Skip to main content

Research Repository

Advanced Search

Outputs (593)

Electron hopping rate measurements in ITO junctions: charge diffusion in a layer-by-layer deposited ruthenium(II)-bis(benzimidazolyl)pyridine-phosphonate- TiO2 film (2011)
Journal Article
Cummings, C. Y., Wadhawan, J. D., Nakabayashi, T., Haga, M. A., Rassaei, L., Dale, S. E., Bending, S., Pumera, M., Parker, S. C., & Marken, F. (2011). Electron hopping rate measurements in ITO junctions: charge diffusion in a layer-by-layer deposited ruthenium(II)-bis(benzimidazolyl)pyridine-phosphonate- TiO2 film. Journal of Electroanalytical Chemistry, 657(1-2), 196-201. https://doi.org/10.1016/j.jelechem.2011.04.010

Focused ion beam (FIB) machining allowed a sub-micron trench to be cut through tin-doped indium oxide (ITO) film on glass to give a generator - collector junction electrode with narrow gap (ca. 600 nm). A layer-by-layer deposited film composed of a d... Read More about Electron hopping rate measurements in ITO junctions: charge diffusion in a layer-by-layer deposited ruthenium(II)-bis(benzimidazolyl)pyridine-phosphonate- TiO2 film.

Synthesis of a TiO2 ceramic membrane containing SrCo 0.8Fe0.2O3 by the sol-gel method with a wet impregnation process for O2 and N2 permeation (2011)
Journal Article
Ahmad, A. L., Abdullah Sani, N. A., & Sharif Zein, S. H. (2011). Synthesis of a TiO2 ceramic membrane containing SrCo 0.8Fe0.2O3 by the sol-gel method with a wet impregnation process for O2 and N2 permeation. Ceramics international, 37(8), 2981-2989. https://doi.org/10.1016/j.ceramint.2011.03.036

A SrCo0.8Fe0.2O3 impregnated TiO2 membrane (TiO2–SrCo0.8Fe0.2O3 membrane) was successfully prepared using a sol–gel method in combination with a wet impregnation process. The membrane was subjected to a single gas permeance test using oxygen (O2) and... Read More about Synthesis of a TiO2 ceramic membrane containing SrCo 0.8Fe0.2O3 by the sol-gel method with a wet impregnation process for O2 and N2 permeation.

Biphasic voltammetry of N, N, N ', N '-tetraphenyl-para-phenylenediamine microdroplets, microparticles and microparticle suspensions (2011)
Journal Article
Halls, J. E., & Wadhawan, J. D. (2011). Biphasic voltammetry of N, N, N ', N '-tetraphenyl-para-phenylenediamine microdroplets, microparticles and microparticle suspensions. Electroanalysis, 23(4), 997-1006. https://doi.org/10.1002/elan.201000633

The aqueous biphasic voltammetry of the title compound is examined when it is immobilised on an electrode surface either when dissolved in an array of nitrobenzene droplets, in the form of solid microparticles, or when an electrode is immersed into a... Read More about Biphasic voltammetry of N, N, N ', N '-tetraphenyl-para-phenylenediamine microdroplets, microparticles and microparticle suspensions.

MnO2-filled multiwalled carbon nanotube/polyaniline nanocomposites: Effect of loading on the conduction properties and its percolation threshold (2011)
Journal Article
Abd Razak, S. I., Sharif Zein, S. H., & Ahmad, A. L. (2011). MnO2-filled multiwalled carbon nanotube/polyaniline nanocomposites: Effect of loading on the conduction properties and its percolation threshold. Nano, 06(01), 81-91. https://doi.org/10.1142/S1793292011002378

This paper reports the synthesis and characterization of ternary nanocomposites consisting of polyaniline (PANI), multiwalled carbon nanotubes (MWCNTs) and manganese dioxide (MnO2) at different MWCNT–MnO2 loadings. The composite electrical percolatio... Read More about MnO2-filled multiwalled carbon nanotube/polyaniline nanocomposites: Effect of loading on the conduction properties and its percolation threshold.

