Professor Bernie Binks' Outputs (161)

Sporopollenin capsules at fluid interfaces: Particle-stabilised emulsions and liquid marbles (2011)
Journal Article
Binks, B., Boa, A. N., Kibble, M. A., MacKenzie, G., & Rocher, A. (2011). Sporopollenin capsules at fluid interfaces: Particle-stabilised emulsions and liquid marbles. Soft matter, 7(8), 4017-4024. https://doi.org/10.1039/c0sm01516d

Hollow particles of sporopollenin from spores of the plant Lycopodium clavatum have been prepared. These particles possess ionisable groups on their surface such that they become increasingly negatively charged with an increase in pH. The particles a... Read More about Sporopollenin capsules at fluid interfaces: Particle-stabilised emulsions and liquid marbles.

Magnetic Pickering emulsions stabilized by Fe3O4 nanoparticles (2011)
Journal Article
Zhou, J., Qiao, X., Binks, B. P., Sun, K., Bai, M., Li, Y., & Liu, Y. (2011). Magnetic Pickering emulsions stabilized by Fe3O4 nanoparticles. Langmuir : the ACS journal of surfaces and colloids, 27(7), 3308-3316. https://doi.org/10.1021/la1036844

Superparamagnetic Fe3O4 nanoparticles prepared by a classical coprecipitation method were used as the stabilizer to prepare magnetic Pickering emulsions, and the effects of particle concentration, oil/water volume ratio, and oil polarity on the type,... Read More about Magnetic Pickering emulsions stabilized by Fe3O4 nanoparticles.

Aqueous foams stabilized solely by particles (2011)
Journal Article
Stocco, A., Rio, E., Binks, B. P., & Langevin, D. (2011). Aqueous foams stabilized solely by particles. Soft matter, 7(4), 1260-1267. https://doi.org/10.1039/c0sm01290d

Foams are dispersions of bubbles in liquids, often water. They are frequently stabilized by surfactant or polymer, but like Pickering emulsions, they can be also stabilized solely by particles. If the particles have a moderate hydrophobicity, the foa... Read More about Aqueous foams stabilized solely by particles.

Surfactant properties of corrosion inhibitors (2011)
Thesis
El Moaty, I. S. Surfactant properties of corrosion inhibitors. (Thesis). University of Hull. https://hull-repository.worktribe.com/output/4213043

Corrosion is one of the most common, costly and widespread industrial problems in the oil and gas production industry. Surfactant addition is one of many ways to inhibit the corrosion of metals, especially on hard-to-reach surfaces such as the inside... Read More about Surfactant properties of corrosion inhibitors.

The fate of oilfield corrosion inhibitors in multiphase systems (2010)
Presentation / Conference Contribution
Horsup, D. I., Clark, J. C., Binks, B. P., Fletcher, P. D. I., & Hicks, J. T. The fate of oilfield corrosion inhibitors in multiphase systems

Corrosion inhibitors have been used for many years to protect oil and gas pipelines, The application of small quantifies of an inhibitor to production fluids is often one of the most cost-effective methods for, imparting corrosion protection in a sys... Read More about The fate of oilfield corrosion inhibitors in multiphase systems.

Oil foams stabilised solely by particles (2010)
Journal Article
Binks, B. P., Rocher, A., & Kirkland, M. (2011). Oil foams stabilised solely by particles. Soft matter, 7(5), 1800-1808. https://doi.org/10.1039/c0sm01129k

The influence of the surface tension of the liquid (γla) on the material formed upon aerating mixtures of the liquid and fluoroethylene particles is investigated. For non-polar oils of relatively low tension, an oil dispersion of particles is formed... Read More about Oil foams stabilised solely by particles.

Quantitative prediction of the reduction of corrosion inhibitor effectiveness due to parasitic adsorption onto a competitor surface (2010)
Journal Article
Binks, B. P., Fletcher, P. D. I., Salama, I. E., Horsup, D. I., & Moore, J. A. (2011). Quantitative prediction of the reduction of corrosion inhibitor effectiveness due to parasitic adsorption onto a competitor surface. Langmuir : the ACS journal of surfaces and colloids, 27(1), 469-473. https://doi.org/10.1021/la103570e

We have investigated how the effectiveness of a corrosion inhibitor added to an aqueous solution to suppress the corrosion rate of steel is reduced by the addition of sand. The equilibrium adsorption isotherms of the inhibitor with respect to both th... Read More about Quantitative prediction of the reduction of corrosion inhibitor effectiveness due to parasitic adsorption onto a competitor surface.

