi.org/10.1016/j.rser.2015.04.108

© 2015 Elsevier Ltd. All rights reserved. The aim of the paper is to report a comprehensive review into a recently emerging building integrated solar thermal technology, namely, Active Solar Thermal Facades (ASTFs), in terms of concept, classificatio... Read More about Active Solar Thermal Facades (ASTFs): From concept, application to research questions.

Mechanical properties of calvarial bones in a mouse model for craniosynostosis (2015)
Journal Article
Moazen, M., Peskett, E., Babbs, C., Pauws, E., & Fagan, M. J. (2015). Mechanical properties of calvarial bones in a mouse model for craniosynostosis. PLoS ONE, 10(5), e0125757. https://doi.org/10.1371/journal.pone.0125757

The mammalian cranial vault largely consists of five flat bones that are joined together along their edges by soft fibrous tissues called sutures. Premature closure of the cranial sutures, craniosynostosis, can lead to serious clinical pathology unle... Read More about Mechanical properties of calvarial bones in a mouse model for craniosynostosis.

Steady state simulation and exergy analysis of supercritical coal-fired power plant with CO₂ capture (2015)
Journal Article
Olaleye, A. K., Wang, M., & Kelsall, G. (2015). Steady state simulation and exergy analysis of supercritical coal-fired power plant with CO₂ capture. Fuel, 151, 57-72. https://doi.org/10.1016/j.fuel.2015.01.013

Integrating a power plant with CO₂ capture incurs serious efficiency and energy penalty due to use of energy for solvent regeneration in the capture process. Reducing the exergy destruction and losses associated with the power plant systems can impro... Read More about Steady state simulation and exergy analysis of supercritical coal-fired power plant with CO₂ capture.

Parallel experimental study of a novel super-thin thermal absorber based photovoltaic/thermal (PV/T) system against conventional photovoltaic (PV) system (2015)
Journal Article
Xu, P., Zhang, X., Shen, J., Zhao, X., He, W., & Li, D. (2015). Parallel experimental study of a novel super-thin thermal absorber based photovoltaic/thermal (PV/T) system against conventional photovoltaic (PV) system. Energy Reports, 1, 30-35. https://doi.org/10.1016/j.egyr.2014.11.002

Photovoltaic (PV) semiconductor degrades in performance due to temperature rise. A super thin-conductive thermal absorber is therefore developed to regulate the PV working temperature by retrofitting the existing PV panel into the photovoltaic/therma... Read More about Parallel experimental study of a novel super-thin thermal absorber based photovoltaic/thermal (PV/T) system against conventional photovoltaic (PV) system.

In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures (2014)
Journal Article
Mi, J., Tan, D., & Lee, T. L. (2015). In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures. Metallurgical and Materials Transactions B, 46(4), 1615-1619. https://doi.org/10.1007/s11663-014-0256-z

Considerable progress has been made in studying the mechanism and effectiveness of using ultrasound waves to manipulate the solidification microstructures of metallic alloys. However, uncertainties remain in both the underlying physics of how microst... Read More about In situ synchrotron x-ray study of ultrasound cavitation and its effect on solidification microstructures.

Comparative study of a novel liquid-vapour separator incorporated gravitational loop heat pipe against the conventional gravitational straight and loop heat pipes - Part I: Conceptual development and theoretical analyses (2014)
Journal Article
Zhang, X., Shen, J., He, W., Xu, P., Zhao, X., & Tan, J. (2015). Comparative study of a novel liquid-vapour separator incorporated gravitational loop heat pipe against the conventional gravitational straight and loop heat pipes - Part I: Conceptual development and theoretical analyses. Energy Conversion and Management, 90, 409-426. https://doi.org/10.1016/j.enconman.2014.11.041

Aim of the paper is to investigate the thermal performance of a novel liquid-vapour separator incorporated gravity-assisted loop heat pipe (GALHP) (T1), against a conventional GALHP (T2) and a gravitational straight heat pipe (T3), from the conceptua... Read More about Comparative study of a novel liquid-vapour separator incorporated gravitational loop heat pipe against the conventional gravitational straight and loop heat pipes - Part I: Conceptual development and theoretical analyses.