Wave propagation in stereo-lithographical (STL) bone replicas at oblique incidence (2011)
Journal Article
Aygün, H., Attenborough, K., Lauriks, W., Rubini, P. A., & Langton, C. M. (2011). Wave propagation in stereo-lithographical (STL) bone replicas at oblique incidence. Applied acoustics. Acoustique appliqué. Angewandte Akustik, 72(7), 458-463. https://doi.org/10.1016/j.apacoust.2011.01.010

Comparisons between predictions of a Biot-Allard model allowing for angle-dependent elasticity and angle-and-porosity dependent tortuosity and transmission data obtained at normal incidence on water-saturated replica bones are extended to oblique inc... Read More about Wave propagation in stereo-lithographical (STL) bone replicas at oblique incidence.

Sustainable management of energy crops for integrated biofuels and green energy production in Greece (2011)
Journal Article
Skoulou, V., Mariolis, N., Zanakis, G., & Zabaniotou, A. (2011). Sustainable management of energy crops for integrated biofuels and green energy production in Greece. Renewable & sustainable energy reviews, 15(4), 1928-1936. https://doi.org/10.1016/j.rser.2010.12.019

The present work deals with the assessment of the sustainability and integrated management of four energy crops and their residues, in Greece. Pilot agronomic experiments were performed by cultivating cotton, sunflower, soya and rapeseed for the esti... Read More about Sustainable management of energy crops for integrated biofuels and green energy production in Greece.

Optimization of the mechanical properties of calcium phosphate/multi-walled carbon nanotubes/bovine serum albumin composites using response surface methodology (2011)
Journal Article
Low, K. L., Tan, S. H., Zein, S. H. S., McPhail, D. S., & Boccaccini, A. R. (2011). Optimization of the mechanical properties of calcium phosphate/multi-walled carbon nanotubes/bovine serum albumin composites using response surface methodology. Materials and Design, 32(6), 3312-3319. https://doi.org/10.1016/j.matdes.2011.02.022

Response surface methodology (RSM) coupled with the central composite design (CCD) was used to optimize the mechanical properties of calcium phosphate cement/multi-walled carbon nanotubes/bovine serum albumin (CPC/MWCNTs/BSA) composites. In this stud... Read More about Optimization of the mechanical properties of calcium phosphate/multi-walled carbon nanotubes/bovine serum albumin composites using response surface methodology.

Effect of para-hydroxybenzene sulfonic acid on the properties of ine/multiwalled carbon nanotubes-MnO2 (2010)
Journal Article
Razak, S. I. A., Zein, S. H. S., & Ahmad, A. L. (2010). Effect of para-hydroxybenzene sulfonic acid on the properties of ine/multiwalled carbon nanotubes-MnO2. Nano, 5(6), 369-373. https://doi.org/10.1142/S1793292010002293

New ex situ polyaniline (PANI)/MnO 2 -filled multiwalled carbon nanotubes (MWCNTs) nanocomposites using para-hydroxybenzene sulfonic acid (PHBSA) as a dopant and linker exhibit enhanced electrical conductivity and interfacial interaction. Strong and... Read More about Effect of para-hydroxybenzene sulfonic acid on the properties of ine/multiwalled carbon nanotubes-MnO2.

Modelling of light extinction by soot particles (2010)
Journal Article
Zhang, Q., & Rubini, P. A. (2011). Modelling of light extinction by soot particles. Fire Safety Journal, 46(3), 96-103. https://doi.org/10.1016/j.firesaf.2010.11.002

A simplified model for the prediction of light extinction through combustion generated smoke is presented. The model builds upon existing theory and available experimental data to account for the principal factors that influence light extinction in p... Read More about Modelling of light extinction by soot particles.

Poly(3-hydroxybutyrate)-functionalised multi-walled carbon nanotubes/chitosan green nanocomposite membranes and their application in pervaporation (2010)
Journal Article
Ong, Y. T., Ahmad, A. L., Zein, S. H. S., Sudesh, K., & Tan, S. H. (2011). Poly(3-hydroxybutyrate)-functionalised multi-walled carbon nanotubes/chitosan green nanocomposite membranes and their application in pervaporation. Separation and purification technology, 76(3), 419-427. https://doi.org/10.1016/j.seppur.2010.11.013

The aim of this research was to align poly(3-hydroxybutyrate) (PHB)-functionalised multi-walled carbon nanotubes (MWCNTs) into a chitosan matrix. The MWCNTs were first functionalised with PHB and aligned into a membrane filter template through a filt... Read More about Poly(3-hydroxybutyrate)-functionalised multi-walled carbon nanotubes/chitosan green nanocomposite membranes and their application in pervaporation.