All Outputs (398)

A porous media model for the numerical simulation of acoustic attenuation by perforated liners in the presence of grazing flows (2021)
Journal Article
Wang, J., Rubini, P., & Qin, Q. (2021). A porous media model for the numerical simulation of acoustic attenuation by perforated liners in the presence of grazing flows. Applied Sciences, 11(10), Article 4677. https://doi.org/10.3390/app11104677

In this paper, a novel model is proposed for the numerical simulation of noise-attenuating perforated liners. Effusion cooling liners offer the potential of being able to attenuate combustion instabilities in gas turbine engines. However, the acousti... Read More about A porous media model for the numerical simulation of acoustic attenuation by perforated liners in the presence of grazing flows.

Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound (2021)
Journal Article
Zhang, Z., Wang, C., Koe, B., Schlepütz, C. M., Irvine, S., & Mi, J. (2021). Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound. Acta Materialia, 209, Article 116796. https://doi.org/10.1016/j.actamat.2021.116796

High speed synchrotron X-ray imaging and ultrafast tomography were used to study in situ and in real time the fragmentation and growth dynamics of dendritic microstructures of an Al-15%Cu alloy in solidification under ultrasound. An ultrasound of 30... Read More about Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound.

Experimental analysis of CO2 frost front behaviour in moving packed beds for cryogenic CO2 capture (2021)
Journal Article
Cann, D., Font-Palma, C., & Willson, P. (2021). Experimental analysis of CO2 frost front behaviour in moving packed beds for cryogenic CO2 capture. International journal of greenhouse gas control, 107, Article 103291. https://doi.org/10.1016/j.ijggc.2021.103291

In this work, the feasibility of a novel method of cryogenic carbon capture based on carbon dioxide frost deposition onto a cold moving bed is explored. As a gas mixture including CO2 flows through a sufficiently cold packed bed, CO2 is deposited ont... Read More about Experimental analysis of CO2 frost front behaviour in moving packed beds for cryogenic CO2 capture.

Techno‐environmental analysis of the use of green hydrogen for cogeneration from the gasification of wood and fuel cell (2021)
Journal Article
Font‐palma, C., Díaz-Herrera, P., Gonzalez-Diaz, M. O., Jiang, L., Sánchez Ladrón de Guevara, J. C., & Gonzalez-Diaz, A. (2021). Techno‐environmental analysis of the use of green hydrogen for cogeneration from the gasification of wood and fuel cell. Sustainability, 13(6), Article 3232. https://doi.org/10.3390/su13063232

This paper aims to evaluate the use of wood biomass in a gasifier integrated with a fuel cell system as a low carbon technology. Experimental information of the wood is provided by the literature. The syngas is purified by using pressure swing adsorp... Read More about Techno‐environmental analysis of the use of green hydrogen for cogeneration from the gasification of wood and fuel cell.

Comparative cranial biomechanics in two lizard species: impact of variation in cranial design (2021)
Journal Article
Groning, F., Dutel, H., Gröning, F., Sharp, A. C., Watson, P. J., Herrel, A., Ross, C. F., Jones, M. E. H., Evans, S. E., & Fagan, M. J. (2021). Comparative cranial biomechanics in two lizard species: impact of variation in cranial design. The journal of experimental biology, 224(5), Article jeb.234831. https://doi.org/10.1242/jeb.234831

Cranial morphology in lepidosaurs is highly disparate and characterised by the frequent loss or reduction of bony elements. In varanids and geckos, the loss of the postorbital bar is associated with changes in skull shape, but the mechanical principl... Read More about Comparative cranial biomechanics in two lizard species: impact of variation in cranial design.

Direct observation of modal hybridization in nanofluidic fiber [Invited] (2021)
Journal Article
Gomes, A. D., Zhao, J. T., Tuniz, A., & Schmidt, M. A. (2021). Direct observation of modal hybridization in nanofluidic fiber [Invited]. Optical Materials Express, 11(2), 559-568. https://doi.org/10.1364/OME.413199

Hybrid-material optical fibers enhance the capabilities of fiber-optics technologies, extending current functionalities to several emerging application areas. Such platforms rely on the integration of novel materials into the fiber core or cladding,... Read More about Direct observation of modal hybridization in nanofluidic fiber [Invited].

3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography (2021)
Journal Article
Wang, S., Guo, Z., Kang, J., Zou, M., Li, X., Zhang, A., Du, W., Zhang, W., Lee, T. L., Xiong, S., & Mi, J. (2021). 3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography. Materials, 14(3), Article 520. https://doi.org/10.3390/ma14030520

© 2021 by the authors. Licensee MDPI, Basel, Switzerland. In this paper, the dynamics of multi-dendrite concurrent growth and coarsening of an Al-15 wt.% Cu alloy was studied using a highly computationally efficient 3D phase field model and real-time... Read More about 3D phase field modeling of multi-dendrites evolution in solidification and validation by synchrotron x-ray tomography.