Simplification of detailed rate-based model of post-combustion CO₂ capture for full chain CCS integration studies (2014)
Journal Article
Oko, E., Wang, M., & Olaleye, A. K. (2015). Simplification of detailed rate-based model of post-combustion CO₂ capture for full chain CCS integration studies. Fuel, 142, 87-93. https://doi.org/10.1016/j.fuel.2014.10.083

As post-combustion CO₂ capture (PCC) technology nears commercialisation, it has become necessary for the full carbon capture and storage (CCS) chain to be studied for better understanding of its dynamic characteristics. Model-based approach is one op... Read More about Simplification of detailed rate-based model of post-combustion CO₂ capture for full chain CCS integration studies.

Experimental study, dynamic modelling, validation and analysis of hydrogen production from biomass pyrolysis/gasification of biomass in a two-stage fixed bed reaction system (2014)
Journal Article
Olaleye, A. K., Adedayo, K. J., Wu, C., Nahil, M. A., Wang, M., & Williams, P. T. (2014). Experimental study, dynamic modelling, validation and analysis of hydrogen production from biomass pyrolysis/gasification of biomass in a two-stage fixed bed reaction system. Fuel, 137, 364-374. https://doi.org/10.1016/j.fuel.2014.07.076

There is great interest in producing hydrogen from renewable sources such as biomass rather than from fossil fuels. This paper presents new experimental results at different pyrolysis temperature and development of a dynamic model for a biomass pyrol... Read More about Experimental study, dynamic modelling, validation and analysis of hydrogen production from biomass pyrolysis/gasification of biomass in a two-stage fixed bed reaction system.

Masticatory biomechanics in the rabbit: a multi-body dynamics analysis (2014)
Journal Article
Watson, P. J., Gröning, F., Curtis, N., Fitton, L. C., Herrel, A., McCormack, S. W., & Fagan, M. J. (2014). Masticatory biomechanics in the rabbit: a multi-body dynamics analysis. Journal of the Royal Society interface / the Royal Society, 11(99), Article 20140564. https://doi.org/10.1098/rsif.2014.0564

Multi-body dynamics is a powerful engineering tool which is becoming increasingly popular for the simulation and analysis of skull biomechanics. This paper presents the first application of multi-body dynamics to analyse the biomechanics of the rabbi... Read More about Masticatory biomechanics in the rabbit: a multi-body dynamics analysis.

The onset of plasticity of a Zr-based bulk metallic glass (2014)
Journal Article
Huang, Y., Khong, J. C., Connolley, T., & Mi, J. (2014). The onset of plasticity of a Zr-based bulk metallic glass. International Journal of Plasticity, 60, 87-100. https://doi.org/10.1016/j.ijplas.2014.05.003

The deformation behaviors of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glassy alloy under step-controlled tensile loads have been studied in situ and systematically using scanning electron microscopy and synchrotron X-ray diffraction. A circular h... Read More about The onset of plasticity of a Zr-based bulk metallic glass.

Theoretical investigation of the thermal performance of a novel solar loop-heat-pipe façade-based heat pump water heating system (2014)
Journal Article
He, W., Hong, X., Zhao, X., Zhang, X., Shen, J., & Ji, J. (2014). Theoretical investigation of the thermal performance of a novel solar loop-heat-pipe façade-based heat pump water heating system. Energy and Buildings, 77, 180-191. https://doi.org/10.1016/j.enbuild.2014.03.053

The aim of the paper was to present a dedicated theoretical investigation into the thermal performance of a novel solar loop-heat-pipe façade based heat pump water heating system. This involved thermo-fluid analyses, computer numerical model developm... Read More about Theoretical investigation of the thermal performance of a novel solar loop-heat-pipe façade-based heat pump water heating system.