Skip to main content

Research Repository

Advanced Search

All Outputs (28)

Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography (2015)
Book Chapter
Cheah, L. A., Gilbert, J. M., Gonzalez, J. A., Bai, J., Ell, S. R., Fagan, M. J., Moore, R. K., Green, P. D., & Rychenko, S. I. (2015). Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography. In Biomedical Engineering Systems and Technologies; Communications in Computer and Information Science (324-337). Springer Verlag. https://doi.org/10.1007/978-3-319-27707-3_20

Abstract: A new wearable silent speech interface (SSI) based on Permanent Magnetic Articulography (PMA) was developed with the involvement of end users in the design process. Hence, desirable features such as appearance, port-ability, ease of use and... Read More about Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography.

Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy (2015)
Journal Article
Mi, J., Connolley, T., Eskin, D., & Wang, F. (2016). Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy. Journal of Crystal Growth, 435, 24-30. https://doi.org/10.1016/j.jcrysgro.2015.11.034

High intensity ultrasonic melt treatment was applied to an Al–0.4 wt% Ti alloy over three selected temperature ranges: 810 to 770 °C (above liquidus), 770 to 730 °C (across liquidus), and 730 to 690 °C (below liquidus). The size and morphology of the... Read More about Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy.

Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions (2015)
Journal Article
Luo, X., & Wang, M. (2016). Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions. International journal of greenhouse gas control, 48(Part 2), 312-320. https://doi.org/10.1016/j.ijggc.2015.11.014

Carbon capture for fossil fuel power generation attracts an increasing attention in order to address the significant challenge of global climate change. This study aims to explore the optimal operation under different market conditions for an assumed... Read More about Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions.

Design optimization of TBM disc cutters for different geological conditions (2015)
Journal Article
Xia, Y., Zhang, K., & Liu, J. (2015). Design optimization of TBM disc cutters for different geological conditions. World Journal of Engineering and Technology, 3(4), 218-231. https://doi.org/10.4236/wjet.2015.34023

A novel optimization methodology for the disc cutter designs of tunnel boring machines (TBM) was presented. To fully understand the characteristics and performance of TBM cutters, a comprehensive list of performance parameters were investigated, incl... Read More about Design optimization of TBM disc cutters for different geological conditions.

Noise control of dipole source by using micro-perforated panel housing (2015)
Journal Article
Xi, Q., Choy, Y. S., Cheng, L., & Tang, S. K. (2016). Noise control of dipole source by using micro-perforated panel housing. Journal of Sound and Vibration, 362, 39-55. https://doi.org/10.1016/j.jsv.2015.09.047

Mitigating low-frequency noise in a small ducted fan system such as hairdryer is still a technical challenge. Traditional duct lining with porous materials work ineffectively due to the limitation of its thickness and length of small domestic product... Read More about Noise control of dipole source by using micro-perforated panel housing.

Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites (2015)
Journal Article
Fancey, K. S., & Wang, B. (2016). Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites. Composites. Part B, Engineering, 87, 336-342. https://doi.org/10.1016/j.compositesb.2015.09.003

A viscoelastically prestressed polymeric matrix composite (VPPMC) is produced by applying a tensile creep load to polymeric fibres, the load being released before the fibres are moulded into a polymeric matrix. The viscoelastically recovering fibres... Read More about Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites.

In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth (2015)
Journal Article
Li, F., Zhang, J., Dong, Q., Dai, Y., Fu, Y., Xie, H., Mi, J., Yin, F., & Sun, B. (2015). In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth. Materials Characterization, 109, 9-18. https://doi.org/10.1016/j.matchar.2015.09.008

© 2015 Elsevier Inc. All rights reserved. Special growth pattern representing unique growth conditions is a vital clue to investigate the morphology evolution mechanism in metallic alloy solidification. The dendrite pattern and growth orientation of... Read More about In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth.