Comparison of performance of alternative post combustion carbon capture processes for a biogas fueled micro gas turbine (2021)
Presentation / Conference Contribution
Font-Palma, C., Lychnos, G., Somehsaraei, H. N., Willson, P., & Assadi, M. (2020, September). Comparison of performance of alternative post combustion carbon capture processes for a biogas fueled micro gas turbine. Presented at ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition

Copyright © 2020 ASME The urgent need to decrease greenhouse gases (GHG) has prompted countries such as the UK and Norway to commit to net zero emissions by 2050 and 2030, respectively. One of the sectors contributing to GHG emissions is agriculture,... Read More about Comparison of performance of alternative post combustion carbon capture processes for a biogas fueled micro gas turbine.

Smart windows – Transmittance tuned thermochromic coatings for dynamic control of building performance (2021)
Journal Article
Aburas, M., Ebendorff-Heidepriem, H., Lei, L., Li, M., Zhao, J., Williamson, T., …Soebarto, V. (2021). Smart windows – Transmittance tuned thermochromic coatings for dynamic control of building performance. Energy and Buildings, 235, Article 110717. https://doi.org/10.1016/j.enbuild.2021.110717

Thermochromic window technologies promise energy-saving capabilities through intelligent regulation of solar irradiation indoor penetration. Although improvements have been made, nanoparticle thermochromic coated glazing technology has not yet achiev... Read More about Smart windows – Transmittance tuned thermochromic coatings for dynamic control of building performance.

Design and analysis of a novel dual source vapor injection heat pump using exhaust and ambient air (2020)
Journal Article
Li, J., Fan, Y., Zhao, X., Bai, X., Zhou, J., Badiei, A., Myers, S., & Ma, X. (2021). Design and analysis of a novel dual source vapor injection heat pump using exhaust and ambient air. Energy and Built Environment, https://doi.org/10.1016/j.enbenv.2020.11.004

A novel dual source vapor injection heat pump (DSVIHP) using exhaust and ambient air is proposed. The air exhausted from the building first releases energy to the medium-pressure evaporator and is then mixed with the ambient air to heat the low-press... Read More about Design and analysis of a novel dual source vapor injection heat pump using exhaust and ambient air.

The biomechanical role of the chondrocranium and the material properties of cartilage (2020)
Journal Article
Jones, M. E. H., Gröning, F., Aspden, R. M., Dutel, H., Sharp, A., Moazen, M., Fagan, M. J., & Evans, S. E. (2020). The biomechanical role of the chondrocranium and the material properties of cartilage. Vertebrate Zoology, 70(4), 699-715. https://doi.org/10.26049/VZ70-4-2020-10

The chondrocranium is the cartilage component of the vertebrate braincase. Among jawed vertebrates it varies greatly in structure, mineralisation, and in the extent to which it is replaced by bone during development. In mammals, birds, and some bony... Read More about The biomechanical role of the chondrocranium and the material properties of cartilage.

The status of hydrogen technologies in the UK: A multi-disciplinary review (2020)
Journal Article
Edwards, R. L., Font-Palma, C., & Howe, J. (2021). The status of hydrogen technologies in the UK: A multi-disciplinary review. Sustainable Energy Technologies and Assessments an international journal, 43, Article 100901. https://doi.org/10.1016/j.seta.2020.100901

Hydrogen has the potential to offer deep decarbonisation across a range of global heavy-emitting sectors. To have an impact on the global energy system, hydrogen technologies must be deployed with greater urgency. This review article facilitates the... Read More about The status of hydrogen technologies in the UK: A multi-disciplinary review.

A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant (2020)
Journal Article
Michailos, S., Walker, M., Moody, A., Poggio, D., & Pourkashanian, M. (2021). A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant. Journal of Environmental Chemical Engineering, 9(1), Article 104735. https://doi.org/10.1016/j.jece.2020.104735

The aim of the present study is to assess the techno-economic viability of integrating biomethanation into power to gas systems in a real waste water treatment plant (WWTP). The research is the first attempt to assess the viability of several scenari... Read More about A techno-economic assessment of implementing power-to-gas systems based on biomethanation in an operating waste water treatment plant.

Viscoelastically active sutures – A stitch in time? (2020)
Journal Article
France, L. A., & Fancey, K. S. (2021). Viscoelastically active sutures – A stitch in time?. Materials Science and Engineering: C, 121, Article 111695. https://doi.org/10.1016/j.msec.2020.111695

We present results to show that a commercially available polypropylene suture filament (Ethicon Prolene), following annealing and tensile creep can, after creep load removal, release viscoelastically stored energy over a period of several weeks. Spec... Read More about Viscoelastically active sutures – A stitch in time?.

Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography (2020)
Journal Article
Zhang, Z., Khong, J. C., Koe, B., Luo, S., Huang, S., Qin, L., Cipiccia, S., Batey, D., Bodey, A. J., Rau, C., Chiu, Y. L., Zhang, Z., Gebelin, J. C., Green, N., & Mi, J. (2021). Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography. Scripta materialia, 193, 71-76. https://doi.org/10.1016/j.scriptamat.2020.10.032

Synchrotron X-ray microtomography and ptychography were used to characterize the 3D network structure, morphology and distribution of metal carbides in an as-cast IN713LC Ni superalloy. MC typed carbides were found to distribute mainly on the grain b... Read More about Multiscale characterization of the 3D network structure of metal carbides in a Ni superalloy by synchrotron X-ray microtomography and ptychography.

Hourly performance forecast of a dew point cooler using explainable Artificial Intelligence and evolutionary optimisations by 2050 (2020)
Journal Article
Golizadeh Akhlaghi, Y., Aslansefat, K., Zhao, X., Sadati, S., Badiei, A., Xiao, X., Shittu, S., Fan, Y., & Ma, X. (2021). Hourly performance forecast of a dew point cooler using explainable Artificial Intelligence and evolutionary optimisations by 2050. Applied energy, 281, Article 116062. https://doi.org/10.1016/j.apenergy.2020.116062

The empirical success of the Artificial Intelligence (AI), has enhanced importance of the transparency in black box Machine Learning (ML) models. This study pioneers in developing an explainable and interpretable Deep Neural Network (DNN) model for a... Read More about Hourly performance forecast of a dew point cooler using explainable Artificial Intelligence and evolutionary optimisations by 2050.

In-situ measurement and prediction of traffic noise transmission loss across a residential flat unit façade installed with two plenum windows (2020)
Presentation / Conference Contribution
Tang, S. K., & Li, X. (2020). In-situ measurement and prediction of traffic noise transmission loss across a residential flat unit façade installed with two plenum windows. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings 2020 (1368-1375)

In the present study, the traffic noise transmission loss across a residential flat unit façade installed with two plenum windows are measured in-situ in a 30-storey high-rise building located in an opened environment next to a very busy and noisy ma... Read More about In-situ measurement and prediction of traffic noise transmission loss across a residential flat unit façade installed with two plenum windows.

Esterification of residual palm oil using solid acid catalyst derived from rice husk (2020)
Journal Article
Semilin, V., Balan, W. S., Janaun, J., Chung, C. H., Zhu, Z., Haywood, S. K., Touhami, D., Chong, K. P., Yaser, A. Z., Lee, P. C., & Zein, S. H. (2021). Esterification of residual palm oil using solid acid catalyst derived from rice husk. Journal of hazardous materials, 404(Part B), Article 124092. https://doi.org/10.1016/j.jhazmat.2020.124092

In this study, carbon-silica based acid catalysts derived from rice husks (RH) were successfully synthesised using microwave (MW) technology. The results showed that MW sulphonation produced Sulphur (S) content of 17.2–18.5 times higher than in raw R... Read More about Esterification of residual palm oil using solid acid catalyst derived from rice husk.

Noise reduction of plenum windows on the façade of a high-rise residential building next to heavy road traffic (2020)
Journal Article
Li, X., Tang, S. K., Yim, S. Y., Lee, R. Y., & Hung, T. (2020). Noise reduction of plenum windows on the façade of a high-rise residential building next to heavy road traffic. Building and Environment, 186, Article 107353. https://doi.org/10.1016/j.buildenv.2020.107353

Extensive traffic noise transmission loss measurements were carried out inside selected residential units of a standalone 32-storey housing block located next to a very busy and noisy main trunk road in the present study. A total of 35 units, which w... Read More about Noise reduction of plenum windows on the façade of a high-rise residential building next to heavy road traffic.

Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber (2020)
Journal Article
Semilin, V., Janaun, J., Chung, C. H., Touhami, D., Haywood, S. K., Chong, K. P., Yaser, A. Z., & Zein, S. H. (2021). Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber. Journal of hazardous materials, 404, Article 124144. https://doi.org/10.1016/j.jhazmat.2020.124144

Residual palm oil that goes into the river untreated can become detrimental to the environment. Residual oil discharge during milling process into palm oil mill effluent (POME) is unavoidable. About 1 wt% of residual oil in POME causes major problems... Read More about Recovery of oil from palm oil mill effluent using polypropylene micro/nanofiber.