Skip to main content

Research Repository

Advanced Search

All Outputs (32)

Modelling noise annoyance responses to combined sound sources and views of sea, road traffic, and mountain greenery (2018)
Journal Article
Chau, C. K., Leung, T. M., Xu, J. M., & Tang, S. K. (2018). Modelling noise annoyance responses to combined sound sources and views of sea, road traffic, and mountain greenery. The Journal of the Acoustical Society of America, 144(6), 3503-3513. https://doi.org/10.1121/1.5083833

This paper studies the effect of human perception of visual and audio settings in an urban environment on annoyance. Video clips were projected onto a window panel of a living room to simulate neighborhood views containing different percentages of se... Read More about Modelling noise annoyance responses to combined sound sources and views of sea, road traffic, and mountain greenery.

Enhancement of wave energy absorption efficiency via geometry and power take-off damping tuning (2018)
Journal Article
Jin, S., Patton, R. J., & Guo, B. (2019). Enhancement of wave energy absorption efficiency via geometry and power take-off damping tuning. Energy, 169, 819-832. https://doi.org/10.1016/j.energy.2018.12.074

In this work a three dimensional computational fluid dynamic (CFD) model has been constructed based on a 1/50 scale heaving point absorber wave energy converter (PAWEC). The CFD model is validated first via wave tank tests and then is applied in this... Read More about Enhancement of wave energy absorption efficiency via geometry and power take-off damping tuning.

Fundamental studies of ultrasonic melt processing (2018)
Journal Article
Eskin, D. G., Tzanakis, I., Wang, F., Lebon, G. S., Subroto, T., Pericleous, K., & Mi, J. (2019). Fundamental studies of ultrasonic melt processing. Ultrasonics Sonochemistry, 52, 455-467. https://doi.org/10.1016/j.ultsonch.2018.12.028

Ultrasonic (cavitation) melt processing attracts considerable interest from both academic and industrial communities as a promising route to provide clean, environment friendly and energy efficient solutions for some of the core issues of the metal c... Read More about Fundamental studies of ultrasonic melt processing.

The mechanical loading and muscle activation of four common exercises used in osteoporosis prevention for early postmenopausal women (2018)
Journal Article
Montgomery, G., Abt, G., Dobson, C., Smith, T., Evans, W., & Ditroilo, M. (2019). The mechanical loading and muscle activation of four common exercises used in osteoporosis prevention for early postmenopausal women. Journal of Electromyography and Kinesiology, 44, 124-131. https://doi.org/10.1016/j.jelekin.2018.12.004

High impact exercise can reduce postmenopausal bone loss, however stimulus frequency (loading cycles per second) can affect osteogenesis. We aimed to examine the effect of stimulus frequency on the mechanical loading of four common osteoporosis preve... Read More about The mechanical loading and muscle activation of four common exercises used in osteoporosis prevention for early postmenopausal women.

On low frequency sound propagation across closely coupled narrow cavities along an infinite duct and the similarity in stopband cut-on frequencies (2018)
Journal Article
Tang, Y., & Tang, S. K. (2019). On low frequency sound propagation across closely coupled narrow cavities along an infinite duct and the similarity in stopband cut-on frequencies. Journal of Sound and Vibration, 443, 411-429. https://doi.org/10.1016/j.jsv.2018.11.049

The propagation of sound across closely coupled narrow rectangular cavities in an infinitely long duct is studied numerically using finite-element simulation and the method of mode matching in the present investigation. Sound frequencies below the fi... Read More about On low frequency sound propagation across closely coupled narrow cavities along an infinite duct and the similarity in stopband cut-on frequencies.

In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields (2018)
Journal Article
Wang, S., Kang, J., Guo, Z., Lee, T. L., Zhang, X., Wang, Q., Deng, C., & Mi, J. (2019). In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields. Acta Materialia, 165, 388-397. https://doi.org/10.1016/j.actamat.2018.11.053

The fatigue fragmentation of dendritic structures of a SCN-5wt.% Camphor transparent alloy in an ultrasound field was investigated systematically using high-speed imaging. Dynamic interactions between oscillating ultrasonic bubbles and the primary an... Read More about In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields.