A method to estimate trends in distributions of 1 min rain rates from numerical weather prediction data (2015)
Journal Article
Paulson, K., Ranatunga, C., & Bellerby, T. (2015). A method to estimate trends in distributions of 1 min rain rates from numerical weather prediction data. Radio science, 50(9), 931-940. https://doi.org/10.1002/2015RS005651

It is known that the rain rate exceeded 0.01% of the time in the UK has experienced an increasing trend over the last 20 years. It is very likely that rain fade and outage experience a similar trend. This paper presents a globally applicable method t... Read More about A method to estimate trends in distributions of 1 min rain rates from numerical weather prediction data.

Process intensification for post combustion CO₂ capture with chemical absorption: a critical review (2015)
Journal Article
Wang, M., Joel, A. S., Ramshaw, C., Eimer, D., & Musa, N. M. (2015). Process intensification for post combustion CO₂ capture with chemical absorption: a critical review. Applied energy, 158, 275-291. https://doi.org/10.1016/j.apenergy.2015.08.083

The concentration of CO₂ in the atmosphere is increasing rapidly. CO₂ emissions may have an impact on global climate change. Effective CO₂ emission abatement strategies such as carbon capture and storage (CCS) are required to combat this trend. Compa... Read More about Process intensification for post combustion CO₂ capture with chemical absorption: a critical review.

Ab initio simulation: The correlation between the local melt structure and segregation behavior of Fe, V, Ti and Si in liquid Al (2015)
Journal Article
Yang, J., Zhang, J., Dai, Y., Ma, J., Li, F., Bian, F., Mi, J., & Sun, B. (2015). Ab initio simulation: The correlation between the local melt structure and segregation behavior of Fe, V, Ti and Si in liquid Al. Computational Materials Science, 109, 41-48. https://doi.org/10.1016/j.commatsci.2015.05.033

© 2015 Elsevier B.V. All rights reserved. In this study, the elements Fe, Si, V and Ti, which exhibit typical segregation behavior in Al, were chosen as solute atoms to be analyzed. The structure of molten Al, the local structure around solute atoms... Read More about Ab initio simulation: The correlation between the local melt structure and segregation behavior of Fe, V, Ti and Si in liquid Al.

Security aspects in cognitive radio networks detection and mitigation of primary user emulation attacks (2015)
Presentation / Conference Contribution
Ammar, M., Riley, N., Mehdawi, M., Fanan, A., & Zolfaghari, M. (2015, April). Security aspects in cognitive radio networks detection and mitigation of primary user emulation attacks. Presented at COCORA 2015 : The Fifth International Conference on Advances in Cognitive Radio

Cognitive Radio Networks (CR) is an advanced growing technique and a promising technology for the upcoming generation of the wireless networks. Deployment of such networks is hindered by the vulnerabilities that these networks are exposed to, in this... Read More about Security aspects in cognitive radio networks detection and mitigation of primary user emulation attacks.

Study on heat integration of supercritical coal-fired power plant with post-combustion CO₂ capture process through process simulation (2015)
Journal Article
Liu, X., Chen, J., Luo, X., Wang, M., & Meng, H. (2015). Study on heat integration of supercritical coal-fired power plant with post-combustion CO₂ capture process through process simulation. Fuel, 158(October), 625-633. https://doi.org/10.1016/j.fuel.2015.06.033

Coal-fired power plant (CFPP) is one of the main sources of anthropogenic CO₂ emissions. Capturing CO₂ from CFPP by post-combustion process plays an important role to mitigate CO₂ emissions. However, a significant thermal efficiency drop was observed... Read More about Study on heat integration of supercritical coal-fired power plant with post-combustion CO₂ capture process through process simulation.

