Skip to main content

Research Repository

Advanced Search

All Outputs (33)

When humans using the IT artifact becomes IT using the human artifact (2018)
Presentation / Conference Contribution
Lee, A. S., Demetis, D. S., & Lee, A. (2018). When humans using the IT artifact becomes IT using the human artifact. Journal of the Association for Information Systems, 19(10), 929-952. https://doi.org/10.17705/1jais.00514

Following Demetis & Lee (2016) who showed how systems theorizing can be conducted on the basis of a few systems principles, in this conceptual paper, we apply these principles to theorize about the systemic character of technology and investigate the... Read More about When humans using the IT artifact becomes IT using the human artifact.

Insights from easternmost Tethys: Slab rollback, mantle exhumation, and UHT metamorphism in Eastern Indonesia (2018)
Presentation / Conference Contribution
Pownall, J., Hall, R., Forster, M., & Lister, G. (2018). Insights from easternmost Tethys: Slab rollback, mantle exhumation, and UHT metamorphism in Eastern Indonesia. In EGU General Assembly Conference Abstracts

The collision of Australia with SE Asia around 23 million years ago marked the closure of the eastern Tethys. Continued convergence of these two continents has since resulted in a complex array of active subduction zones, young mountain belts, and ne... Read More about Insights from easternmost Tethys: Slab rollback, mantle exhumation, and UHT metamorphism in Eastern Indonesia.

Effect of inorganic ions on pyrite catalyzed Fenton reaction (2018)
Presentation / Conference Contribution
Escobar Castillo, M., Gad-Allah, T. A., Ali, M. E. M., Salem, A. H., Khalil, A. S., Francesconi, M. G., & Lupascu, D. C. (2018). Effect of inorganic ions on pyrite catalyzed Fenton reaction. In Proceedings of the 4th World Congress on New Technologies (NewTech'18). https://doi.org/10.11159/icepr18.145

© 2018, Avestia Publishing. Industrial wastewaters contain not only organic pollutants but also considerable amounts of inorganic ions that may affect the efficiency of wastewater remediation processes. Thus, it is important to study the influence of... Read More about Effect of inorganic ions on pyrite catalyzed Fenton reaction.

A low-angle normal fault earthquake and tsunami: The 1852 Banda Sea Earthquake, Eastern Indonesia (2018)
Presentation / Conference Contribution
Pownall, J., Pranantyo, I., Cummins, P., & Griffin, J. (2018). A low-angle normal fault earthquake and tsunami: The 1852 Banda Sea Earthquake, Eastern Indonesia. In AGU Fall Meeting Abstracts

In November 1852, the Banda Islands, Eastern Indonesia suffered a devastating earthquake which was followed fifteen minutes later by a tsunami with up to eight meters height. Strong shaking was also felt on Ambon, Saparua, and Haruku Islands. The tsu... Read More about A low-angle normal fault earthquake and tsunami: The 1852 Banda Sea Earthquake, Eastern Indonesia.

Infinite Virtual Stoa (2018)
Presentation / Conference Contribution
Torrao, L., Papadopoulos, Y., & Mckie, D. (2018). Infinite Virtual Stoa. In XXI GENERATIVE ART 2018, proceedings of XXI Generative Art conference (183-194)

Stoicism is a philosophy that considers the object of life to be ataraxia (αταραξία), a state of psychological stability which is undisturbed by exposure to phenomena and circumstances that lie outside one's control. Such circumstances may include il... Read More about Infinite Virtual Stoa.

Control of flexible joint robotic manipulator: Design and prototyping (2018)
Presentation / Conference Contribution
Alam, W., Ali, N., Wahaj Aziz, H. M., & Iqbal, J. (2018). Control of flexible joint robotic manipulator: Design and prototyping. In 2018 International Conference on Electrical Engineering (ICEE). https://doi.org/10.1109/ICEE.2018.8566796

Robots are now an integral part of automation sector, thus indicating the importance of the associated control strategies. In contrast with conventional rigid manipulators, flexible arms offer several benefits in terms of light weight and power effic... Read More about Control of flexible joint robotic manipulator: Design and prototyping.

