All Outputs (338)

Experimental investigation on performance of fabrics for indirect evaporative cooling applications (2016)
Journal Article
Xu, P., Ma, X., Zhao, X., & Fancey, K. S. (2016). Experimental investigation on performance of fabrics for indirect evaporative cooling applications. Building and Environment, 110, 104-114. https://doi.org/10.1016/j.buildenv.2016.10.003

© 2016 Indirect evaporative cooling, by using water evaporation to absorb heat to lower the air temperature without adding moisture, is an extremely low energy and environmentally friendly cooling principle. The properties of the wet channel surface... Read More about Experimental investigation on performance of fabrics for indirect evaporative cooling applications.

A disposable microfluidic device with a screen printed electrode for mimicking phase II metabolism (2016)
Journal Article
Vasiliadou, R., Esfahani, M. M. N., Brown, N. J., & Welham, K. J. (2016). A disposable microfluidic device with a screen printed electrode for mimicking phase II metabolism. Sensors, 16(9), Article ARTN 1418. https://doi.org/10.3390/s16091418

Human metabolism is investigated using several in vitro methods. However, the current methodologies are often expensive, tedious and complicated. Over the last decade, the combination of electrochemistry (EC) with mass spectrometry (MS) has a simpler... Read More about A disposable microfluidic device with a screen printed electrode for mimicking phase II metabolism.

Experimental investigation of the performance of the novel HP-BIPV/T system for use in residential buildings (2016)
Journal Article
Zhao, X., Wang, Z., Wang, Z., Yang, W., & Zhang, J. (2016). Experimental investigation of the performance of the novel HP-BIPV/T system for use in residential buildings. Energy and Buildings, 130, 295-308. https://doi.org/10.1016/j.enbuild.2016.08.060

In this paper, the novel heat pipe building integrated photovoltaic/thermal system (HP-BIPV/T), designed for use in residential buildings in China, has been proposed with the composite of metal wires and phase change material (PCM) filling into the s... Read More about Experimental investigation of the performance of the novel HP-BIPV/T system for use in residential buildings.

Integrated design of fault-tolerant control for nonlinear systems based on fault estimation and T-S fuzzy modelling (2016)
Journal Article
Lan, J., & Patton, R. J. (2017). Integrated design of fault-tolerant control for nonlinear systems based on fault estimation and T-S fuzzy modelling. IEEE Transactions on Fuzzy Systems, 25(5), 1141-1154. https://doi.org/10.1109/tfuzz.2016.2598849

This paper proposes an integrated design of faulttolerant control (FTC) for nonlinear systems using Takagi-Sugeno (T-S) fuzzy models in the presence of modelling uncertainty along with actuator/sensor faults and external disturbance. An augmented sta... Read More about Integrated design of fault-tolerant control for nonlinear systems based on fault estimation and T-S fuzzy modelling.

Integrated fault estimation and fault-tolerant control for uncertain Lipschitz nonlinear systems (2016)
Journal Article
Lan, J., & Patton, R. J. (2017). Integrated fault estimation and fault-tolerant control for uncertain Lipschitz nonlinear systems. International journal of robust and nonlinear control, 27(5), 761-780. https://doi.org/10.1002/rnc.3597

This paper proposes an integrated fault estimation and fault-tolerant control (FTC) design for Lipschitz non-linear systems subject to uncertainty, disturbance, and actuator/sensor faults. A non-linear unknown input observer without rank requirement... Read More about Integrated fault estimation and fault-tolerant control for uncertain Lipschitz nonlinear systems.

A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid state (2016)
Journal Article
Wang, F., Eskin, D., Mi, J., Connolley, T., Lindsay, J., & Mounib, M. (2016). A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid state. Acta Materialia, 116, 354-363. https://doi.org/10.1016/j.actamat.2016.06.056

The mechanism underlying the considerable refinement of primary Al3Ti intermetallic particles induced by ultrasonic treatment (UST) in an Al-0.4 wt% Ti alloy in the fully liquid state was investigated. Scanning electron microscopy, energy dispersive... Read More about A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid state.

Sound transmission across a plenum window with an active noise cancellation system (2016)
Journal Article
Tang, S. K., Tong, Y. G., & Tsui, K. L. (2016). Sound transmission across a plenum window with an active noise cancellation system. Noise Control Engineering Journal, 64(4), 423-431. https://doi.org/10.3397/1/376390

A series of experiments was conducted in the present study in an attempt to understand how the implementation of active noise control would affect the sound transmission across a plenum window. A simple squared pressure control scheme with three erro... Read More about Sound transmission across a plenum window with an active noise cancellation system.

