All Outputs (499)

Study of the multi-length scale structure of metallic glasses using synchrotron X-rays and phase-field crystal modelling (2016)
Thesis
Zhang, W. Study of the multi-length scale structure of metallic glasses using synchrotron X-rays and phase-field crystal modelling. (Thesis). University of Hull. https://hull-repository.worktribe.com/output/4218491

Metallic glasses and composites are a new class of metal alloys which have unique mechanical and functional properties. The structure of metallic glasses and composites are key to understand the glass formation ability and also their unique propertie... Read More about Study of the multi-length scale structure of metallic glasses using synchrotron X-rays and phase-field crystal modelling.

A new strategy for integration of fault estimation within fault-tolerant control (2016)
Journal Article
Lan, J., & Patton, R. J. (2016). A new strategy for integration of fault estimation within fault-tolerant control. Automatica : the journal of IFAC, the International Federation of Automatic Control, 69, 48-59. https://doi.org/10.1016/j.automatica.2016.02.014

© 2016 Elsevier Ltd. All rights reserved. The problem of active fault tolerant control (FTC) of dynamical systems involves the process of fault detection and isolation/fault estimation (FDI/FE) used to either make a decision as to when and how to cha... Read More about A new strategy for integration of fault estimation within fault-tolerant control.

Positron detection in silica monoliths for miniaturised quality control of PET radiotracers (2016)
Journal Article
Tarn, M. D., Maneuski, D., Alexander, R., Brown, N. J., O’Shea, V., Pimlott, S. L., Pamme, N., & Archibald, S. J. (2016). Positron detection in silica monoliths for miniaturised quality control of PET radiotracers. Chemical communications : Chem comm / the Royal Society of Chemistry, 52(45), 7221-7224. https://doi.org/10.1039/c6cc00660d

We demonstrate the use of the miniaturised Medipix positron sensor for detection of the clinical PET radiotracer, [⁶⁸Ga]gallium-citrate, on a silica-based monolith, towards microfluidic quality control. The system achieved a far superior signal-to-no... Read More about Positron detection in silica monoliths for miniaturised quality control of PET radiotracers.

A silent speech system based on permanent magnet articulography and direct synthesis (2016)
Journal Article
Gonzalez, J. A., Cheah, L. A., Gilbert, J. M., Bai, J., Ell, S. R., Green, P. D., & Moore, R. K. (2016). A silent speech system based on permanent magnet articulography and direct synthesis. Computer speech & language, 39, 67-87. https://doi.org/10.1016/j.csl.2016.02.002

In this paper we present a silent speech interface (SSI) system aimed at restoring speech communication for individuals who have lost their voice due to laryngectomy or diseases affecting the vocal folds. In the proposed system, articulatory data cap... Read More about A silent speech system based on permanent magnet articulography and direct synthesis.

Assessment and parameter identification of simplified models to describe the kinetics of semi-continuous biomethane production from anaerobic digestion of green and food waste (2016)
Journal Article
Owhondah, R. O., Walker, M., Ma, L., Nimmo, B., Ingham, D. B., Poggio, D., & Pourkashanian, M. (2016). Assessment and parameter identification of simplified models to describe the kinetics of semi-continuous biomethane production from anaerobic digestion of green and food waste. Bioprocess and biosystems engineering, 39(6), 977-992. https://doi.org/10.1007/s00449-016-1577-x

Biochemical reactions occurring during anaerobic digestion have been modelled using reaction kinetic equations such as first-order, Contois and Monod which are then combined to form mechanistic models. This work considers models which include between... Read More about Assessment and parameter identification of simplified models to describe the kinetics of semi-continuous biomethane production from anaerobic digestion of green and food waste.

Experimental investigation of the thermal and electrical performance of the heat pipe BIPV/T system with metal wires (2016)
Journal Article
Wang, Z., Qiu, F., Yang, W., Zhao, X., & Mei, S. (2016). Experimental investigation of the thermal and electrical performance of the heat pipe BIPV/T system with metal wires. Applied energy, 170, 314-323. https://doi.org/10.1016/j.apenergy.2016.02.140

© 2016 Elsevier Ltd. Heat pipe building integrated photovoltaic/thermal system (heat pipe BIPV/T system) can produce both the electrical and thermal energies at the same time, which have been paid enormous attentions since the energy crisis in the 19... Read More about Experimental investigation of the thermal and electrical performance of the heat pipe BIPV/T system with metal wires.