An assessment of the role of the falx cerebri and tentorium cerebelli in the cranium of the cat (Felis silvestris catus) (2018)
Journal Article
Sellés de Lucas, V., Dutel, H., Evans, S. E., Gröning, F., Sharp, A. C., Watson, P. J., & Fagan, M. J. (2018). An assessment of the role of the falx cerebri and tentorium cerebelli in the cranium of the cat (Felis silvestris catus). Interface, 15(147), Article 20180278. https://doi.org/10.1098/rsif.2018.0278

© 2018 The Author(s). The falx cerebri and the tentorium cerebelli are two projections of the dura mater in the cranial cavity which ossify to varying degrees in some mammalian species. The idea that the ossification of these structures may be necess... Read More about An assessment of the role of the falx cerebri and tentorium cerebelli in the cranium of the cat (Felis silvestris catus).

Pulse External Fields Processing of Metal Alloys (2018)
Book Chapter
Mi, J. (2018). Pulse External Fields Processing of Metal Alloys. In D. G. Eskin, & J. Mi (Eds.), Solidification Processing of Metallic Alloys Under External Fields (243-275). Springer. https://doi.org/10.1007/978-3-319-94842-3_7

© 2018, Springer Nature Switzerland AG. Research and applications of electromagnetic processing of materials began in the 1930s. In those early days, electromagnetic induction was the main technique and it was used for heating or melting metal alloys... Read More about Pulse External Fields Processing of Metal Alloys.

In Situ Studies of the Solidification Dynamics of Metal Alloys (2018)
Book Chapter
Mi, J. (2018). In Situ Studies of the Solidification Dynamics of Metal Alloys. In D. G. Eskin, & J. Mi (Eds.), Solidification Processing of Metallic Alloys Under External Fields (19-74). Springer. https://doi.org/10.1007/978-3-319-94842-3_2

© 2018, Springer Nature Switzerland AG. Since the 1990s, tens of 3rd generation synchrotron X-ray facilities have been built around the world and made available for research in almost all scientific disciplines. The high brilliance, high coherence an... Read More about In Situ Studies of the Solidification Dynamics of Metal Alloys.

CO2 capture using mesocellular siliceous foam (MCF)-supported CaO (2018)
Journal Article
Gao, F., Huang, J., Sun, H., Hu, J., Wang, M., Mi, J., & Wu, C. (2019). CO2 capture using mesocellular siliceous foam (MCF)-supported CaO. Journal of the Energy Institute, 92(5), 1591-1598. https://doi.org/10.1016/j.joei.2018.07.015

CaO is a promising material as an alternative CO2 capture material which can be used at high temperature. However, CaO sinters to form large particles under long-term high temperature conditions, resulting in a rapid decrease of its surface area and... Read More about CO2 capture using mesocellular siliceous foam (MCF)-supported CaO.

Towards “green” viscoelastically prestressed composites: Cellulose fibre reinforcement (2018)
Journal Article
Qin, Y., & Fancey, K. S. (2018). Towards “green” viscoelastically prestressed composites: Cellulose fibre reinforcement. Composites. Part B, Engineering, 154, 439-448. https://doi.org/10.1016/j.compositesb.2018.08.096

With growing concerns over environmental issues, fibre reinforced composites based on renewable, biodegradable low-cost cellulosic/cellulose fibres increasingly attract interest. This paper reports on the first study to produce viscoelastically prest... Read More about Towards “green” viscoelastically prestressed composites: Cellulose fibre reinforcement.

Validation of an algorithm to reveal the U wave in atrial fibrillation (2018)
Journal Article
Al-Karadi, M. S., Wilkinson, A. J., Caldwell, J., & Langley, P. (2018). Validation of an algorithm to reveal the U wave in atrial fibrillation. Scientific reports, 8(1), Article 11946. https://doi.org/10.1038/s41598-018-30493-8

Major cardiac organisations recommend U wave abnormalities should be reported during ECG interpretation. However, U waves cannot be measured in patients with atrial fibrillation (AF) due to the obscuring fibrillatory wave. The aim was to validate a U... Read More about Validation of an algorithm to reveal the U wave in atrial fibrillation.

Plastic scintillator-based microfluidic devices for miniaturized detection of Positron Emission Tomography radiopharmaceuticals (2018)
Journal Article
Tarn, M. D., Kızılyer, N. Y., Esfahani, M. M. N., Joshi, P., Brown, N. J., Pamme, N., Jenkins, D. G., & Archibald, S. J. (2018). Plastic scintillator-based microfluidic devices for miniaturized detection of Positron Emission Tomography radiopharmaceuticals. Chemistry: a European journal, 24(52), 13749-13753. https://doi.org/10.1002/chem.201802395

A miniaturized radio-HPLC detector has been developed comprising a microfluidic device fabricated from plastic scintillator in combination with a silicon photomultiplier light sensor, and tested with samples containing a positron-emitting radionuclid... Read More about Plastic scintillator-based microfluidic devices for miniaturized detection of Positron Emission Tomography radiopharmaceuticals.