Monolith-based68Ga processing: A new strategy for purification to facilitate direct radiolabelling methods (2016)
Journal Article
He, P., Burke, B. P., Clemente, G. S., Brown, N., Pamme, N., & Archibald, S. J. (2016). Monolith-based68Ga processing: A new strategy for purification to facilitate direct radiolabelling methods. Reaction Chemistry and Engineering, 1(4), 361-365. https://doi.org/10.1039/c6re00081a

The post-processing of68Ga generator eluate by means of a novel high capacity cation-exchange silica monolith column has been validated in this work. Quantitative release of a purified68Ga solution in high concentration can be achieved using weak aci... Read More about Monolith-based68Ga processing: A new strategy for purification to facilitate direct radiolabelling methods.

Tibial impacts and muscle activation during walking, jogging and running when performed overground, and on motorised and non-motorised treadmills (2016)
Journal Article
Montgomery, G., Abt, G., Dobson, C., Smith, T., & Ditroilo, M. (2016). Tibial impacts and muscle activation during walking, jogging and running when performed overground, and on motorised and non-motorised treadmills. Gait and Posture, 49, 120-126. https://doi.org/10.1016/j.gaitpost.2016.06.037

Purpose To examine tibial acceleration and muscle activation during overground (OG), motorised treadmill (MT) and non-motorised treadmill conditions (NMT) when walking, jogging and running at matched velocities. Methods An accelerometer recorded acce... Read More about Tibial impacts and muscle activation during walking, jogging and running when performed overground, and on motorised and non-motorised treadmills.

Integrated oxyfuel power plant with improved CO2 separation and compression technology for EOR application (2016)
Journal Article
Font-Palma, C., Errey, O., Corden, C., Chalmers, H., Lucquiaud, M., Sanchez del Rio, M., Jackson, S., Medcalf, D., Livesey, B., Gibbins, J., & Pourkashanian, M. (2016). Integrated oxyfuel power plant with improved CO2 separation and compression technology for EOR application. Process Safety and Environmental Protection, 103(Part B), 455-465. https://doi.org/10.1016/j.psep.2016.06.024

An integrated advanced supercritical coal-fired oxyfuel power plant with a novel cryogenic CO2 separation and compression technology for high purity CO2 to suit injection for Enhanced Oil Recovery purposes is investigated. The full process is modelle... Read More about Integrated oxyfuel power plant with improved CO2 separation and compression technology for EOR application.

Numerical modeling of shape and topology optimisation of a piezoelectric cantilever beam in an energy-harvesting sensor (2016)
Journal Article
Thein, C. K., & Liu, J.-S. (2017). Numerical modeling of shape and topology optimisation of a piezoelectric cantilever beam in an energy-harvesting sensor. Engineering with Computers, 33(1), 137-148. https://doi.org/10.1007/s00366-016-0460-3

Piezoelectric materials are excellent transducers for converting mechanical energy from the environment for use as electrical energy. The conversion of mechanical energy to electrical energy is a key component in the development of self-powered devic... Read More about Numerical modeling of shape and topology optimisation of a piezoelectric cantilever beam in an energy-harvesting sensor.

Study of pyridine-mediated electrochemical reduction of CO2 to methanol at high CO2 pressure (2016)
Journal Article
Haywood, S. K., Rybchenko, S. I., Touhami, D., & Wadhawan, J. D. (2016). Study of pyridine-mediated electrochemical reduction of CO2 to methanol at high CO2 pressure. ChemSusChem, 9(13), 1660-1669. https://doi.org/10.1002/cssc.201600267

© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim The recently proposed highly efficient route of pyridine-catalyzed CO 2 reduction to methanol was explored on platinum electrodes at high CO 2 pressure. At 55 bar (5.5 MPa) of CO 2 , the bulk elec... Read More about Study of pyridine-mediated electrochemical reduction of CO2 to methanol at high CO2 pressure.

Numerical investigation of the energy performance of a guideless irregular heat and mass exchanger with corrugated heat transfer surface for dew point cooling (2016)
Journal Article
Diallo, T. M. O., Fancey, K., Ma, X., Xu, P., Zhao, X., Chen, H., & Li, D. (2016). Numerical investigation of the energy performance of a guideless irregular heat and mass exchanger with corrugated heat transfer surface for dew point cooling. Energy, 109, 803-817. https://doi.org/10.1016/j.energy.2016.05.062

© 2016 The Author(s) The paper presents an investigation into the energy performance of a novel irregular heat and mass exchanger for dew point cooling which, compared to the existing flat-plate heat exchangers, removed the use of the channel support... Read More about Numerical investigation of the energy performance of a guideless irregular heat and mass exchanger with corrugated heat transfer surface for dew point cooling.