A dependability modeling and analysis approach for an IoP-based service system (2018)
Presentation / Conference Contribution
Mian, Z., Bottaci, L., Jiang, J., He, J., Yu, Q., & Wang, X. (2018). A dependability modeling and analysis approach for an IoP-based service system. In IEEE SmartWorld, Ubiquitous Intelligence & Computing, Advanced & Trusted Computing, Scalable Computing & Communications, Cloud & Big Data Computing, Internet of People and Smart City Innovation (SmartWorld/SCALCOM/UIC/ATC/CBDCom/IOP/SCI) (2036-2041). https://doi.org/10.1109/SmartWorld.2018.00341

The increasing use of the internet of people (IoP) based service systems has the potential to bring about substantial benefits to individuals. An IoP-based service system includes components such as cell phones, wearable devices, smart homes, cars et... Read More about A dependability modeling and analysis approach for an IoP-based service system.

TIMAEUS: Three-dimensional Illuminated Media Augmented Sculptures (2018)
Presentation / Conference Contribution
Torrao, L., Mckie, D., & Papadopoulos, Y. (2018). TIMAEUS: Three-dimensional Illuminated Media Augmented Sculptures. In Proceedings of 20th Generative Art Conference,Soddu C. and Colabella E. (eds), Domus Argenia (459-469)

TIMAEUS is a digital art studio environment that enables creation of personalised 3-dimensional sculptures built with expanding spherical volumes or interconnected tetrahedra and possibly other atomic blocks in the future. These sculptures can be cus... Read More about TIMAEUS: Three-dimensional Illuminated Media Augmented Sculptures.

Geological aspects of Banda Sea ecosystems and how they shape the oceanographical profile (2018)
Presentation / Conference Contribution
Pownall, J. M., Hall, R., Lister, G. S., & Trihatmojo, A. (2018). Geological aspects of Banda Sea ecosystems and how they shape the oceanographical profile. IOP Conference Series: Earth and Environmental Science, 184(conference 1), Article 012005. https://doi.org/10.1088/1755-1315/184/1/012005

The Banda Sea is a collage of young oceanic basins and fragmented Australian continental crust located at the heart of the Australia–SE Asia collision zone where Australian and Asian biogeographic regions converge. The formation of the sea was govern... Read More about Geological aspects of Banda Sea ecosystems and how they shape the oceanographical profile.

Performance of lyotropic liquid crystal-based photoelectrochemical capacitors for solar-to- electrical energy conversion (2018)
Presentation / Conference Contribution
Halls, J. E., Ward, H. J., Althali, A. A., Testut, L., Kocsis, D., Alhassan, H. S., …Wadhawan, J. D. (2018). Performance of lyotropic liquid crystal-based photoelectrochemical capacitors for solar-to- electrical energy conversion. In F. Kongoli, H. Inufasa, M. Boutelle, R. Compton, J. Dubois, & F. Murad (Eds.), Sustainable Industrial Processing Summit SIPS2018 Volume 2. Amatore Intl. Symp. / on Electrochemistry for Sustainable Development (121-130)

Regenerative photoelectrochemical capacitors, adapted from a experimental system previously reported (J. E. Halls, J. D. Wadhawan, Energy Environ. Sci., 2012, 5, 6541) and based on the doping of a lamellar lyotropic liquid crystal with visible light... Read More about Performance of lyotropic liquid crystal-based photoelectrochemical capacitors for solar-to- electrical energy conversion.

Exploring environmental sustainability and performance of global logistics hubs (2018)
Presentation / Conference Contribution
Shaw, S., Grant, D., Hassan, S., & Creazza, A. (2018). Exploring environmental sustainability and performance of global logistics hubs.

Globalization has had different effects on the world since the concept emerged. Globalization impact on supply chains and logistics has revolutionized global trade. It has resulted in new levels of speed, efficiency, effectiveness and endless options... Read More about Exploring environmental sustainability and performance of global logistics hubs.

Development and validation of the Multidimensional Turnover Intentions Scale (2018)
Presentation / Conference Contribution
Menezes, I. G., Menezes, A. C., Ruggeri, K., Moraes, E. R., Lozado, J. A., Sandbrand, D., & Muszynski, P. (2018). Development and validation of the Multidimensional Turnover Intentions Scale. In BAM2018 Conference Proceedings: Driving productivity in uncertain and challenging times

The purpose of this study is to make available to researchers and practitioners a new instrument to measure turnover intentions based on a compensatory Multidimensional Item Response Theory (MIRT) model. Since extrinsic and intrinsic aspects are meas... Read More about Development and validation of the Multidimensional Turnover Intentions Scale.