Precise measurements of torque in von Karman swirling flow driven by a bladed disk (2018)
Journal Article
Mukherjee, A., Lukaschuk, S., Burnishev, Y., Falkovich, G., & Steinberg, V. (2018). Precise measurements of torque in von Karman swirling flow driven by a bladed disk. Journal of Turbulence, 19(8), 647-663. https://doi.org/10.1080/14685248.2018.1494833

© 2018 Informa UK Limited, trading as Taylor & Francis Group Scrupulous measurements and detailed data analysis of the torque in a swirling turbulent flow driven by counter-rotating bladed disks reveal an apparent breaking of the law of similarity.... Read More about Precise measurements of torque in von Karman swirling flow driven by a bladed disk.

Relationships between walking speed, T-score and age with gait parameters in older post-menopausal women with low bone mineral density (2018)
Journal Article
Dostanpor, A., Dobson, C. A., & Vanicek, N. (2018). Relationships between walking speed, T-score and age with gait parameters in older post-menopausal women with low bone mineral density. Gait and Posture, 64, 230-237. https://doi.org/10.1016/j.gaitpost.2018.05.005

Background: The gait patterns of women with low bone mineral density (BMD) or osteoporosis have not been thoroughly explored, and when examined, often studied in relation to falls and kyphosis. Research question: The aim of this study was to investig... Read More about Relationships between walking speed, T-score and age with gait parameters in older post-menopausal women with low bone mineral density.

Viscosity effect on a point absorber wave energy converter hydrodynamics validated by simulation and experiment (2018)
Journal Article
Siya, J., Patton, R. J., & Guo, B. (2018). Viscosity effect on a point absorber wave energy converter hydrodynamics validated by simulation and experiment. Renewable energy, 129(A), 500-512. https://doi.org/10.1016/j.renene.2018.06.006

To achieve optimal power in a wave energy conversion (WEC) system it is necessary to understand the device hydrodynamics. To maximize conversion efficiency the goal is to tune the WEC performance into resonance. The main challenge then to be overcome... Read More about Viscosity effect on a point absorber wave energy converter hydrodynamics validated by simulation and experiment.

A review of solar photovoltaic-thermoelectric hybrid system for electricity generation (2018)
Journal Article
Li, G., Shittu, S., Diallo, T. M., Yu, M., Zhao, X., & Ji, J. (2018). A review of solar photovoltaic-thermoelectric hybrid system for electricity generation. Energy, 158, 41-58. https://doi.org/10.1016/j.energy.2018.06.021

Solar energy application in a wider spectrum has the potential for high efficiency energy conversion. However, solar cells can only absorb photon energy of the solar spectrum near the solar cell band-gap energy, and the remaining energy will be conve... Read More about A review of solar photovoltaic-thermoelectric hybrid system for electricity generation.

Modelling and neutron diffraction characterization of the interfacial bonding of spray formed dissimilar steels (2018)
Journal Article
Lee, T. L., Mi, J., Ren, S., Zhao, S., Fan, J., Kabra, S., Zhang, S., & Grant, P. S. (2018). Modelling and neutron diffraction characterization of the interfacial bonding of spray formed dissimilar steels. Acta Materialia, 155, 318-330. https://doi.org/10.1016/j.actamat.2018.05.055

The spray forming of thick, dissimilar steel clad tubes with the objective of achieving a high integrity metallurgical bond across the cladding-substrate interface able to withstand residual stresses and subsequent thermo-mechanical processing was in... Read More about Modelling and neutron diffraction characterization of the interfacial bonding of spray formed dissimilar steels.

Cases of energy system in a green building in UK (2018)
Book Chapter
Zhao, X., Ma, X., Xu, P., Thierno, D., Zhu, Z., & Zhou, J. (2018). Cases of energy system in a green building in UK. In R. Wang, & X. Zhai (Eds.), Handbook of Energy Systems in Green Buildings (1741-1794). Springer. https://doi.org/10.1007/978-3-662-49120-1_15

© Springer Nature Singapore Pte Ltd. 2018. This chapter gives an overview of the current development of the indirect evaporative cooling technologies, PV and PV/T solar energy systems, natural ventilation systems, heat recovery systems, and low-energ... Read More about Cases of energy system in a green building in UK.