Viscoelastically prestressed polymeric matrix composites: An overview (2016)
Journal Article
Fancey, K. S. (2016). Viscoelastically prestressed polymeric matrix composites: An overview. Journal of Reinforced Plastics and Composites, 35(17), 1290-1301. https://doi.org/10.1177/0731684416649036

Elastically prestressed polymeric matrix composites exploit the principles of prestressed concrete, i.e. fibres are stretched elastically during matrix curing. On matrix solidification, compressive stresses are created within the matrix, counterbalan... Read More about Viscoelastically prestressed polymeric matrix composites: An overview.

Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach (2016)
Journal Article
Poggio, D., Walker, M., Nimmo, W., Ma, L., & Pourkashanian, M. (2016). Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach. Waste Management, 53, 40-54. https://doi.org/10.1016/j.wasman.2016.04.024

This work proposes a novel and rigorous substrate characterisation methodology to be used with ADM1 to simulate the anaerobic digestion of solid organic waste. The proposed method uses data from both direct substrate analysis and the methane producti... Read More about Modelling the anaerobic digestion of solid organic waste – Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach.

Geometrical parameter combinations that correlate with early interaural cross-correlation coefficients in a performance hall (2016)
Journal Article
Cheung, L. Y., & Tang, S. K. (2016). Geometrical parameter combinations that correlate with early interaural cross-correlation coefficients in a performance hall. The Journal of the Acoustical Society of America, 139(5), 2741-2753. https://doi.org/10.1121/1.4948995

The previous binaural data of the authors measured inside two multi-purpose performance halls are re-analyzed using regression in this study. It is done in an attempt to establish a framework that can improve the prediction of early interaural cross-... Read More about Geometrical parameter combinations that correlate with early interaural cross-correlation coefficients in a performance hall.

The Impact of Technology-supported and Triangulated Writing Tasks on a Pilot Interdisciplinary Undergraduate Subject for Construction Disciplines (2016)
Journal Article
Kam, R., Tang, S. K., & Lee, L. (2016). The Impact of Technology-supported and Triangulated Writing Tasks on a Pilot Interdisciplinary Undergraduate Subject for Construction Disciplines. Computers and Composition, 40, 131-150. https://doi.org/10.1016/j.compcom.2016.03.004

This article presents findings from the technology-supported implementation of triangulated writing tasks in a pilot interdisciplinary subject for construction disciplines in a Hong Kong university, and discusses these findings in relation to the bro... Read More about The Impact of Technology-supported and Triangulated Writing Tasks on a Pilot Interdisciplinary Undergraduate Subject for Construction Disciplines.

Estimation of source location and ground impedance using a hybrid multiple signal classification and Levenberg-Marquardt approach (2016)
Journal Article
Tam, K. C., Lau, S. K., & Tang, S. K. (2016). Estimation of source location and ground impedance using a hybrid multiple signal classification and Levenberg-Marquardt approach. Journal of Sound and Vibration, 374, 279-296. https://doi.org/10.1016/j.jsv.2016.03.011

A microphone array signal processing method for locating a stationary point source over a locally reactive ground and for estimating ground impedance is examined in detail in the present study. A non-linear least square approach using the Levenberg-M... Read More about Estimation of source location and ground impedance using a hybrid multiple signal classification and Levenberg-Marquardt approach.

Development of radiodetection systems towards miniaturised quality control of PET and SPECT radiopharmaceuticals (2016)
Journal Article
Taggart, M. P., Tarn, M. D., Esfahani, M. M. N., Schofield, D. M., Brown, N. J., Archibald, S. J., Deakin, T., Pamme, N., & Thompson, L. F. (2016). Development of radiodetection systems towards miniaturised quality control of PET and SPECT radiopharmaceuticals. Lab on a chip, 16(9), 1605-1616. https://doi.org/10.1039/c6lc00099a

The ability to detect radiation in microfluidic devices is important for the on-chip analysis of radiopharmaceuticals, but previously reported systems have largely suffered from various limitations including cost, complexity of fabrication, and insuf... Read More about Development of radiodetection systems towards miniaturised quality control of PET and SPECT radiopharmaceuticals.

A new strategy for integration of fault estimation within fault-tolerant control (2016)
Journal Article
Lan, J., & Patton, R. J. (2016). A new strategy for integration of fault estimation within fault-tolerant control. Automatica : the journal of IFAC, the International Federation of Automatic Control, 69, 48-59. https://doi.org/10.1016/j.automatica.2016.02.014

© 2016 Elsevier Ltd. All rights reserved. The problem of active fault tolerant control (FTC) of dynamical systems involves the process of fault detection and isolation/fault estimation (FDI/FE) used to either make a decision as to when and how to cha... Read More about A new strategy for integration of fault estimation within fault-tolerant control.