Process analysis of pressurized oxy-coal power cycle for carbon capture application integrated with liquid air power generation and binary cycle engines (2015)
Journal Article
Aneke, M., & Wang, M. (2015). Process analysis of pressurized oxy-coal power cycle for carbon capture application integrated with liquid air power generation and binary cycle engines. Applied energy, 154(September), 556-566. https://doi.org/10.1016/j.apenergy.2015.05.030

In this paper, the thermodynamic advantage of integrating liquid air power generation (LAPG) process and binary cycle waste heat recovery technology to a standalone pressurized oxy-coal combustion supercritical steam power generation cycle is investi... Read More about Process analysis of pressurized oxy-coal power cycle for carbon capture application integrated with liquid air power generation and binary cycle engines.

A bistable morphing composite using viscoelastically generated prestress (2015)
Journal Article
Wang, B., & Fancey, K. S. (2015). A bistable morphing composite using viscoelastically generated prestress. Materials letters, 158(November), 108-110. https://doi.org/10.1016/j.matlet.2015.05.129

Elastically generated prestress within polymeric composites can be used to create bistable morphing structures; i.e. they can ‘snap through’ between one of two states. In this paper, a morphing bistable structure has been produced, utilising viscoela... Read More about A bistable morphing composite using viscoelastically generated prestress.

Modelling and process analysis of hybrid hydration-absorption column for ethylene recovery from refinery dry gas (2015)
Journal Article
Luo, X., Wang, M., Li, X., Li, Y., Chen, C., & Sui, H. (2015). Modelling and process analysis of hybrid hydration-absorption column for ethylene recovery from refinery dry gas. Fuel, 158(October), 424-434. https://doi.org/10.1016/j.fuel.2015.05.035

Effective recovery of ethylene from dry gas plays an increasingly important role to improve economic performance of refineries. Conventional approaches such as cryogenic separation and cold oil absorption are energy consuming. Hybrid hydration–absorp... Read More about Modelling and process analysis of hybrid hydration-absorption column for ethylene recovery from refinery dry gas.

Solidification of Al alloys under electromagnetic pulses and characterization of the 3D microstructures under synchrotron x-ray tomography (2015)
Journal Article
Manuwong, T., Zhang, W., Kazinczi, P. L., Bodey, A. J., Rau, C., & Mi, J. (2015). Solidification of Al alloys under electromagnetic pulses and characterization of the 3D microstructures under synchrotron x-ray tomography. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 46(7), 2908-2915. https://doi.org/10.1007/s11661-015-2874-8

A novel programmable electromagnetic pulse device was developed and used to study the solidification of Al-15 pct Cu and Al-35 pct Cu alloys. The pulsed magnetic fluxes and Lorentz forces generated inside the solidifying melts were simulated using fi... Read More about Solidification of Al alloys under electromagnetic pulses and characterization of the 3D microstructures under synchrotron x-ray tomography.

High speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes (2015)
Journal Article
Tan, D., Lee, T. L., Khong, J. C., Connolley, T., Fezzaa, K., & Mi, J. (2015). High speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 46(7), 2851-2861. https://doi.org/10.1007/s11661-015-2872-x

The highly dynamic behaviour of ultrasonic bubble implosion in liquid metal, the multiphase liquid metal flow containing bubbles and particles, and the interaction between ultrasonic waves and semisolid phases during solidification of metal were stud... Read More about High speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes.

Potential for improving the energy efficiency of cryogenic air separation unit (ASU) using binary heat recovery cycles (2015)
Journal Article
Aneke, M., & Wang, M. (2015). Potential for improving the energy efficiency of cryogenic air separation unit (ASU) using binary heat recovery cycles. Applied thermal engineering, 81(April), 223-231. https://doi.org/10.1016/j.applthermaleng.2015.02.034

In this paper, the potential of improving the energy efficiency of a conventional cryogenic air separation unit (ASU) was investigated through modelling and simulation using Aspen Plus® v 8.1. It is achieved through converting the heat from the compr... Read More about Potential for improving the energy efficiency of cryogenic air separation unit (ASU) using binary heat recovery cycles.