Selective retardation of perfume oil evaporation from oil-in-water emulsions stabilized by either surfactant or nanoparticles (2010)
Journal Article
Binks, B. P., Fletcher, P. D., Holt, B. L., Beaussoubre, P., & Wong, K. (2010). Selective retardation of perfume oil evaporation from oil-in-water emulsions stabilized by either surfactant or nanoparticles. Langmuir : the ACS journal of surfaces and colloids, 26(23), 18024-18030. https://doi.org/10.1021/la103700g

We have used dynamic headspace analysis to investigate the evaporation rates of perfume oils from stirred oil-in-water emulsions into a flowing gas stream. We compare the behavior of an oil of low water solubility (limonene) and one of high water sol... Read More about Selective retardation of perfume oil evaporation from oil-in-water emulsions stabilized by either surfactant or nanoparticles.

Phase inversion of particle-stabilised perfume oil-water emulsions: experiment and theory (2010)
Journal Article
Binks, B. P., Fletcher, P. D. I., Holt, B. L., Beaussoubre, P., & Wong, K. (2010). Phase inversion of particle-stabilised perfume oil-water emulsions: experiment and theory. Physical chemistry chemical physics : PCCP, 12(38), 11954-11966. https://doi.org/10.1039/c0cp00558d

Phase inversion of fumed silica particle-stabilised emulsions of water and perfume oil can be effected in three ways. The transitional inversion from water-in-oil (w/o) to oil-in-water (o/w) occurs upon increasing the particle hydrophilicity for 9 oi... Read More about Phase inversion of particle-stabilised perfume oil-water emulsions: experiment and theory.

Aqueous Foams Stabilized by in Situ Surface Activation of CaCO3 Nanoparticles via Adsorption of Anionic Surfactant (2010)
Journal Article
Cui, Z.-G., Cui, Y.-Z., Cui, C.-F., Chen, Z., & Binks, B. P. (2010). Aqueous Foams Stabilized by in Situ Surface Activation of CaCO3 Nanoparticles via Adsorption of Anionic Surfactant. Langmuir : the ACS journal of surfaces and colloids, 26(15), 12567-12574. https://doi.org/10.1021/la1016559

The in situ surface activation of unmodified CaCO3 nanoparticles by interaction with surfactant in aqueous media has been studied, and the impact of this on the foamability and foam stability of aqueous dispersions was assessed. Using complementary e... Read More about Aqueous Foams Stabilized by in Situ Surface Activation of CaCO3 Nanoparticles via Adsorption of Anionic Surfactant.

Stabilisation of liquid-air surfaces by particles of low surface energy (2010)
Journal Article
Binks, B. P., & Rocher, A. (2010). Stabilisation of liquid-air surfaces by particles of low surface energy. Physical chemistry chemical physics : PCCP, 12(32), 9169-9171. https://doi.org/10.1039/c0cp00777c

We describe the stabilisation of liquid-air surfaces by micro-particles of a low surface energy solid. By varying the surface tension of the liquid, various particle-stabilised materials from oil dispersions to air-in-oil foams to dry water can be pr... Read More about Stabilisation of liquid-air surfaces by particles of low surface energy.

Influence of nanoparticle addition to Winsor surfactant microemulsion systems (2010)
Journal Article
Binks, B., Fletcher, P., & Tian, L. (2010). Influence of nanoparticle addition to Winsor surfactant microemulsion systems. Colloids and surfaces. A, Physicochemical and engineering aspects, 363(1-3), 8-15. https://doi.org/10.1016/j.colsurfa.2010.03.045

The influence of adding negatively charged silica nanoparticles to multiphase Winsor microemulsion systems of cationic surfactant/alcohol cosurfactant is reported. It is found that the particles do not change the salt-induced progression of Winsor sy... Read More about Influence of nanoparticle addition to Winsor surfactant microemulsion systems.

Non-aqueous foams in lubricating oil systems (2010)
Journal Article
Binks, B., Davies, C., Fletcher, P., & Sharp, E. (2010). Non-aqueous foams in lubricating oil systems. Colloids and surfaces. A, Physicochemical and engineering aspects, 360(1-3), 198-204. https://doi.org/10.1016/j.colsurfa.2010.02.028

We have investigated the foaming properties of mixtures of a hydrocarbon oil solvent with various low molar mass, polymeric and overbased detergent particle additives used in lubricating oils. Foam formation occurs only when the additive concentratio... Read More about Non-aqueous foams in lubricating oil systems.