Modelling and optimisation of a bimorph piezoelectric cantilever beam in an energy harvesting application (2016)
Journal Article
Thein, C. K., Ooi, B. L., Liu, J. S., & Gilbert, J. M. (2016). Modelling and optimisation of a bimorph piezoelectric cantilever beam in an energy harvesting application. Journal of Engineering Science and Technology, 11(2), 212-227

Piezoelectric materials are excellent transducers in converting vibrational energy into electrical energy, and vibration-based piezoelectric generators are seen as an enabling technology for wireless sensor networks, especially in selfpowered devices... Read More about Modelling and optimisation of a bimorph piezoelectric cantilever beam in an energy harvesting application.

Skeletal immaturity, rostral sparing, and disparate hip morphologies as biomechanical causes for Legg-Calvé-Perthes’ disease (2016)
Journal Article
Berthaume, M. A., Perry, D. C., Dobson, C. A., Witzel, U., Clarke, N. M., & Fagan, M. J. (2016). Skeletal immaturity, rostral sparing, and disparate hip morphologies as biomechanical causes for Legg-Calvé-Perthes’ disease. Clinical Anatomy, 29(6), 759-772. https://doi.org/10.1002/ca.22690

Legg-Calvé-Perthes' (Perthes') disease is a developmental disease of the hip joint that may result in numerous short and long term problems. The etiology of the disease remains largely unknown, but the mechanism is believed to be vascular and/or biom... Read More about Skeletal immaturity, rostral sparing, and disparate hip morphologies as biomechanical causes for Legg-Calvé-Perthes’ disease.

Comparison of spectrum occupancy measurements using software defined radio RTL-SDR with a conventional spectrum analyzer approach (2016)
Presentation / Conference Contribution
Fanan, A., Riley, N., Mehdawi, M., Ammar, M., & Zolfaghari, M. (2016, November). Comparison of spectrum occupancy measurements using software defined radio RTL-SDR with a conventional spectrum analyzer approach. Presented at 2015 23rd Telecommunications Forum Telfor (TELFOR)

In the present day Cognitive Radio has become a realistic option for solution of the spectrum scarcity problem in wireless communication. Recently, the TV band has attracted attention due to the considerable potential for exploitation of available TV... Read More about Comparison of spectrum occupancy measurements using software defined radio RTL-SDR with a conventional spectrum analyzer approach.

Spectrum occupancy measurements and lessons learned in the context of cognitive radio (2016)
Presentation / Conference Contribution
Mehdawi, M., Riley, N. G., Ammar, M., Fanan, A., & Zolfaghari, M. (2015, November). Spectrum occupancy measurements and lessons learned in the context of cognitive radio. Presented at 2015 23rd Telecommunications Forum, TELFOR 2015

Various measurement campaigns have shown that numerous spectrum bands are vacant even though licenses have been issued by the regulatory agencies. Dynamic spectrum access (DSA) based on Cognitive Radio (CR) has been regarded as a prospective solution... Read More about Spectrum occupancy measurements and lessons learned in the context of cognitive radio.

Quality measurements of an UWB reduced-size CPW-fed aperture antenna (2016)
Book Chapter
Zolfaghari, M., Riley, N. G., Mehdawi, M., Fanan, A., Ammar, M., & Meng, F. (2016). Quality measurements of an UWB reduced-size CPW-fed aperture antenna. In Telecommunications forum Telfor (TELFOR), 2015 23rd (543-546). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/TELFOR.2015.7377526

The paper presents a characterization of a compact co-planar waveguide (CPW)-fed slot loaded low return loss planar printed antenna designed for wireless communication and ultra-wideband (UWB) applications. Following a review of the antenna design, w... Read More about Quality measurements of an UWB reduced-size CPW-fed aperture antenna.

Multi-scale characterisation of the 3D microstructure of a thermally-shocked bulk metallic glass matrix composite (2016)
Journal Article
Zhang, W., Bodey, A. J., Sui, T., Kockelmann, W., Rau, C., Korsunsky, A. M., & Mi, J. (2016). Multi-scale characterisation of the 3D microstructure of a thermally-shocked bulk metallic glass matrix composite. Scientific reports, 6(1), 18545-1-18545-7. https://doi.org/10.1038/srep18545

Bulk metallic glass matrix composites (BMGMCs) are a new class of metal alloys which have significantly increased ductility and impact toughness, resulting from the ductile crystalline phases distributed uniformly within the amorphous matrix. However... Read More about Multi-scale characterisation of the 3D microstructure of a thermally-shocked bulk metallic glass matrix composite.