Towards Low-Cost Image-based Plant Phenotyping using Reduced-Parameter CNN. (2018)
Presentation / Conference Contribution
Atanbori, J., Chen, F., French, A. P., & Pridmore, T. (2018, September). Towards Low-Cost Image-based Plant Phenotyping using Reduced-Parameter CNN. Paper presented at British Machine Vision Conference 2018, BMVC 2018, Northumbria University

© 2018. The copyright of this document resides with its authors. Segmentation is the core of most plant phenotyping applications. Current state-of-the-art plant phenotyping applications rely on deep Convolutional Neural Networks (CNNs). However, thes... Read More about Towards Low-Cost Image-based Plant Phenotyping using Reduced-Parameter CNN..

Thermoelectric Element Geometry Optimization for Maximum Hybrid Photovoltaic-Thermoelectric System Efficiency (2018)
Presentation / Conference Contribution
Shittu, S., Li, G., Zhao, X., & Ma, X. (2018, August). Thermoelectric Element Geometry Optimization for Maximum Hybrid Photovoltaic-Thermoelectric System Efficiency. Paper presented at 17th International Conference on Sustainable Energy Technologies (SET 2018), Wuhan, China

The geometry of thermoelectric elements in a hybrid Photovoltaic-Thermoelectric (PV-TE) power generation system can influence the conversion efficiency of the hybrid system. Therefore, this study investigates the optimum geometry for maximum conversi... Read More about Thermoelectric Element Geometry Optimization for Maximum Hybrid Photovoltaic-Thermoelectric System Efficiency.

Thin Implicit Utah Teapot: Design for Additive Manufacturing (2018)
Presentation / Conference Contribution
Qi, Q., & Li, Q. (2018). Thin Implicit Utah Teapot: Design for Additive Manufacturing. In 2018 IEEE International Conference on Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData) (1933-1940). https://doi.org/10.1109/Cybermatics_2018.2018.00320

© 2018 IEEE. Converting a surface-based geometric object into a thin solid is an essential requirement for additive manufacturing. Although offset surface and thickening techniques have been widely used for this task, it is in general difficult to mo... Read More about Thin Implicit Utah Teapot: Design for Additive Manufacturing.

Taxi model of unmanned aerial vehicle: Formulation and simulation (2018)
Presentation / Conference Contribution
Wasim, M., Ullah, M., & Iqbal, J. (2018). Taxi model of unmanned aerial vehicle: Formulation and simulation. In 2018 1st International Conference on Power, Energy and Smart Grid (ICPESG). https://doi.org/10.1109/ICPESG.2018.8384506

Unmanned Aerial Vehicles cannot work efficiently without a control system. Before any form of control is applied to it, modeling of the system is necessary. This work focuses on the development of a Taxi model of UAV. The reformulated model has been... Read More about Taxi model of unmanned aerial vehicle: Formulation and simulation.

Towards efficient loading of change-based models (2018)
Presentation / Conference Contribution
Yohannis, A., Rodriguez, H. H., Polack, F., & Kolovos, D. (2018). Towards efficient loading of change-based models. Lecture notes in computer science, 10890 LNCS, 235-250. https://doi.org/10.1007/978-3-319-92997-2_15

This paper proposes and evaluates an efficient approach for loading models stored in a change-based format. The work builds on language-independent change-based persistence (CBP) of models conforming to object-oriented metamodelling architectures suc... Read More about Towards efficient loading of change-based models.

CFD analysis and experimental validation of magnetic droplet generation and deflection across multilaminar flow streams (2018)
Presentation / Conference Contribution
Gómez-Pastora, J., Karampelas, I. H., Alorabi, A. Q., Tarn, M. D., Bringas, E., Iles, A., …Ortiz, I. (2018). CFD analysis and experimental validation of magnetic droplet generation and deflection across multilaminar flow streams. In Biotech, biomaterials and biomedical: TechConnect briefs 2018 (182-185)

© 2018 OOSV. All rights reserved. The use of droplet-based microfluidic systems has increased in the last decade due to the advantages these systems present such as compatibility with many chemical and biological reagents, capability of performing a... Read More about CFD analysis and experimental validation of magnetic droplet generation and deflection across multilaminar flow streams.