Viscoelastic properties of silica nanoparticle monolayers at the air-water interface (2010)
Journal Article
Zang, D. Y., Rio, E., Langevin, D., Wei, B., & Binks, B. P. (2010). Viscoelastic properties of silica nanoparticle monolayers at the air-water interface. European Physical Journal E, 31(2), 125-134. https://doi.org/10.1140/epje/i2010-10565-7

We have investigated the rheological behaviour of silica nanoparticle layers at the air-water interface. Both compressed and deposited layers have been studied in Langmuir troughs and with a bicone rheometer. The compressed layers are more homogeneou... Read More about Viscoelastic properties of silica nanoparticle monolayers at the air-water interface.

Shearing particle monolayers: Strain-rate frequency superposition (2010)
Journal Article
Zang, D., Langevin, D., Binks, B. P., & Wei, B. (2010). Shearing particle monolayers: Strain-rate frequency superposition. Physical review. E, Statistical, nonlinear, and soft matter physics, 81(1), 011604. https://doi.org/10.1103/PhysRevE.81.011604

We report surface shear rheological measurements on monolayers of silica nanoparticles at the air-water interface. We have used the method of strain-rate frequency superposition (SRFS) to characterize the structural relaxation. We show that the rheol... Read More about Shearing particle monolayers: Strain-rate frequency superposition.

Effects of surfactant structure on the phase inversion of emulsions stabilized by mixtures of silica nanoparticles and cationic surfactant (2009)
Journal Article
Cui, Z. G., Yang, L. L., Cui, Y. Z., & Binks, B. P. (2010). Effects of surfactant structure on the phase inversion of emulsions stabilized by mixtures of silica nanoparticles and cationic surfactant. Langmuir : the ACS journal of surfaces and colloids, 26(7), 4717-4724. https://doi.org/10.1021/la903589e

Silica nanoparticles without any surface modification are not surface active at the toluene-water interface due to their extreme hydrophilicity but can be surface activated in situ by adsorbing cationic surfactant from water. This work investigates t... Read More about Effects of surfactant structure on the phase inversion of emulsions stabilized by mixtures of silica nanoparticles and cationic surfactant.

Inversion of 'dry water' to aqueous foam on addition of surfactant (2009)
Journal Article
Johnson, A. J., Rodrigues, J. A., & Binks, B. P. (2010). Inversion of 'dry water' to aqueous foam on addition of surfactant. Soft matter, 6(1), 126-135. https://doi.org/10.1039/b914706c

Addition of charged surfactant to mixtures of air, water and hydrophobic silica nanoparticles under high shear induces transitional phase inversion from a water-in-air powder to an air-in-water foam. Optical and electron microscopy reveal the non-sph... Read More about Inversion of 'dry water' to aqueous foam on addition of surfactant.

An ellipsometry study of silica nanoparticle layers at the water surface (2009)
Journal Article
Zang, D., Stocco, A., Langevin, D., Wei, B., & Binks, B. P. (2009). An ellipsometry study of silica nanoparticle layers at the water surface. Physical chemistry chemical physics : PCCP, 11(41), 9522-9529. https://doi.org/10.1039/b907903c

We have studied silica nanoparticle layers spread at the air/water interface. The surface pressure of the layers has been determined in a Langmuir trough via two orthogonal Wilhelmy plates. We observed significant differences in surface pressure acco... Read More about An ellipsometry study of silica nanoparticle layers at the water surface.

Influence of surfactant structure on the double inversion of emulsions in the presence of nanoparticles (2009)
Journal Article
Rodrigues, J. A., & Binks, B. P. (2009). Influence of surfactant structure on the double inversion of emulsions in the presence of nanoparticles. Colloids and surfaces. A, Physicochemical and engineering aspects, 345(1-3), 195-201. https://doi.org/10.1016/j.colsurfa.2009.05.001

The double inversion of emulsions from oil-in-water (o/w) to water-in-oil (w/o) and back to o/w is a novel approach developed using oppositely charged mixtures of solid particles and surfactant molecules [B.P. Binks, J.A. Rodrigues, Angew. Chem. Int.... Read More about Influence of surfactant structure on the double inversion of emulsions in the presence of nanoparticles.

Particle-stabilised foams: an interfacial study (2009)
Journal Article
Stocco, A., Drenckhan, W., Rio, E., Langevin, D., & Binks, B. P. (2009). Particle-stabilised foams: an interfacial study. Soft matter, 5(11), 2215-2222. https://doi.org/10.1039/b901180c

In an attempt to elucidate the remarkable stability of foams generated from dispersions of partially hydrophobic nanoparticles (fumed silica), we present investigations into the static and dilational properties of the gas-liquid interfaces of such di... Read More about Particle-stabilised foams: an interfacial study.