Experimental investigation of the energy performance of a novel Micro-encapsulated Phase Change Material (MPCM) slurry based PV/T system (2016)
Journal Article
Qiu, Z., Ma, X., Zhao, X., Li, P., & Ali, S. (2016). Experimental investigation of the energy performance of a novel Micro-encapsulated Phase Change Material (MPCM) slurry based PV/T system. Applied energy, 165, 260-271. https://doi.org/10.1016/j.apenergy.2015.11.053

© 2015 Elsevier Ltd. As a follow-on work of the authors' theoretical study, the paper presented an experimental investigation into the energy performance of a novel PV/T thermal and power system employing the Micro-encapsulated Phase Change Material... Read More about Experimental investigation of the energy performance of a novel Micro-encapsulated Phase Change Material (MPCM) slurry based PV/T system.

Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography (2015)
Book Chapter
Cheah, L. A., Gilbert, J. M., Gonzalez, J. A., Bai, J., Ell, S. R., Fagan, M. J., Moore, R. K., Green, P. D., & Rychenko, S. I. (2015). Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography. In Biomedical Engineering Systems and Technologies; Communications in Computer and Information Science (324-337). Springer Verlag. https://doi.org/10.1007/978-3-319-27707-3_20

Abstract: A new wearable silent speech interface (SSI) based on Permanent Magnetic Articulography (PMA) was developed with the involvement of end users in the design process. Hence, desirable features such as appearance, port-ability, ease of use and... Read More about Integrating user-centred design in the development of a silent speech interface based on permanent magnetic articulography.

Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy (2015)
Journal Article
Mi, J., Connolley, T., Eskin, D., & Wang, F. (2016). Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy. Journal of Crystal Growth, 435, 24-30. https://doi.org/10.1016/j.jcrysgro.2015.11.034

High intensity ultrasonic melt treatment was applied to an Al–0.4 wt% Ti alloy over three selected temperature ranges: 810 to 770 °C (above liquidus), 770 to 730 °C (across liquidus), and 730 to 690 °C (below liquidus). The size and morphology of the... Read More about Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy.

Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions (2015)
Journal Article
Luo, X., & Wang, M. (2016). Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions. International journal of greenhouse gas control, 48(Part 2), 312-320. https://doi.org/10.1016/j.ijggc.2015.11.014

Carbon capture for fossil fuel power generation attracts an increasing attention in order to address the significant challenge of global climate change. This study aims to explore the optimal operation under different market conditions for an assumed... Read More about Optimal operation of MEA-based post-combustion carbon capture for natural gas combined cycle power plants under different market conditions.

Design optimization of TBM disc cutters for different geological conditions (2015)
Journal Article
Xia, Y., Zhang, K., & Liu, J. (2015). Design optimization of TBM disc cutters for different geological conditions. World Journal of Engineering and Technology, 3(4), 218-231. https://doi.org/10.4236/wjet.2015.34023

A novel optimization methodology for the disc cutter designs of tunnel boring machines (TBM) was presented. To fully understand the characteristics and performance of TBM cutters, a comprehensive list of performance parameters were investigated, incl... Read More about Design optimization of TBM disc cutters for different geological conditions.

Noise control of dipole source by using micro-perforated panel housing (2015)
Journal Article
Xi, Q., Choy, Y. S., Cheng, L., & Tang, S. K. (2016). Noise control of dipole source by using micro-perforated panel housing. Journal of Sound and Vibration, 362, 39-55. https://doi.org/10.1016/j.jsv.2015.09.047

Mitigating low-frequency noise in a small ducted fan system such as hairdryer is still a technical challenge. Traditional duct lining with porous materials work ineffectively due to the limitation of its thickness and length of small domestic product... Read More about Noise control of dipole source by using micro-perforated panel housing.

Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites (2015)
Journal Article
Fancey, K. S., & Wang, B. (2016). Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites. Composites. Part B, Engineering, 87, 336-342. https://doi.org/10.1016/j.compositesb.2015.09.003

A viscoelastically prestressed polymeric matrix composite (VPPMC) is produced by applying a tensile creep load to polymeric fibres, the load being released before the fibres are moulded into a polymeric matrix. The viscoelastically recovering fibres... Read More about Towards optimisation of load-time conditions for producing viscoelastically prestressed polymeric matrix composites.

In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth (2015)
Journal Article
Li, F., Zhang, J., Dong, Q., Dai, Y., Fu, Y., Xie, H., Mi, J., Yin, F., & Sun, B. (2015). In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth. Materials Characterization, 109, 9-18. https://doi.org/10.1016/j.matchar.2015.09.008

© 2015 Elsevier Inc. All rights reserved. Special growth pattern representing unique growth conditions is a vital clue to investigate the morphology evolution mechanism in metallic alloy solidification. The dendrite pattern and growth orientation of... Read More about In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth.