Professor Bernie Binks' Outputs (152)

Membrane permeation of testosterone from either solutions, particle dispersions, or particle-stabilized emulsions (2012)
Journal Article
Elliott, R. P., Johnson, A. J., Fletcher, P. D. I., & Binks, B. P. (2012). Membrane permeation of testosterone from either solutions, particle dispersions, or particle-stabilized emulsions. Langmuir : the ACS journal of surfaces and colloids, 28(5), 2510-2522. https://doi.org/10.1021/la204755m

We derive a unified model that accounts for the variation in extent and rate of membrane permeation by a permeating species with the type of donor compartment formulation (aqueous and oil solutions, particle dispersions, and oil-in-water and water-in... Read More about Membrane permeation of testosterone from either solutions, particle dispersions, or particle-stabilized emulsions.

Oil Powders and Gels from Particle-Stabilized Emulsions (2012)
Journal Article
Adelmann, H., Binks, B. P., & Mezzenga, R. (2012). Oil Powders and Gels from Particle-Stabilized Emulsions. Langmuir : the ACS journal of surfaces and colloids, 28(3), 1694-1697. https://doi.org/10.1021/la204811c

We report on the use of silica particle-stabilized oil-in-water emulsions as a template for the preparation of oil powders and gels obtained in a single step by either slow or rapid evaporation of water using freeze-drying or spray-drying, respective... Read More about Oil Powders and Gels from Particle-Stabilized Emulsions.

Particle stabilization of oil-in-water-in-air materials: Powdered emulsions (2012)
Journal Article
Murakami, R., Moriyama, H., Yamamoto, M., Binks, B. P., & Rocher, A. (2012). Particle stabilization of oil-in-water-in-air materials: Powdered emulsions. Advanced materials, 24(6), 767-771. https://doi.org/10.1002/adma.201104089

Drops of a particle-stabilised oil-in-water emulsion are encapsulated in air by using hydrophobic silica particles. Such systems, termed oil-in-water-in-air powdered emulsions, show free-flowing behavior. Successful preparation of the material is ach... Read More about Particle stabilization of oil-in-water-in-air materials: Powdered emulsions.

Multiple phase inversion of emulsions stabilized by in situ surface activation of CaCO3 Nanoparticles via Adsorption of Fatty Acids (2011)
Journal Article
Cui, Z. .-G., Cui, C. .-F., Zhu, Y., & Binks, B. P. (2012). Multiple phase inversion of emulsions stabilized by in situ surface activation of CaCO3 Nanoparticles via Adsorption of Fatty Acids. Langmuir : the ACS journal of surfaces and colloids, 28(1), 314-320. https://doi.org/10.1021/la204021v

The in situ surface activation of raw CaCO3 nanoparticles by interaction with a series of sodium carboxylates of chain length between 6 and 12 as well as sodium 2-ethylhexylsulfosuccinate (AOT) was studied, and the impact of this on the stabilization... Read More about Multiple phase inversion of emulsions stabilized by in situ surface activation of CaCO3 Nanoparticles via Adsorption of Fatty Acids.

Pickering emulsions stabilized by surface-modified Fe3O4 nanoparticles (2011)
Journal Article
Zhou, J., Wang, L., Qiao, X., Binks, B. P., & Sun, K. (2012). Pickering emulsions stabilized by surface-modified Fe3O4 nanoparticles. Journal of colloid and interface science, 367(1), 213-224. https://doi.org/10.1016/j.jcis.2011.11.001

Unmodified Fe 3 O 4 nanoparticles do not stabilize Pickering emulsions of a polar oil like butyl butyrate. In order to obtain stable emulsions, the Fe 3 O 4 nanoparticles were modified by either carboxylic acid (RCOOH) or silane coupling agents (RSi(... Read More about Pickering emulsions stabilized by surface-modified Fe3O4 nanoparticles.

Effect of added diols (glycols) on the emulsion properties of oil, water and surfactant mixtures (2011)
Journal Article
Binks, B. P., Fletcher, P. D., Thompson, M. A., & Elliott, R. P. (2011). Effect of added diols (glycols) on the emulsion properties of oil, water and surfactant mixtures. Colloids and surfaces. A, Physicochemical and engineering aspects, 390(1-3), 67-73. https://doi.org/10.1016/j.colsurfa.2011.09.005

We have investigated the effects of addition of various diols on the properties of water–paraffin emulsions stabilised by non-ionic surfactants. Diols do not partition to the oil phase of these emulsions to any significant extent. Diol addition cause... Read More about Effect of added diols (glycols) on the emulsion properties of oil, water and surfactant mixtures.

In vitro gene expression and enzyme catalysis in bio-inorganic protocells (2011)
Journal Article
Li, M., Green, D. C., Anderson, J. L. R., Binks, B. P., & Mann, S. (2011). In vitro gene expression and enzyme catalysis in bio-inorganic protocells. Chemical science, 2(9), 1739-1745. https://doi.org/10.1039/c1sc00183c

Silica nanoparticles with a balance of hydrophilic and hydrophobic surface properties exhibit surfactant-like behaviour, and as a consequence can strongly adsorb at oil/water interfaces to stabilize the formation of water micro-droplets. Here we expl... Read More about In vitro gene expression and enzyme catalysis in bio-inorganic protocells.

Inversion of particle-stabilized emulsions of partially miscible liquids by mild drying of modified silica particles (2011)
Journal Article
White, K. A., Schofield, A. B., Wormald, P., Tavacoli, J. W., Clegg, P. S., & Binks, B. P. (2011). Inversion of particle-stabilized emulsions of partially miscible liquids by mild drying of modified silica particles. Journal of colloid and interface science, 359(1), 126-135. https://doi.org/10.1016/j.jcis.2011.03.074

Using a system of modified silica particles and mixtures of water and 2,6-lutidine to form particle-stabilized emulsions, we show that subtle alterations to the hydration of the particle surface can cause major shifts in emulsion structure. We use fl... Read More about Inversion of particle-stabilized emulsions of partially miscible liquids by mild drying of modified silica particles.

Liquid marbles stabilized by graphite particles from aqueous surfactant solutions (2011)
Journal Article
Doganci, M. D., Sesli, B. U., Erbil, H. Y., Salama, I. E., & Binks, B. P. (2011). Liquid marbles stabilized by graphite particles from aqueous surfactant solutions. Colloids and surfaces. A, Physicochemical and engineering aspects, 384(1-3), 417-426. https://doi.org/10.1016/j.colsurfa.2011.04.027

When a hydrophobic powder encapsulates a liquid drop, it forms a liquid marble which is non-wetting and behaves as a micro-reservoir of the liquid able to move without any leakage. In this work, we successfully prepared liquid marbles by encapsulatin... Read More about Liquid marbles stabilized by graphite particles from aqueous surfactant solutions.

Particles at fluid interfaces : behaviour and derived materials (2011)
Thesis
Rocher, A. Particles at fluid interfaces : behaviour and derived materials. (Thesis). University of Hull. https://hull-repository.worktribe.com/output/4212793

The objectives of this thesis are to enhance the understanding of the particle behaviour at fluid interfaces using novel and stimuli responsive particles, and how their adsorption at these interfaces affect the emulsions, foams or other materials tha... Read More about Particles at fluid interfaces : behaviour and derived materials.

Influence of the contact angle of silica nanoparticles at the air–water interface on the mechanical properties of the layers composed of these particles (2011)
Journal Article
Zang, D., Rio, E., Delon, G., Langevin, D., Wei, B., & Binks, B. (2011). Influence of the contact angle of silica nanoparticles at the air–water interface on the mechanical properties of the layers composed of these particles. Molecular Physics, 109(7-10), 1057-1066. https://doi.org/10.1080/00268976.2010.542778

We have studied the properties (surface pressure, compression and shear moduli, texture) of silica nanoparticle layers at the air-water interface. Particle hydrophobicity or, equivalently, the contact angle between particles, air and water, is the ma... Read More about Influence of the contact angle of silica nanoparticles at the air–water interface on the mechanical properties of the layers composed of these particles.

Sporopollenin capsules at fluid interfaces: Particle-stabilised emulsions and liquid marbles (2011)
Journal Article
Binks, B., Boa, A. N., Kibble, M. A., MacKenzie, G., & Rocher, A. (2011). Sporopollenin capsules at fluid interfaces: Particle-stabilised emulsions and liquid marbles. Soft matter, 7(8), 4017-4024. https://doi.org/10.1039/c0sm01516d

Hollow particles of sporopollenin from spores of the plant Lycopodium clavatum have been prepared. These particles possess ionisable groups on their surface such that they become increasingly negatively charged with an increase in pH. The particles a... Read More about Sporopollenin capsules at fluid interfaces: Particle-stabilised emulsions and liquid marbles.

Magnetic Pickering emulsions stabilized by Fe3O4 nanoparticles (2011)
Journal Article
Zhou, J., Qiao, X., Binks, B. P., Sun, K., Bai, M., Li, Y., & Liu, Y. (2011). Magnetic Pickering emulsions stabilized by Fe3O4 nanoparticles. Langmuir : the ACS journal of surfaces and colloids, 27(7), 3308-3316. https://doi.org/10.1021/la1036844

Superparamagnetic Fe3O4 nanoparticles prepared by a classical coprecipitation method were used as the stabilizer to prepare magnetic Pickering emulsions, and the effects of particle concentration, oil/water volume ratio, and oil polarity on the type,... Read More about Magnetic Pickering emulsions stabilized by Fe3O4 nanoparticles.

Aqueous foams stabilized solely by particles (2011)
Journal Article
Stocco, A., Rio, E., Binks, B. P., & Langevin, D. (2011). Aqueous foams stabilized solely by particles. Soft matter, 7(4), 1260-1267. https://doi.org/10.1039/c0sm01290d

Foams are dispersions of bubbles in liquids, often water. They are frequently stabilized by surfactant or polymer, but like Pickering emulsions, they can be also stabilized solely by particles. If the particles have a moderate hydrophobicity, the foa... Read More about Aqueous foams stabilized solely by particles.

Surfactant properties of corrosion inhibitors (2011)
Thesis
El Moaty, I. S. Surfactant properties of corrosion inhibitors. (Thesis). University of Hull. https://hull-repository.worktribe.com/output/4213043

Corrosion is one of the most common, costly and widespread industrial problems in the oil and gas production industry. Surfactant addition is one of many ways to inhibit the corrosion of metals, especially on hard-to-reach surfaces such as the inside... Read More about Surfactant properties of corrosion inhibitors.

The fate of oilfield corrosion inhibitors in multiphase systems (2010)
Presentation / Conference Contribution
Horsup, D. I., Clark, J. C., Binks, B. P., Fletcher, P. D. I., & Hicks, J. T. The fate of oilfield corrosion inhibitors in multiphase systems

Corrosion inhibitors have been used for many years to protect oil and gas pipelines, The application of small quantifies of an inhibitor to production fluids is often one of the most cost-effective methods for, imparting corrosion protection in a sys... Read More about The fate of oilfield corrosion inhibitors in multiphase systems.

Oil foams stabilised solely by particles (2010)
Journal Article
Binks, B. P., Rocher, A., & Kirkland, M. (2011). Oil foams stabilised solely by particles. Soft matter, 7(5), 1800-1808. https://doi.org/10.1039/c0sm01129k

The influence of the surface tension of the liquid (γla) on the material formed upon aerating mixtures of the liquid and fluoroethylene particles is investigated. For non-polar oils of relatively low tension, an oil dispersion of particles is formed... Read More about Oil foams stabilised solely by particles.

Quantitative prediction of the reduction of corrosion inhibitor effectiveness due to parasitic adsorption onto a competitor surface (2010)
Journal Article
Binks, B. P., Fletcher, P. D. I., Salama, I. E., Horsup, D. I., & Moore, J. A. (2011). Quantitative prediction of the reduction of corrosion inhibitor effectiveness due to parasitic adsorption onto a competitor surface. Langmuir : the ACS journal of surfaces and colloids, 27(1), 469-473. https://doi.org/10.1021/la103570e

We have investigated how the effectiveness of a corrosion inhibitor added to an aqueous solution to suppress the corrosion rate of steel is reduced by the addition of sand. The equilibrium adsorption isotherms of the inhibitor with respect to both th... Read More about Quantitative prediction of the reduction of corrosion inhibitor effectiveness due to parasitic adsorption onto a competitor surface.

Selective retardation of perfume oil evaporation from oil-in-water emulsions stabilized by either surfactant or nanoparticles (2010)
Journal Article
Binks, B. P., Fletcher, P. D., Holt, B. L., Beaussoubre, P., & Wong, K. (2010). Selective retardation of perfume oil evaporation from oil-in-water emulsions stabilized by either surfactant or nanoparticles. Langmuir : the ACS journal of surfaces and colloids, 26(23), 18024-18030. https://doi.org/10.1021/la103700g

We have used dynamic headspace analysis to investigate the evaporation rates of perfume oils from stirred oil-in-water emulsions into a flowing gas stream. We compare the behavior of an oil of low water solubility (limonene) and one of high water sol... Read More about Selective retardation of perfume oil evaporation from oil-in-water emulsions stabilized by either surfactant or nanoparticles.

Phase inversion of particle-stabilised perfume oil-water emulsions: experiment and theory (2010)
Journal Article
Binks, B. P., Fletcher, P. D. I., Holt, B. L., Beaussoubre, P., & Wong, K. (2010). Phase inversion of particle-stabilised perfume oil-water emulsions: experiment and theory. Physical chemistry chemical physics : PCCP, 12(38), 11954-11966. https://doi.org/10.1039/c0cp00558d

Phase inversion of fumed silica particle-stabilised emulsions of water and perfume oil can be effected in three ways. The transitional inversion from water-in-oil (w/o) to oil-in-water (o/w) occurs upon increasing the particle hydrophilicity for 9 oi... Read More about Phase inversion of particle-stabilised perfume oil-water emulsions: experiment and theory.