Skip to main content

Research Repository

Advanced Search

Investigating oxygen transport efficiencies in precision-cut liver slice-based organ-on-a-chip devices

Christensen, Martin G.; Cawthorne, Chris; Dyer, Charlotte E.; Greenman, John; Pamme, Nicole

Authors

Martin G. Christensen

Chris Cawthorne

Nicole Pamme



Abstract

Microfluidic ‘organ-on-a-chip’ devices hold great potential for better mimicking the continuous flow microenvironment experienced by tissue and cells in vivo, thereby ensuring realistic transport of nutrients and elimination of waste products. However, the mass transport of oxygen, which arguably is the most critical nutrient due to its inherently low solubility in water, is rarely assessed. To this aim, the suitability of various precision-cut liver slice (PCLS) microfluidic devices for the defined maintenance of oxygen mass transport were evaluated using COMSOL simulations, leading to the development of a novel, optimised design to provide defined in vivo oxygenation conditions within an organ-on-a-chip system. Simulations found that the proposed device was capable of maintaining 43% of the tissue slice volume within the physiological range of the liver against 18% for the best performing literature device. The optimal device architecture derived from the modelling was then fabricated and its operation confirmed with an LDH assay. These simulation results form the basis for a greater understanding of not just the challenges involved in designing organ-on-a-chip devices, but also highlight issues that would arise from the incorporation of additional organs, as research progresses towards complete human-on-a-chip model systems.

Citation

Christensen, M. G., Cawthorne, C., Dyer, C. E., Greenman, J., & Pamme, N. (2021). Investigating oxygen transport efficiencies in precision-cut liver slice-based organ-on-a-chip devices. Microfluidics and Nanofluidics, 25(4), Article 35. https://doi.org/10.1007/s10404-021-02434-x

Journal Article Type Article
Acceptance Date Mar 1, 2021
Online Publication Date Mar 23, 2021
Publication Date 2021-04
Deposit Date Mar 24, 2021
Publicly Available Date Mar 25, 2021
Journal Microfluidics and Nanofluidics
Print ISSN 1613-4982
Electronic ISSN 1613-4990
Publisher Springer Verlag
Peer Reviewed Peer Reviewed
Volume 25
Issue 4
Article Number 35
DOI https://doi.org/10.1007/s10404-021-02434-x
Keywords Organ-on-chip; Liver metabolism; Oxygen tension; COMSOL modelling
Public URL https://hull-repository.worktribe.com/output/3744443

Files

Supplementary information (5 Mb)
PDF

Copyright Statement
© The Author(s) 2021. Open Access. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.


Published article (3.9 Mb)
PDF

Copyright Statement
© The Author(s) 2021. Open Access. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.







You might also like



Downloadable Citations